纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1200 × 500 × 750 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended user capacity	1 person
Static desktop load	50 kg
Recommended moving load	30 kg
Modesty panel impact rating	15 kg lateral force
Caster load rating	40 kg per set of four
Product net weight	24 kg
Stacking/nesting depth in folded row	180 mm per desk
Service life target	5 years
Reference Static Load	150 kg depending on category
Moving-part Durability Reference	Acceptance target 50000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Work surface	25 mm wood-based panel with light oak melamine laminate and sealed straight edge
Modesty panel	18 mm wood-based panel with matching light oak melamine laminate
Vertical supports	White powder-coated rectangular steel posts, 60 x 40 mm tube, 1.5 mm wall
Lower T-feet	Polished chrome-plated steel cantilever feet with welded or bolted post sockets
Casters	Four black nylon twin-wheel swivel casters with visible brake pedals on at least two units
Folding pivot hardware	Black glass-filled nylon release levers and steel pivot brackets under both top corners
Cross beam	White powder-coated rectangular steel cross tube connecting the two leg frames
Cable/equipment rail	Grey perforated steel sheet, 1.0 mm thick, mounted beneath the top
Fasteners	Zinc-plated or blackened steel bolts, pivot pins, and barrel hinges for the flip mechanism
Edge treatment	PVC or ABS edge banding in matching oak tone on the top and modesty panel
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints
Reference Finish / Color Count	Recommended 6finish options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Flip-top mechanism	Side release levers unlock both under-top pivots so the top rotates from horizontal use to vertical storage
Top fold angle	90 degrees from horizontal work position to vertical nested position
Nesting configuration	Folded desks can be pushed together in rows with an 180 mm depth allowance per desk
Mobility	Four swivel casters allow lateral repositioning by one person on carpet tile or hard floors
Braking	Two or more wheel-mounted brake pedals lock the desk during writing or training use
Privacy screening	The front modesty panel shields the seated user's leg area and stiffens the front frame
Cable or accessory management	The perforated under-top rail provides ventilation and tie points for cables or a slim power strip
Reconfiguration use	The desk supports rapid classroom-to-exam or meeting-to-training layouts without tools
Resting surface	Horizontal top is fixed by the pivot locks during use and is not designed for height adjustment
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Training rooms	Suitable for one-person laptop, writing, or exam positions in 1200 mm-wide rows
Flexible meeting spaces	Teams can roll, brake, fold, and nest desks to change room configuration quickly
Classrooms and seminar rooms	The modesty panel improves leg privacy while the perforated rail supports cable organization
Co-working areas	Neutral light oak and white-metal finish fits shared touchdown and project spaces
Temporary exam or registration layouts	Braked casters allow precise placement and locked stationary use
Small office touch-down zones	One desk provides a compact 1200 x 500 mm footprint for individual computer work

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 527-1:2011	Applicable standards and test results require confirmation
EN 527-2:2002	Mechanical safety requirements for office desks, including strength and stability tests
EN 15372:2016	Safety, strength, and durability requirements for non-domestic storage and related furniture, relevant to commercial training use
EN 12521:2015	Safety, strength, and durability requirements for domestic tables, useful as a minimum structural benchmark

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

北美市场选型与验收参考	ANSI/BIFMA X5.5 办公桌及桌类产品

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2024	General technical requirements for wooden furniture, applicable to the laminated panels and edge quality
GB/T 3325-2017	General technical requirements for metal furniture, applicable to steel legs, feet, and welded hardware
GB/T 10357.5-2011	Furniture surface mechanical test for coatings, applicable to laminate wear, impact, and stain acceptance
GB/T 10357.7-2013	Table strength and stability test methods, applicable to desktop load and tipping checks
GB 18584-2001	Indoor wooden furniture limit for formaldehyde emission, applicable to panel substrate acceptance

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2024：General technical requirements for wooden furniture, applicable to the laminated panels and edge quality；
2. GB/T 3325-2017：General technical requirements for metal furniture, applicable to steel legs, feet, and welded hardware；
3. GB/T 10357.5-2011：Furniture surface mechanical test for coatings, applicable to laminate wear, impact, and stain acceptance；
4. GB/T 10357.7-2013：Table strength and stability test methods, applicable to desktop load and tipping checks；
5. GB 18584-2001：Indoor wooden furniture limit for formaldehyde emission, applicable to panel substrate acceptance；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · MFT-OAK-1200-500-W

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · MFT-OAK-1200-500-W

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · MFT-OAK-1200-500-W打开导出工具

页面快速操作

发布采购询价

产品描述

The Mobile Flip-Top Training Desk with Oak-Laminate Top and Modesty Panel is a flexible individual workstation designed for spaces that frequently change between training, meeting, examination, and focused-work layouts. Its light oak-look work surface and white metal frame give a clean, neutral appearance, while the front modesty panel provides visual privacy for the seated user and contributes to the structure of the desk. In use, the rectangular top presents a single-person writing or laptop surface supported by two vertical leg frames, a cross beam, T-shaped feet, and four swivel casters. When released, the top rotates 90 degrees from the horizontal work position to a vertical nesting position, allowing desks to be pushed together in compact rows. The 25 mm work surface is made from wood-based board with light oak melamine laminate and a sealed straight edge. The matching 18 mm modesty panel uses the same light oak finish. Vertical supports are white powder-coated rectangular steel posts, joined by a matching powder-coated steel cross tube. The lower cantilever feet are polished chrome-plated steel, with welded or bolted post sockets. Primary load-bearing components provide a 40 mm structural thickness according to role, and moving hardware maintains a 5 mm operating clearance. Mobility is provided by four black nylon twin-wheel swivel casters, with visible brake pedals on at least two units. The brakes let users lock the desk for writing or training, while the swivel design supports repositioning by one person on carpet tile or hard floors. Under the top, black glass-filled nylon release levers and steel pivot brackets control the folding action. A grey perforated steel rail beneath the work surface offers ventilation and tie points for cables or a slim power strip. The desk is rated for a 50 kg static desktop load, a 30 kg recommended moving load, and a caster load rating of 40 kg per set of four. The modesty panel is rated for 15 kg of lateral force. This model is well suited to training rooms, classrooms, seminar rooms, flexible meeting areas, co-working spaces, temporary registration layouts, and small office touchdown zones. It supports one-person laptop, writing, or exam positions and can be rolled, braked, folded, and nested to alter room configuration quickly. Folded rows require an 180 mm depth allowance per desk, making the design useful where floor space must be cleared between sessions. Procurement teams should plan for one set supplied in two cartons, with a reference assembly time of 40 minutes per set. The reference packaged gross weight is 120 kg per set and the reference packaging volume is 0.8 cubic meters per set. The product net weight is 24 kg. Buyers should also confirm site flooring, storage lanes, cable-management needs, and the number of desks required for planned row layouts before purchase.

Mobile Flip-Top Training Desk with Oak-Laminate Top and Modesty Panel Specifications

供应商与现货