纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2100 × 850 × 880 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Seat static load capacity (per seat)	150 kg
Cushion foam density	45 kg/m³
Foam rebound rate	60%
Set total net weight	280 kg
Leather abrasion resistance	50000 cycles
Wood frame static load rating	600 kg
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles
Five-star Base Static Load Reference	Acceptance target ≥120 kg; chair reference load 150 kg

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat and back upholstery	Top-grain cowhide leather, 1.2mm thickness
Seat cushion core	High-density polyurethane foam, wrapped in soft down layer
Back cushion core	Medium-density polyurethane foam, 80mm thickness
Structural frame	Solid oak hardwood, kiln-dried to 10% moisture content
Armrest trim	Polished solid walnut-stained wood, clear matte lacquer finish
Table tops	Solid wood veneer over MDF core, scratch-resistant matte topcoat
Support feet	Solid hardwood, non-slip rubber foot pads
Internal frame bracing	1.2mm thick steel corner brackets for reinforced joints
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Fixed ergonomic back angle	105 degrees
Integrated wood armrest support	Full-length arm framing for stable arm resting and structural bracing
Fixed non-reclining seat structure	Stable fixed cushioning for formal reception seating applications
Floor protection design	Rubber foot pads prevent scuffing on hard stone or tile flooring
Removable seat cushion covers	Zippered covers allow professional cleaning for long-term maintenance
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office reception areas	Formal, professional appearance for hosting visiting clients and guests
High-end hotel lobby lounge zones	Durable leather and wood construction for high daily guest traffic
Corporate boardroom waiting areas	Coordinated set provides cohesive, premium aesthetic for visitor seating
Private study lounge spaces	Comfortable seating paired with tables for reading and casual work
Premium VIP lounge facilities	Elegant two-tone design fits upscale service space decor requirements
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Furniture stability testing	EN 1022:2018
Upholstered furniture flammability	EN 1021:2014
Office furniture strength testing	EN 15373:2007

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

Lounge seating durability	ANSI/BIFMA X2020
Occasional table stability	ANSI/BIFMA X2021

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Leather upholstery testing	GB/T 16799
Wood furniture safety	GB 28007
Upholstered furniture durability	GB/T 3324
Formaldehyde emission limit	GB 18584

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Leather upholstery testing：GB/T 16799；
2. Wood furniture safety：GB 28007；
3. Upholstered furniture durability：GB/T 3324；
4. Formaldehyde emission limit：GB 18584；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · RCP-LTHR-003

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · RCP-LTHR-003

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · RCP-LTHR-003打开导出工具

页面快速操作

发布采购询价

产品描述

This 3-Piece Wood-Framed Leather Office Reception Seating Set with Coffee Tables, model RCP-LTHR-003, delivers a modern executive aesthetic suited to formal lounge configurations. Its coordinated layout pairs structured seating units with matching solid wood accent tables, creating a cohesive, polished visual presence defined by warm wood tones and smooth leather upholstery. Full-length armrest trim finished in polished, walnut-stained solid wood with a clear matte lacquer complements the solid oak hardwood frame, lending a refined two-tone elegance that aligns with premium interior design schemes. Construction prioritizes long-term durability and consistent support. The structural frame uses kiln-dried solid oak, reinforced with thick steel corner brackets at joints for added stability, with support feet fitted with non-slip rubber pads. Seating surfaces are upholstered in top-grain cowhide leather, with seat cushions cored in high-density polyurethane foam wrapped in a soft down layer, and back cushions in medium-density polyurethane foam. A bent plywood support board sits beneath seat cushions, while table tops feature solid wood veneer over an MDF core, finished with a scratch-resistant matte topcoat. Each seat supports a static load of 150 kg, with leather tested to withstand heavy abrasion from regular daily use. Practical design features support comfortable, low-maintenance use. The fixed non-reclining seat structure holds an ergonomic 105-degree back angle, with a dedicated lumbar support zone for extended seated comfort. Integrated full-length wood armrests provide stable support for users while doubling as structural bracing. Rubber foot pads prevent scuffing on hard stone or tile flooring, and zippered removable seat cushion covers allow professional cleaning to extend the set’s service life. The included matching accent tables provide convenient surface space for placing refreshments, reading materials, or personal items. This set is well suited for a range of commercial and residential spaces, including executive office reception areas for hosting clients, high-end hotel lobby lounge zones, corporate boardroom waiting areas, private study lounge spaces, and premium VIP lounge facilities. When procuring the set, note that units ship across two cartons, with a recommended assembly time of 40 minutes per set. Design teams may coordinate the seating with a 2.4 m executive desk for fully integrated private office layouts, and should account for the cohesive formal aesthetic when aligning selections with existing upscale decor palettes.

3-Piece Wood-Framed Leather Office Reception Seating Set with Coffee Tables Specifications

供应商与现货