纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1200 × 500 × 750 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net product weight	26 kg
Distributed tabletop load	80 kg
Single-point vertical load	30 kg
Caster individual load rating	40 kg
Recommended occupants	1 person per 1200 mm single table; 2 people when tables are ganged
Rolling durability target	20,000 cycles
Modesty panel impact resistance	10 kg impact at 100 mm drop
Edge impact resistance	30 kg at 100 mm drop
Reference Static Load	150 kg depending on category
Moving-part Durability Reference	Acceptance target 50000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Work surface	25 mm particleboard core with light maple-woodgrain high-pressure laminate facing
Edge banding	2 mm PVC edge in matching maple tone with sealed corners
Modesty panel	18 mm melamine-faced wood-based panel with maple-woodgrain finish
Steel frame	40 x 40 mm light gray powder-coated welded steel tube and crossbeam
Pivot assemblies	Black molded or die-cast side brackets with steel hinge axle and white index dial
Caster wheels	50 mm white nylon twin wheels with black rubberized tread and swivel kingpin
Caster brake hardware	Black nylon brake lever and steel mounting stem on each caster
Hardware	Zinc-plated steel bolts, axle pins, and locking washers for frame and pivot joints
Underside support rail	Rectangular steel cross rail bonded and bolted beneath the tabletop
Surface finish	Low-sheen woodgrain laminate with smooth cleanable face
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints
Reference Finish / Color Count	Recommended 6finish options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Flip-top mechanism	Side pivot brackets rotate the tabletop from 0 degree horizontal use to 90 degree vertical storage
Nesting storage	Folded tables can nest in line with 280 mm stored depth per table
Tabletop lock	Mechanical index dial locks the horizontal work position and releases for vertical folding
Mobile movement	Four swivel twin-wheel casters allow 360 degree repositioning on smooth indoor floors
Individual wheel brakes	Four lever brakes lock wheel rotation for stationary room layouts
Ganging compatibility	Recticular 1200 mm tops can be placed side by side to form continuous training runs
Cable management clearance	680 mm high under-top bay allows loose laptop and presentation cables to pass behind modesty panel
Quick room reset	Two-person handling and 50 minute assembly time support frequent classroom conversion
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Training classrooms	Foldable 1200 mm single tables support flexible rows, exams, and group workshops
Meeting rooms	Wheeled bases allow quick conversion from boardroom layout to small-group clusters
Co-working spaces	Light maple finish and compact 500 mm depth suit shared hot-desk and touchdown zones
Temporary exam setups	Locking twin casters keep rows stable during use and permit fast storage afterward
Education centers	Modesty panel and durable laminate suit daily student use with laptop and writing materials
Multipurpose halls	Vertical nesting reduces stored footprint when the room is needed for events
Project work areas	Ganged tables create continuous surfaces for manuals, laptops, and small equipment

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 527-2 office desk safety	Mechanical safety requirements applicable to adjustable or mobile office worktables
EN 527-3 test methods	Desk stability, strength, and durability test methods for procurement inspection
EN 15372 office furniture strength	Durability and strength requirements for non-domestic storage and work surfaces
EN 13986 panel performance	Wood-based panel standard supporting board properties and formaldehyde documentation
EN 12529 caster suitability	Swivel castor standard relevant to furniture casters on hard and soft floors

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.5

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324 dimensional and structural suitability	General technical specification applicable to wooden-panel office furniture acceptance
GB/T 3325 metal furniture suitability	Metal furniture standard relevant to the coated steel frame and welded joints
GB 18580 emission testing	Formaldehyde emission requirement for wood-based panel components
GB/T 10357.6 load testing	Table mechanical stability and load-performance test method suitable for acceptance

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324 dimensional and structural suitability：General technical specification applicable to wooden-panel office furniture acceptance；
2. GB/T 3325 metal furniture suitability：Metal furniture standard relevant to the coated steel frame and welded joints；
3. GB 18580 emission testing：Formaldehyde emission requirement for wood-based panel components；
4. GB/T 10357.6 load testing：Table mechanical stability and load-performance test method suitable for acceptance；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · MFT-M1200-MAP-C

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · MFT-M1200-MAP-C

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · MFT-M1200-MAP-C打开导出工具

页面快速操作

发布采购询价

产品描述

The Mobile Flip-Top Nesting Training Table with Maple Laminate Top and Casters is a practical workplace and education furniture solution designed for spaces that change frequently between individual work, group training, meetings, and events. Its rectangular tabletop presents a light maple-woodgrain surface supported by a light gray steel frame, with a matching modesty panel beneath the rear edge. In use, the table has a clean, functional profile; when folded, the top rotates vertically so multiple tables can nest in line, reducing the space required for storage. The work surface uses a 25 mm particleboard core with a light maple high-pressure laminate facing, finished with 2 mm matching maple-tone PVC edge banding and sealed corners. The modesty panel is an 18 mm melamine-faced, wood-based panel with a maple-woodgrain appearance. Construction centers on a welded 40 x 40 mm powder-coated steel tube frame and crossbeam, reinforced by a rectangular steel support rail bonded and bolted beneath the tabletop. Black molded or die-cast side brackets, a steel hinge axle, and a white index dial form the pivot assembly. Zinc-plated bolts, axle pins, and locking washers secure the frame and pivot joints. Mobility is provided by four swivel casters with 50 mm white nylon twin wheels, black rubberized treads, and swivel kingpins. Each caster includes a black nylon brake lever and steel mounting stem, allowing the table to roll into position and then remain fixed. The mechanical index dial locks the tabletop horizontally for use and releases it to rotate through to a vertical storage position. Folded tables nest with a 280 mm stored depth per table. The under-top bay also leaves room for loose laptop and presentation cables to pass behind the modesty panel. The single 1200 mm table is intended for one occupant, while two people can be accommodated when tables are ganged. Tables can be placed side by side to create continuous training runs, making the system suitable for classrooms, exam layouts, workshops, meeting rooms, co-working touchdown areas, education centers, and multipurpose halls. The light maple finish suits shared and active environments, while the wheeled base supports rapid transitions between boardroom rows, small-group clusters, and open event space. Procurement planning should account for mobility on smooth indoor floors, the need for staff to operate the index dial and wheel brakes, and available nesting storage space. Each set is supplied in two cartons and requires assembly, with a reference assembly time of 40 minutes per set. Buyers should also confirm loading requirements, intended ganging layouts, and storage access before quantity confirmation. The table supports a distributed tabletop load of 80 kg and a single-point vertical load of 30 kg.

Mobile Flip-Top Nesting Training Table with Maple Laminate Top and Casters Specifications

供应商与现货