纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	900 × 600 × 760 mm
Overall footprint	900 x 600 x 760 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Static worktop load	30 kg uniformly distributed load on the horizontal work surface
Tilted-position load	15 kg maximum equipment load when the top is locked at an inclined angle
Rack load capacity	5 kg uniformly distributed load on the under-top slatted rack
Caster load rating	40 kg per caster dynamic rating, providing redundant four-point support
Height-adjustment durability	2,000 height-setting cycles without loss of collar engagement
Tilt mechanism durability	3,000 tilt-lock cycles using the indexed rotary knob
Stability criterion	No overturning when a 10 kg vertical load is applied 100 mm inside the front edge
Mobility resistance	Four casters roll over level carpet or hard flooring with a push force below 150 N under full 30 kg load
Reference Static Load	150 kg depending on category
Moving-part Durability Reference	Acceptance target 50000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Worktop panel	25 mm light gray laminated particleboard panel with sealed substrate and smooth wear-resistant surface
Worktop edge	2 mm black PVC edge band bonded around the panel perimeter for impact and chip protection
Outer support legs	50 mm light gray powder-coated welded steel tubes with splayed four-point base geometry
Inner height columns	40 mm silver-gray steel telescoping tubes locked by indexed collar clamps
Tilt pivot assembly	70 mm steel pivot shaft with glass-fiber-reinforced nylon locking hub and black rotary knob
Joint covers	Black injection-molded PP or ABS covers at leg braces, caster sockets, and pivot housings
Modesty panel	18 mm light gray laminated particleboard panel fixed between the front support columns
Under-top rack	Black powder-coated steel slat rack with four transverse bars and side mounting plate
Caster wheels	Four twin-wheel nylon casters with polypropylene hubs, black thermoplastic rubber treads, and swivel forks
Caster brake components	Black steel or nylon brake tabs on each swivel fork for wheel locking
Fasteners	Zinc-plated steel bolts, washers, and threaded inserts at pivot, rack, and leg joints
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Top tilt angle	90 degrees from horizontal to near-vertical display position
Worktop tilt	Indexed knob locks the worktop from 0 degrees horizontal through 90 degrees near-vertical presentation angle
Tilt locking	Rotary knob engages positive detents and clamps both sides of the pivot hub, preventing unintended drift
Height adjustment	Manual telescoping columns set the work surface from 680 mm to 760 mm, published value 760 mm, using collar releases
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

该模块暂无数据。

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

该市场暂无标准数据。

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

北美市场选型与验收参考	ANSI/BIFMA X5.5 办公桌及桌类产品

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

该市场暂无标准数据。

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. 技术标准与检测报告由供应商在投标或采购确认阶段提供；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · MBL-WEDGE-4C-760

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · MBL-WEDGE-4C-760

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · MBL-WEDGE-4C-760打开导出工具

页面快速操作

发布采购询价

产品描述

The Mobile Height-Adjustable Wedge-Shaped Tilting Laptop Table, model MBL-WEDGE-4C-760, is an unbranded mobile laptop and presentation table designed for flexible working, training, collaboration, and display use. Its wedge-shaped worktop and light gray finish create a clean, functional appearance, while the splayed four-point steel base, white modesty panel, and black joint components provide visual contrast and a structured commercial look. The overall footprint is 900 x 600 x 760 mm, and the table moves on four swivel twin-wheel casters suited to rooms where the workstation must be repositioned during the day. The work surface is a 25 mm light gray laminated particleboard panel with a sealed substrate and a smooth, wear-resistant laminated face. A 2 mm black PVC edge band is bonded around the perimeter to protect against chipping and impact. The outer support structure uses 50 mm light gray powder-coated welded steel tubes arranged in a splayed four-point base. Height is set manually through silver-gray telescoping steel columns with indexed collar clamps, allowing the surface height to be adjusted from 680 mm to 760 mm. Black injection-molded PP or ABS covers finish the leg braces, caster sockets, and pivot housings. A central practical feature is the tilting top. The indexed rotary knob locks the worktop from a horizontal position through to a near-vertical presentation angle, supporting use as a laptop desk, reading surface, drafting support, or display stand. The knob engages positive detents and clamps both sides of the glass-fiber-reinforced nylon locking hub on the 70 mm steel pivot shaft, helping prevent unintended movement. The horizontal work surface supports a 30 kg uniformly distributed load. When the top is locked in an inclined position, the maximum equipment load is 15 kg. The under-top black powder-coated steel slatted rack provides additional storage with four transverse bars and a 5 kg uniformly distributed load capacity. Mobility is provided by four twin-wheel nylon casters with polypropylene hubs, black thermoplastic rubber treads, and swivel forks. Each caster has a 40 kg dynamic load rating, and the four-point arrangement gives redundant support. The table is appropriate for offices, classrooms, training rooms, libraries, co-working spaces, reception areas, and residential studies or home offices where occasional reconfiguration is useful. Procurement teams should allow for assembly and receiving logistics: the product is supplied as one set in two cartons, with a reference assembly time of 40 minutes, packaged gross weight of 120 kg, and packaging volume of 0.8 cubic meters per set. Buyers should also match equipment weight to the horizontal or tilted load ratings and confirm that the published height range and mobile base suit the intended flooring and workspace layout.

Mobile Height-Adjustable Wedge-Shaped Tilting Laptop Table Specifications

供应商与现货