纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1200 × 500 × 750 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight	24 kg
Recommended distributed top load	60 kg
Concentrated static load at center	30 kg over 200 x 200 mm
Modesty panel lateral load	15 kg
Caster individual rated load	40 kg
Flip-top mechanism cycle life	10000 cycles
Caster travel durability	20 km over smooth indoor floors
Brake holding force	20 kg horizontal push
Reference Static Load	150 kg depending on category
Moving-part Durability Reference	Acceptance target 50000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Worktop substrate	25 mm particleboard core, walnut wood-grain melamine or HPL face, sealed all edges.
Worktop edge	2 mm impact-resistant PVC edge band in matching walnut tone, machine-glued and radius-trimmed.
Modesty panel	18 mm particleboard panel with matching walnut laminate on exposed face and sealed back.
Folding legs	40 x 40 x 1.5 mm white powder-coated rectangular steel legs with welded foot sockets.
Upper frame rails	30 x 30 x 1.5 mm powder-coated steel rectangular tubes connecting both leg frames.
Utility tray	0.8 mm perforated steel sheet with gray powder-coated finish and round ventilation holes.
Flip hinges	2 mm formed steel hinge plates with zinc-plated pivot pins and polymer wear bushings.
Latch and release lever	Black injection-molded PP lever acting on a steel spring-loaded side latch.
Caster wheels	Four 50 mm nylon twin-wheel swivel casters with gray TPU tread and black hubs.
Caster brakes	Two front casters with black PP total-lock pedals locking wheel and swivel.
Fasteners	Zinc-plated steel M8 bolts, lock washers, and threaded welded inserts.
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Flip-top operation	Side lever releases the spring latch and rotates the 1200 mm top from 0 degree use position to 90 degree vertical nesting position.
Folding lock positions	Dual positive locks engage at 0 degree horizontal use and 90 degree folded storage positions.
Mobile repositioning	Four 360 degree swivel twin casters allow one-person movement; 2 braked casters lock the table in meeting layouts.
Nesting storage	Folded units align in rows at 190 mm depth per table, reducing storage footprint when not in use.
Modesty screening	1040 x 340 mm panel screens seated users from the opposite side while retaining 600 mm lower leg clearance.
Perforated utility storage	900 x 130 mm steel tray holds notebooks, power adapters, or loose cables under the top.
Surface reconfiguration	Tables join side by side to form 1200 mm module rows for training, exams, or conference layouts.
Floor protection	Soft gray TPU caster tread rolls on vinyl, wood, tile, and low-pile carpet without exposed metal contact.
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

该模块暂无数据。

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

该市场暂无标准数据。

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.5

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

该市场暂无标准数据。

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. 技术标准与检测报告由供应商在投标或采购确认阶段提供；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · FTT-1200500-WHT-C

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · FTT-1200500-WHT-C

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · FTT-1200500-WHT-C打开导出工具

页面快速操作

发布采购询价

产品描述

The Mobile Flip-Top Training Table with Walnut Laminate Top combines a warm walnut-grain work surface with a clean white steel frame, giving commercial learning and meeting spaces a practical yet understated appearance. Its 1200 mm rectangular top sits at standard table height and is paired with a matching modesty panel that screens seated users from the opposite side while preserving open lower space for legs. When not in use, a side lever releases the spring latch and rotates the top from horizontal use position to a vertical nesting position. Folded tables align in compact rows, supporting orderly storage and faster room turnover. The table remains visually light, with rectangular steel legs, upper frame rails, a perforated utility tray, and mobile twin-wheel casters. Its balanced layout suits rows, grouped training configurations, exam settings, or conference arrangements, and individual tables can be joined side by side to create continuous module layouts. Construction centers on a 25 mm particleboard worktop core with a walnut wood-grain melamine or HPL face and sealed edges. The exposed perimeter uses 2 mm impact-resistant PVC edge banding in a matching walnut tone, machine-glued and radius-trimmed for a neat finish. The modesty panel uses an 18 mm particleboard base with matching walnut laminate on the exposed face and a sealed back. The folding structure is built from 40 x 40 mm white powder-coated rectangular steel legs with welded foot sockets, connected by 30 x 30 mm powder-coated upper rails. Formed steel hinge plates, zinc-plated pivot pins, polymer wear bushings, and a steel spring-loaded side latch operated by a black PP release lever support the flip action, while positive locks hold the table in horizontal use and vertical folded positions. Mobility is provided by four 50 mm nylon twin-wheel swivel casters with gray TPU treads and black hubs, allowing one-person repositioning on smooth indoor floors. Two casters include brakes to secure layouts during meetings or instruction. Beneath the top, a gray powder-coated perforated steel utility tray with round ventilation holes offers storage for notebooks, power adapters, or loose cables. The recommended distributed top load is 60 kg, with a 30 kg concentrated static load rating at the center over a 200 x 200 mm area; the modesty panel has a lateral load rating of 15 kg, and each caster is rated for 40 kg. The flip mechanism is rated for 10000 cycles, and caster travel durability is rated for 20 km on smooth indoor floors. This unbranded model FTT-1200500-WHT-C is suited to training rooms, educational facilities, community spaces, flexible offices, conference areas, and residential multiuse rooms that require occasional reconfiguration. Procurement planning should account for the table’s 24 kg net weight, delivery as one set in two cartons, packaged gross weight of 120 kg per set, packaging volume of 0.8 cubic meters per set, and a reference assembly time of 40 minutes per set. Buyers should also confirm storage aisle width, floor surface compatibility, delivery access, and the number of braked and nesting positions needed for the intended layout.

Mobile Flip-Top Training Table with Walnut Laminate Top Specifications

供应商与现货