纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2200 × 860 × 900 mm
Standard seat height from floor	450 mm
Seat cushion depth per seating position	580 mm
Backrest height above seat surface	450 mm
Armrest height above seat surface	180 mm
Total set footprint (minimum arrangement)	3600 x 2800 mm
Wood base/trim section thickness	60 mm
Clearance between sofa base and floor	30 mm
Seat Cushion Thickness	180 mm
Back Cushion Thickness	160 mm
Leg Height / Floor Clearance	160 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total set gross weight (packed)	280 kg
Per-seat static load rating	150 kg
Cushion foam density	60 kg/m³
Cushion foam rebound rate	60%
Seat cushion total thickness	120 mm
Backrest foam thickness	80 mm
Recommended maximum simultaneous users	5 people
Product warranty period	5 years
Upholstery abrasion resistance (Martindale)	50000 cycles
Seat Foam Density / Rebound	40 kg/m³ / 60%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat and back upholstery	1.2 mm thick black PU faux leather, stain and scratch resistant
Internal load-bearing frame	40 mm thick kiln-dried solid hardwood, mortise and screw reinforced
Seat cushion fill	Three-layer high-density polyurethane foam, surface soft layer + support core
Backrest fill	40 mm thick medium-density foam over hardwood back panel
Armrest construction	Curved padded upholstered top with solid reddish-brown wood side trim
Lower base and plinth	Solid reddish-brown stained and lacquered hardwood, floor protection glides
Coffee table structure	Solid reddish-brown wood frame with polished wood tabletop, lower storage shelf
Frame moisture content	12%
Seam stitch pitch	30 mm
Timber Frame Section / Moisture	Primary section ≥30 × 50 mm; recommended moisture 12%
Spring / Webbing Specification	Sinuous spring wire 4 mm; elastic webbing 70 mm wide
Leg Connector Specification	Reference M8-M10 with at least 1 mechanical fixing per leg

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating configuration	Fixed stationary 3-seat sofa + 2 single armchairs for formal symmetrical guest reception
Surface maintenance	Smooth non-porous upholstery allows wipe-clean sanitization between visitor uses
Structural stability	Wide solid wood plinth base eliminates tipping risk during regular guest use
Weight distribution design	Evenly spaced hardwood support slats under cushions prevent long-term foam sag
Floor protection	Non-marking plastic glides fitted to base feet prevent scratching hard floor surfaces
Arrangement flexibility	Modular individual units allow reconfiguration for different meeting room or VIP lounge layouts
Back support design	Tall contoured fixed backrest maintains upright formal posture for business meetings
Cushion Service Configuration	Recommended 2removable/replaceable cushion methods

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Module Carton Dimensions	2200× 1050× 850 mm
Reference Packaging Volume	1.8 m³/item
Reference Packaged Gross Weight	110 kg/item

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Executive office reception areas	Formal symmetrical layout creates professional first impression for visiting clients
VIP meeting and waiting lounges	High-back supportive seating provides comfortable extended waiting for official guests
Government and corporate conference anterooms	Conservative black and red wood finish matches formal official space design requirements
Corporate boardroom auxiliary seating	Units can be arranged for small group breakout discussions outside main meeting tables
Hotel business center guest areas	Stain-resistant easy-clean upholstery reduces maintenance for high-traffic public use
Recommended configuration addition	Pair with matching solid wood side tables and table lamps to complete the formal reception zone

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-2:2018	Office furniture safety requirements for non-adjustable seating used in public areas
EN 1022:2018	Domestic and contract furniture seating stability test method reference

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.4-2021	Safety and performance standard for lounge and public area seating
ANSI/BIFMA X6.1-2021	Standard for occasional tables applicable to matching reception coffee table

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to solid wood frame and base components
GB/T 16799-2008	Specification for polyurethane synthetic leather used in furniture upholstery
GB 18584-2001	Indoor decoration material limit of harmful substances for wooden furniture
GB/T 19001-2016	Quality management system requirement applicable to commercial furniture manufacturing

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to solid wood frame and base components；
2. GB/T 16799-2008：Specification for polyurethane synthetic leather used in furniture upholstery；
3. GB 18584-2001：Indoor decoration material limit of harmful substances for wooden furniture；
4. GB/T 19001-2016：Quality management system requirement applicable to commercial furniture manufacturing；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · OF-RCP-311-RWBL-001

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · OF-RCP-311-RWBL-001

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · OF-RCP-311-RWBL-001打开导出工具

页面快速操作

发布采购询价

产品描述

This New Chinese Style office reception sofa set brings a polished, formal aesthetic to professional spaces, pairing structured seating with a coordinated solid wood coffee table for cohesive guest environments. Its visual profile balances sleek black upholstery with warm reddish-brown wood trim, with a core 3+1+1 layout of one three-seat sofa and two single-seat armchairs that supports symmetrical, dignified arrangements ideal for greeting visitors. Individual standalone units allow flexible reconfiguration to suit varying space needs, while maintaining a consistent, refined design language across every piece. Construction prioritizes durable, long-wearing performance for regular commercial use. Seating surfaces are wrapped in 1.2mm black PU faux leather, treated to resist stains and scratches, with padded, curved armrests trimmed in the same rich reddish-brown hardwood used for the frame, base, and matching coffee table. Internal load-bearing structures use kiln-dried solid hardwood reinforced with mortise joints and screws, set to a stable moisture content for lasting structural integrity. Seat cushions use a three-layer high-density polyurethane foam construction, supported by evenly spaced hardwood slats to prevent long-term sag, while backrests use medium-density foam over solid wood panels to deliver upright, contouring support. The wide, solid wood plinth base is fitted with non-marking plastic glides to protect hard flooring surfaces, and eliminates tipping risk during regular guest use. The matching solid wood coffee table features a polished tabletop and lower storage shelf for functional convenience. Practically, the set supports up to five simultaneous users, with a per-seat static load rating suited for regular guest traffic. The smooth, non-porous upholstery allows quick wipe-clean sanitization between uses, streamlining maintenance for high-footfall areas. The 450mm standard seat height, appropriately deep seat cushions, and tall contoured backrests support upright, formal posture suitable for business interactions. This set is well suited for executive office reception areas, VIP meeting and waiting lounges, government and corporate conference anterooms, auxiliary boardroom seating for small breakout discussions, and hotel business center guest zones. Its restrained black and warm wood finish aligns with conservative formal space design requirements. For procurement planning, note the set ships in two cartons, with a referenced assembly time of 40 minutes per set, and a minimum required footprint for standard symmetrical arrangement. Buyers may also source matching solid wood side tables and table lamps to complete a fully coordinated reception zone. The product is unbranded, with fixed stationary seating construction designed for permanent, long-term installation in professional settings.

3+1+1 New Chinese Style Black Leather Office Reception Sofa Set with Matching Coffee Table Specifications

供应商与现货