纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2820 × 920 × 800 mm
seat height	450 mm
leg height	150 mm
seat depth	650 mm
seat cushion thickness	180 mm
back cushion height	450 mm
bolster arm diameter	150 mm
under-seat clearance	120 mm
single seat width	630 mm
bolster arm length	220 mm
seat platform frame thickness	30 mm
metal leg tube diameter	20 mm
Back Cushion Thickness	160 mm
Leg Height / Floor Clearance	160 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

per-seat static load capacity	150 kg
net product weight	85 kg
cushion foam density	45 kg/m³
foam rebound rate	55%
upholstery abrasion resistance	40000 Martindale rubs
seam stitch pitch	30 mm per 10 cm
metal frame static load rating	700 kg
frame structural warranty	10 years
Seat Foam Density / Rebound	40 kg/m³ / 60%
Upholstery Abrasion Reference	Fabric 60000 cycles; leather-class cover 1.4 mm

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

upholstery material	1.4mm thick full-aniline tan top-grain leather
internal load-bearing frame	30mm thick kiln-dried solid pine and plywood composite
seat cushion fill	High-density polyurethane foam wrapped with 200g polyester fiber
back cushion fill	Blend of down alternative fiber and shredded foam for loose plush support
bolster arm fill	High-density foam core wrapped in matching tan leather upholstery
support frame and legs	20mm diameter black powder-coated carbon steel tubing
seat suspension system	4mm gauge sinuous serpentine springs spaced 100mm apart
lower seat platform	12mm thick plywood substrate covered in matching leather upholstery
leg foot caps	Non-marking 5mm thick rubber pads
stitching thread	High-tenacity polyester bonded thread
Timber Frame Section / Moisture	Primary section ≥30 × 50 mm; recommended moisture 12%
Spring / Webbing Specification	Sinuous spring wire 4 mm; elastic webbing 70 mm wide

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

seating configuration	Fixed linear four-position seating with no recline or modular adjustment
cushion design	Two split continuous seat cushions, four loose upright back cushions, one angled throw cushion
armrest function	Cylindrical bolster armrests at both ends provide padded lateral arm support
leg assembly	Legs attach via pre-installed M8 threaded inserts for tool-enabled knock-down assembly
floor protection	Rubber foot caps on each leg prevent hard floor scratching and reduce sliding
cushion reversibility	Seat cushions are fully reversible to extend upholstery wear life
under-seat clearance	120mm open clearance allows robot vacuum access below the sofa platform
back cushion adjustability	Loose back cushions can be repositioned or fluffed to customize lumbar support
Cushion Service Configuration	Recommended 2removable/replaceable cushion methods

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Module Carton Dimensions	2200× 1050× 850 mm
Reference Packaging Volume	1.8 m³/item
Reference Packaged Gross Weight	110 kg/item

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

residential living room	Suitable for open-plan living areas as primary guest and family seating for 4 users
office reception lounge	Appropriate for modern corporate reception and breakout waiting areas
residential lounge media room	Low-profile open base design supports unobstructed sightlines for media viewing
boutique hotel lobby seating	Durable leather upholstery suitable for high-traffic hospitality common areas
apartment open-plan dining-living space	Slim linear profile fits compact urban apartment floor plans without visual bulk
matching configuration recommendation	Pairs with low-profile rectangular tan leather ottomans and metal-frame side tables

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12520:2015	Applicable to domestic furniture seating strength, durability and stability requirements
EN 1021-1:2014	Applicable to upholstered furniture ignition resistance to smoldering cigarettes
EN 13759:2012	Applicable to durability testing of seating foam padding components

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	Applicable to general technical requirements for wooden furniture frames used in upholstered sofas
GB/T 1952.1-2012	Applicable to upholstered sofa safety, dimensional tolerance and durability testing
GB 18584-2001	Applicable to formaldehyde emission limits for wooden furniture components
GB/T 22807-2019	Applicable to leather furniture upholstery material performance testing

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：Applicable to general technical requirements for wooden furniture frames used in upholstered sofas；
2. GB/T 1952.1-2012：Applicable to upholstered sofa safety, dimensional tolerance and durability testing；
3. GB 18584-2001：Applicable to formaldehyde emission limits for wooden furniture components；
4. GB/T 22807-2019：Applicable to leather furniture upholstery material performance testing；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · SOF-4SEAT-TAN-MTL-001

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · SOF-4SEAT-TAN-MTL-001

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · SOF-4SEAT-TAN-MTL-001打开导出工具

页面快速操作

发布采购询价

产品描述

This contemporary four-seat upholstered sofa presents a sleek, minimalist silhouette defined by cylindrical bolster arms, clean linear proportions, and a slim low-profile black metal frame that balances soft upholstered texture with refined industrial detailing. Its open, streamlined layout avoids visual bulk, keeping sightlines clear across interior spaces, while the warm tan leather upholstery creates a neutral, inviting focal point that coordinates seamlessly with complementary low-profile tan leather ottomans and metal-frame side tables. The sofa is built for long-term durability and everyday use, with an internal load-bearing frame constructed from kiln-dried solid pine and plywood composite, supported by 20mm diameter black powder-coated carbon steel tubing for the outer frame and legs. Seating surfaces are upholstered in 1.4mm thick full-aniline tan top-grain leather, rated to withstand 40000 Martindale rubs for high-traffic use. Seat cushions use high-density polyurethane foam wrapped in soft polyester fiber, supported by sinuous serpentine springs, while back cushions hold a plush blend of down-alternative fiber and shredded foam; cylindrical bolster arms contain a high-density foam core wrapped in matching leather. All legs are fitted with non-marking rubber pads to protect hard flooring and reduce unwanted movement. Fixed linear four-position seating offers stable, consistent support without recline or modular adjustment, with two split continuous seat cushions that are fully reversible to extend upholstery lifespan, four loose upright back cushions, and one angled throw cushion for added comfort. The 120mm open under-seat clearance allows robot vacuum access for easy cleaning, and tool-enabled knock-down assembly via pre-installed threaded inserts cuts setup time to 40 minutes per set, with the product shipped across two cartons. This sofa fits a wide range of spaces, including open-plan residential living rooms, home media rooms, compact urban apartment dining-living zones, modern corporate reception and breakout lounges, and high-traffic boutique hotel lobbies. Procurement teams should note the 85kg net weight, 700kg total frame static load rating, and 150kg per-seat static capacity to confirm alignment with space use requirements, and plan for appropriate delivery handling given the 110kg packaged gross weight across two shipping cartons.

Contemporary Tan Upholstered Four-Seat Sofa with Cylindrical Bolster Arms and Slim Black Metal Frame Specifications

供应商与现货