纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1200 × 500 × 750 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	28 kg
Distributed tabletop load	80 kg
Single-point load on top	25 kg
Seating capacity	1 person
Caster dynamic load per set	120 kg total
Recommended floor surface	Level carpet tile, vinyl, wood, or laminate flooring
Flip-and-nest cycle target	10,000 cycles
Caster rolling durability target	20,000 m
Warranty period	3 years
Color options in visible finish group	2 colors, light gray panels and black frame with chrome feet

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop substrate	25 mm engineered wood panel with light gray laminate face
Tabletop edge protection	Black PVC or ABS impact edge band around the perimeter
Folding crossbeam	70 mm black powder-coated steel tube with pivot end castings
Vertical supports	60 mm black powder-coated round steel columns
Modesty panel	18 mm light gray laminate-faced engineered wood panel with rounded corners
Floor feet	Polished chrome-plated steel two-prong bases
Caster wheels	White nylon or polypropylene twin wheels with black thermoplastic treads
Caster brackets	Zinc-plated or chrome-finished steel swivel yokes
Pivot housing	Glass-fiber-reinforced nylon or die-cast end housing with steel axle
Fasteners	Zinc-plated steel bolts, nuts, and pivot pins
Surface finish on metal frame	Epoxy-polyester powder coating, 1.2 mm target film thickness
Steel wall thickness target	1.5 mm tubing and 2.0 mm foot plate

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Tabletop folding operation	Side lever releases the pivot lock and rotates the top into vertical nesting position
Pivot rotation angle	90 degrees between horizontal use and vertical nest position
Locked use position	Positive latch holds the tabletop horizontally at 750 mm working height
Nesting layout	Tables can be pushed together in line after tops are flipped, reducing storage depth
Mobility hardware	Four swivel twin-wheel casters, one at each foot end, enable 360-degree repositioning
Parking stability	Each caster uses a side brake lever for stationary classroom layouts
Modesty screening	Full-width panel shields the seated user's leg area from front view
Cable and beam routing	The black upper beam provides a structural route and can support optional clip-on cable trays
Room reconfiguration	One person can roll, nest, and reopen each place using the side release lever
Floor protection	Twin-wheel design spreads load and reduces point pressure on hard floors
Stacking limitation	Units nest side by side but are not designed for vertical stacking
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Training classroom	Suitable for one-person laptop, writing, and exam layouts where rows must change frequently
Conference breakout room	Provides a compact mobile surface for temporary small-group meetings
Coworking space	Supports flexible hot-desking and short-term project workplaces
Education center	Fits reconfigurable lessons, seminars, and examination rooms
Temporary registration area	Can be rolled into reception or event spaces for check-in terminals and documents
Storage room layout	Vertical flipped tops can be nested together when not in use
Recommended pairing	Pair with armless or flip-seat nesting chairs to maintain compact row storage

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Safety and strength	EN 15372:2016 applies to non-domiciliary storage and work-surface strength requirements for contract furniture
Stability	EN 1730:2000 test method supports table stability assessment under the selected EN 15372 loads
Formaldehyde emissions	EN 13986:2004+A1:2015 supports wood-panel E1 classification documentation
Office work surface dimensions	EN 527:2011 provides dimensional and safety reference for office desk-type applications

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.5

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Safety, strength, and durability	GB/T 3324applies as acceptance reference for wooden furniture dimensions, materials, and structural performance
Formaldehyde emission	GB 18580applies to the engineered wood tabletop and modesty panel emission declaration
Office furniture mechanical testing	GB/T 38607applies to table stability, load, and durability acceptance for commercial use
Fixed-furniture fire safety review	GB 20286 may be specified only if public-space flame-retardant requirements apply

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Safety, strength, and durability：GB/T 3324applies as acceptance reference for wooden furniture dimensions, materials, and structural performance；
2. Formaldehyde emission：GB 18580applies to the engineered wood tabletop and modesty panel emission declaration；
3. Office furniture mechanical testing：GB/T 38607applies to table stability, load, and durability acceptance for commercial use；
4. Fixed-furniture fire safety review：GB 20286 may be specified only if public-space flame-retardant requirements apply；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · MFT-1200-4C-W

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · MFT-1200-4C-W

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · MFT-1200-4C-W打开导出工具

页面快速操作

发布采购询价

产品描述

The Mobile Flip-Top Training Table with Casters and Modesty Panel, model MFT-1200C-W, offers a practical reconfigurable surface for spaces that alternate between individual work, group activities, and compact storage. Its design pairs a light gray laminate-faced tabletop and modesty panel with a black steel folding beam and round support columns, polished chrome-plated two-prong feet, and white twin-wheel casters with black thermoplastic treads. The contrasting finishes give the table a clean, functional appearance suited to training and commercial interiors. The full-width modesty panel has rounded corners and screens the seated user’s leg area from the front, while the feet and caster arrangement keep the visual base open and easy to maneuver. Each table provides a one-person workplace with the tabletop locked horizontally at a 750 mm working height. A side lever releases the pivot lock, allowing the top to rotate 90 degrees from a horizontal use position to a vertical nesting position. After flipping, tables can be pushed together in line to reduce storage depth. Four swivel twin-wheel casters, positioned one at each foot end, support 360-degree repositioning, and side brake levers help hold the table in place for stationary classroom layouts. Construction centers on a 25 mm engineered wood tabletop substrate with a light gray laminate face and a black PVC or ABS impact edge band around the perimeter. Primary component thickness is specified as 40 mm according to its load-bearing role, with a 5 mm clearance for hardware and moving parts. The folding crossbeam is a 70 mm black powder-coated steel tube with pivot end castings, supported by 60 mm black powder-coated round steel columns. The pivot housing uses glass-fiber-reinforced nylon or a die-cast end housing with a steel axle, while caster brackets are zinc-plated or chrome-finished steel swivel yokes. The table has a net weight of 28 kg and is rated for an 80 kg distributed tabletop load, a 25 kg single-point load, and 120 kg total dynamic caster load per set. It is intended for level carpet tile, vinyl, wood, or laminate flooring. The table suits training classrooms, conference breakout rooms, coworking spaces, education centers, temporary registration areas, and storage-room nesting layouts. It supports laptop use, writing, exams, short-term project work, seminars, and check-in terminals where layouts change frequently. For procurement, note that one set ships in two cartons, with reference assembly time of 40 minutes per set, 0.8 cubic meter packaging volume, and 120 kg packaged gross weight. Buyers should also plan storage space around the nested footprint, floor compatibility, access for movement between rooms, and the need for staff to operate the flip latch and caster brakes correctly.

Mobile Flip-Top Training Table with Casters and Modesty Panel Specifications

供应商与现货