纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1200 × 500 × 750 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended distributed tabletop load	60 kg
Static load acceptance target	100 kg
Caster individual load capacity	30 kg
Recommended users	2 persons
Table weight reference	28 kg
Caster rolling durability target	20000 cycles
Fold mechanism operating cycles	10000 cycles
Top surface impact acceptance	1800 N spot load
Reference Static Load	150 kg depending on category
Moving-part Durability Reference	Acceptance target 50000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Worktop substrate	25 mm wood-based composite panel with light oak-look melamine laminate face
Worktop edge	2 mm PVC or ABS impact-resistant edge band in matching light tone
Modesty panel	18 mm wood-based composite panel with dark walnut-look melamine finish
Vertical support legs	40 x 40 mm powder-coated white steel square tubes with 1.5 mm target wall
Floor foot beams	Rectangular white powder-coated steel cantilever beams with gray end caps
Under-top rails	White powder-coated steel folding rails and pivot brackets with black release levers
Cable tray	Perforated light-gray steel sheet with rounded slots and formed edges
Caster wheels	50 mm black nylon or polyurethane twin wheels with white polypropylene housings
Hardware	Zinc-plated or blackened steel pivot pins, bolts, lock cams, and axle fasteners
Surface finish	Smooth low-sheen laminate on panels and textured white powder coating on steel
Modesty panel edge	Sealed matching laminate edge banding on exposed top, bottom, and side edges
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Flip-top mechanism	Side black release levers unlock the top for vertical nesting and return it to horizontal use
Horizontal lock position	Mechanical cam lock secures the tabletop at 0 degrees for normal writing and laptop use
Vertical nest position	Top pivots to 85 degrees for row nesting and reduced storage depth
Mobility system	Four swivel twin-wheel casters allow movement by one person and 360-degree steering
Caster brake provision	Specify two locking casters for room layouts if the supplied wheels do not include brakes
Cable management	Perforated 1000 mm steel tray routes power strips, adapters, and laptop cables below the rear edge
Nesting storage	Tables align in rows when flipped, with a target storage pitch of 220 mm per table
Seated privacy barrier	Full-width walnut-look panel shields seated users' legs from front view
Quick room reconfiguration	Light 28 kg target weight and four swivel casters support classroom-to-exam layouts without tools
Tool-free operation	Fold release uses hand levers rather than bolts for daily conversion
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Training classroom	Suitable for two-person laptop or workbook setups where instructors need fast row rearrangement
Meeting room	Usable for temporary committee tables, workshops, or hotelling workstations
Examination and testing center	Rows can be compactly stored, then deployed for spaced individual seating positions
Open-plan office project area	Provides a mobile writing and laptop surface for short-term team tasks
Education or seminar venue	Durable laminate top and modesty panel fit daily adult learning environments
Storage room	Flipped tables nest compactly when floor space is needed for other activities

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 527-1:2011 applicability	Office worktables and desks: dimensions, safety, and structural requirements
EN 527-2:2002 applicability	Mechanical safety, stability, and durability test methods for office tables
EN 1729-1:2015 applicability	Furniture for educational institutions: safety and functional requirements
EN 1729-2:2015 applicability	Test methods and durability requirements for educational furniture
EN 13986:2004+A1:2015 applicability	Wood-based panels for building and furniture construction, including declared performance

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.5

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2024 applicability	General technical requirements for wooden furniture, applicable to the laminate wood-based panels and edge quality
GB/T 3325-2017 applicability	Metal furniture technical requirements applicable to the steel folding frame, welds, and coating
GB 18580-2017 applicability	Formaldehyde emission limits for wood-based panels used in the worktop and modesty panel
GB/T 10357.1-2989 series applicability	Furniture mechanical test methods for table strength, stability, and durability

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2024 applicability：General technical requirements for wooden furniture, applicable to the laminate wood-based panels and edge quality；
2. GB/T 3325-2017 applicability：Metal furniture technical requirements applicable to the steel folding frame, welds, and coating；
3. GB 18580-2017 applicability：Formaldehyde emission limits for wood-based panels used in the worktop and modesty panel；
4. GB/T 10357.1-2989 series applicability：Furniture mechanical test methods for table strength, stability, and durability；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · MFT-1200-WHT-WAL

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · MFT-1200-WHT-WAL

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · MFT-1200-WHT-WAL打开导出工具

页面快速操作

发布采购询价

产品描述

The Mobile Flip-Top Training Table with Walnut Modesty Panel, model MFT-1200-WHT-WAL, is an unbranded, two-tone table designed for flexible learning, meeting, and workspace layouts. Its light oak-look worktop is paired with a dark walnut-look modesty panel, while the white powder-coated steel frame creates a clean commercial appearance suited to neutral interiors. The rectangular top is supported by square steel legs and cantilevered floor beams, with folding rails, pivot brackets, and black side release levers visible beneath the surface. Gray end caps and light-gray cable-management hardware provide restrained visual contrast. Construction combines a 25 mm wood-based composite substrate with a melamine laminate face and a 2 mm matching light-tone PVC or ABS impact-resistant edge. The modesty panel uses an 18 mm wood-based composite panel with a dark walnut-look melamine finish. The 40 by 40 mm white steel legs have a target wall thickness of 1.5 mm, and the under-top structure includes powder-coated folding rails and pivoting brackets. Hardware consists of zinc-plated or blackened steel pins, bolts, lock cams, and axle fasteners. A perforated light-gray steel tray with rounded slots and formed edges sits below the rear edge, and four swivel twin-wheel casters carry the table. The black nylon or polyurethane wheels are 50 mm and paired with white polypropylene housings. Functionally, the table is built for rapid reconfiguration. The black release levers unlock the top, which pivots from a horizontal working position to an 85-degree nesting position. A mechanical cam lock secures the top at zero degrees for writing and laptop use, while the vertical position allows tables to align in rows and reduce storage depth, with a target storage pitch of 220 mm per table. Four swivel casters provide 360-degree steering and allow movement by one person. If the supplied casters do not include brakes, two locking casters should be specified for stable room layouts. The 1000 mm perforated steel tray routes power strips, adapters, and laptop cables away from the work surface. The table is suited to training classrooms, seminar venues, examination centers, temporary meeting rooms, hotelling stations, workshops, and open-plan project areas. It accommodates two users for laptop or workbook tasks and offers a recommended distributed tabletop load of 60 kg, with a static load acceptance target of 100 kg. Each caster has an individual load capacity of 30 kg. The product is also practical where tables must be compactly stored between sessions. For procurement, confirm caster brake requirements, room flooring conditions, assembly resources, and storage space before ordering. Each set ships in two cartons, with a reference packaged gross weight of 120 kg, packaging volume of 0.8 cubic meters, and assembly time of 40 minutes per set.

Mobile Flip-Top Training Table with Walnut Modesty Panel Specifications

供应商与现货