商品供应商Contemporary Three-Seater Sofa with Off-White Fabric Upholstery and Saddle Brown Wrapped Armrests，Kiln-dried solid hardwood with glued corner blocks
可联系供应商获取生产周期与报价。
PRODUCT MODULE 01 / 06
基础物理尺寸
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源：工厂资料结构化字段，最终以实测值为准
| 产品外部尺寸（宽 × 深 × 高） | 2490 × 1020 × 920 mm | |
|---|---|---|
| Seat height from floor | 510 mm | |
| Individual seat cushion width | 670 mm | |
| Seat depth (front to back) | 640 mm | |
| Back cushion total height | 480 mm | |
| Armrest height above seat | 160 mm | |
| Under-sofa floor clearance | 150 mm | |
| Armrest width at outer edge | 100 mm | |
| Throw pillow dimensions (large back) | 650 x 650 mm | |
| Throw pillow dimensions (small front) | 500 x 500 mm | |
| Seat cushion thickness | 190 mm | |
| Armrest wrap panel thickness | 12 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
PRODUCT MODULE 02 / 06
重量、承重与性能参数
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源：产品性能数据，采购前请核对具体测试口径
| Total static weight capacity | 408 kg | |
|---|---|---|
| Per-seat static weight capacity | 136 kg | |
| Seat foam density | 45 kg/m³ | |
| Seat foam rebound rate | 60% | |
| Back cushion fill density (feather-fiber blend) | 30 kg/m³ | |
| Upholstery fabric abrasion resistance | 45000 Martindale cycles | |
| Seam stitch pitch | 3 stitches per cm | |
| Sinuous spring wire gauge | 8 gauge | |
| Product net weight | 76 kg | |
| Frame warranty period | 10 years |
PRODUCT MODULE 03 / 06
材质与结构参数
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源：以工厂材质清单与验货报告为准
| Internal load-bearing frame | Kiln-dried solid hardwood with glued corner blocks | |
|---|---|---|
| Seat suspension system | 8-gauge sinuous steel springs spaced 100mm apart | |
| Main body upholstery | Off-white textured woven polyester-linen blend fabric | |
| Armrest construction | Rigid curved panel wrapped in saddle brown top-grain leather | |
| Seat cushion fill | High-resilience polyurethane foam wrapped in dacron fiber | |
| Back and throw cushion fill | Down-feather and polyester fiber blend for soft sink-in feel | |
| Support legs | Polished chrome-plated solid steel V-shaped cantilever legs | |
| Cushion edge detail | Thin saddle brown contrast piping along all cushion seams | |
| Under-seat base panel | Reinforced engineered wood support board covered in brown edge trim | |
| Fastener hardware | Zinc-plated steel bolts and brackets for leg assembly | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide |
PRODUCT MODULE 04 / 06
功能与调节参数
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源：功能配置参数，以供应商正式规格为准
| Cushion configuration | Three independent divided seat cushions with layered loose back cushions | |
|---|---|---|
| Cushion cover design | Zippered removable cushion covers for spot cleaning or reupholstery | |
| Seat support performance | Sinuous spring suspension provides even weight distribution across full seat width | |
| Leg assembly | Tooled bolt-on attachment of V-shaped metal legs for knockdown shipping | |
| Armrest function | Curved wrapped armrests provide padded lateral support at seated elbow height | |
| Floor protection | Recessed floor glides on each leg base to prevent hard floor scratching | |
| Seating capacity | Accommodates 3 average-sized adults with individual seat alignment | |
| Cushion reversibility | Seat cushions are double-sided and reversible for even wear over time | |
| Under-base clearance | Open clearance under seat allows robot vacuum access and air circulation | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
PRODUCT MODULE 05 / 06
包装与物流参数
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源：外贸报价与装柜测算参考
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
PRODUCT MODULE 06 / 06
应用场景与使用方式
推荐空间 / 目标用户 / 使用方式
数据来源：依据产品结构与品类整理的推荐应用场景
| Residential living room primary seating | Sized for 3-person use in open-plan or dedicated living spaces | |
|---|---|---|
| Modern office reception lounge | Sleek minimalist design fits contemporary corporate waiting areas | |
| High-end residential lounge or den | Mixed fabric-leather finish complements luxury neutral interior palettes | |
| Hotel suite guest seating area | Low-profile elegant form aligns with boutique hotel furnishing standards | |
| Open coworking space break area | Durable upholstery and plush cushions support extended casual seating | |
| Pairing recommendation | Works with matching low-profile coffee tables 450 mm in height for proportional balance | |
| Floor surface compatibility | Suitable for hard wood, tile, and low-pile carpeted floors with included glides |
STANDARD S1
欧盟市场准入要求 * EN 标准
欧洲市场准入与化学品要求
| EN 12520:2015 | Domestic furniture seating strength, durability and safety requirements | |
|---|---|---|
| EN 1022:2018 | Domestic furniture seating stability test standard |
STANDARD S3
适用于中国市场项目的标准 * GB 标准
适用于中国市场项目的标准
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to internal frame construction | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances in wooden furniture, required for indoor residential use | |
| GB/T 1952.1-2012 | Test methods for sofas, applicable to seating durability and strength verification |
招标文件标准化描述文本
本产品须满足以下技术参数要求： 1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to internal frame construction； 2. GB 18584-2001：Limit of harmful substances in wooden furniture, required for indoor residential use； 3. GB/T 1952.1-2012：Test methods for sofas, applicable to seating durability and strength verification； 最终交付参数、检测报告和验收标准以双方采购合同为准。
GENERATED EXPORTS
一键导出完整商品资料
以下文件均根据当前已发布商品参数实时生成。
完整参数报告 PDF
直接下载英文参数报告，可选择公制或英制单位。
完整参数 Excel
导出全部商品信息与参数模块，文件内容统一使用英文。
外贸 Listing 模板
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
海关申报数据
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具