纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	3200 × 800 × 750 mm
Overall footprint	3200 x 800 x 750 mm
Single worktop thickness	25 mm
Leg column cross-section	80 x 50 mm
Horizontal support beam depth	100 mm
Seated knee clearance height	680 mm
Knee clearance depth per user	740 mm
Work surface edge banding thickness	2 mm
Adjustable levelling foot diameter	50 mm
Total height adjustment range	650 mm
Center gap between adjacent worktops	0 mm
Finished Top Thickness	50 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Per-workstation static load capacity	120 kg
Total product net weight	150 kg
Vertical lifting speed	38 mm/s
Height adjustment cycle rating	10000 full cycles
Maximum recommended user weight plus equipment per station	136 kg
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test
Recommended Procurement Warranty	Structure 5 years; hardware 3 years; finish 2 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Work surface core	18mm high density particleboard core
Work surface finish	Light grey high-pressure laminate (HPL) wear layer
Edge banding	2mm matching light beige ABS edging
Lifting leg columns	Cold-rolled steel powder coated white
Support frame and cross beams	2mm thick cold-rolled steel powder coated white
Levelling glides	Injection-moulded black nylon non-marking pads
Lifting actuator internal components	Steel lead screw with polymer bearing guides
Control switch housing	Black ABS plastic
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Electric height adjustment	Dual-motor system per desk unit, travel 650mm from seated to standing height
Anti-collision protection	Automatic stop and reverse on 3kg impact resistance
Height memory presets	4 programmable saved height positions per control unit
Independent adjustment per workstation	Each 1600mm desk unit adjusts height separately, allowing sit/stand customization per user
Adjustable floor levelling	15mm vertical adjustment per foot to compensate for uneven carpet or hard flooring
Integrated cable management	Under-desk cable tray channel routed along horizontal support beam
Continuous benching configuration	Units can be linked side-by-side to create extended multi-user work rows without leg overlap
Overheat protection	2 minute continuous operation lockout after 1 minute of active lifting to protect motors
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Number of shipping cartons	4
Individual worktop carton dimensions	1650 x 850 x 80 mm
Individual frame carton dimensions	1000 x 300 x 200 mm
Total gross shipping weight	165 kg
Total shipping volume	0.38 CBM
Required assembly time	60 minutes
20ft GP container loading quantity	52 units
40ft HQ container loading quantity	128 units
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Open plan office workstations	Ideal for 2-person back-to-back or side-by-side team benching layouts, supporting mixed seated and standing work styles
Co-working flexible spaces	Suitable for flexible hot-desking environments where users require personalized height adjustment
Project team work areas	Supports extended work sessions with equipment spread across 800mm deep work surfaces, with space for monitors, keyboards and documents
Administrative and back office zones	Provides durable commercial-grade work surfaces for daily administrative tasks, with stable frame support for office equipment
Home office dual-user setups	Fits dedicated home work rooms for two simultaneous users, with independent height control for personalized ergonomics
Training room flexible layouts	Can be repositioned and linked into extended rows for training, workshop or collaborative event configurations

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 527-1:2011	Applies to dimensional and safety requirements for office work desks and workstations
EN 527-2:2002	Applies to mechanical stability and structural strength requirements for office desks
EN 1335-2:2009	Referenced for ergonomic clearance dimensions around seated work positions

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.5-2021	Applies to desk product safety, structural performance and durability testing for office desks
ANSI/BIFMA G1-2013	Applies to ergonomic guideline requirements for adjustable height work surfaces

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3326-2016	Applies to desk dimensional tolerance and stability requirements for office work surfaces
GB/T 3327-2016	Applies to mechanical performance requirements for office desks including static load and durability testing
GB 18580-2017	Applies to formaldehyde emission limits for wood-based panel materials, E1 grade maximum 0.124mg/m³
GB/T 24821-2009	Applies to performance requirements for electric height-adjustable office desks including lifting mechanism safety

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3326-2016：Applies to desk dimensional tolerance and stability requirements for office work surfaces；
2. GB/T 3327-2016：Applies to mechanical performance requirements for office desks including static load and durability testing；
3. GB 18580-2017：Applies to formaldehyde emission limits for wood-based panel materials, E1 grade maximum 0.124mg/m³；
4. GB/T 24821-2009：Applies to performance requirements for electric height-adjustable office desks including lifting mechanism safety；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · SITSTAND-BENCH-1600-LG

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · SITSTAND-BENCH-1600-LG

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · SITSTAND-BENCH-1600-LG打开导出工具

页面快速操作

发布采购询价

产品描述

The Two-Person Benching Height-Adjustable Office Desk is a streamlined commercial-grade work solution built to support ergonomic sit-stand work patterns for paired users, delivered as an unbranded model suited for flexible multi-user layouts. Its visual design features a continuous, flush bench layout with light grey matte high-pressure laminate work surfaces paired with a smooth white powder-coated steel frame, creating a neutral, professional aesthetic that complements a wide range of interior design schemes without visual clutter. Each workstation offers a 1600mm wide, 800mm deep work surface finished with 2mm matching light beige ABS edge trim, sized to accommodate monitors, input devices, reference documents, and personal work items without crowding adjacent users. Construction centers on durable, commercial-spec materials: worktops use a high-density particleboard core with a scratch-resistant HPL wear layer, supported by a welded cold-rolled steel frame with box-section lifting legs and a reinforced horizontal crossbeam. Black non-marking nylon levelling glides at each leg base adjust to compensate for uneven hard flooring or carpet, while the steel lifting mechanism uses internal lead screws with polymer bearing guides for smooth, consistent operation. Practical functionality is tailored to shared workspace needs: each workstation operates on an independent dual-motor lift system with height adjustment spanning seated to standing positions, supported by anti-collision protection that stops and reverses movement on impact, four programmable height memory presets per control unit, and overheat protection to extend motor service life. An integrated under-desk cable tray routes power and data cords along the support beam to reduce surface clutter, and units can be linked side-by-side to create extended, leg-aligned work rows without gaps between adjacent surfaces. Each station supports evenly distributed static loads for typical office equipment and user weight, with a rated lift mechanism duty cycle aligned to standard commercial office use. This desk fits a wide range of spaces, including open-plan office benching layouts, co-working hot-desking zones, project team work areas, administrative back-office zones, dual-user home office setups, and flexible training rooms that require reconfigurable extended work rows. For procurement teams, key considerations include recommended warranty terms aligned to commercial category standards: five years for structural components, three years for hardware, and two years for surface finishes. The product ships flat-packed across multiple cartons with protective foam for components, requires assembly by two people with standard hand tools, and features threaded main connectors designed to support multiple controlled reassembly cycles for spaces that require regular layout reconfiguration.

Two-Person Benching Height-Adjustable Office Desk Specifications

供应商与现货