纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2203 × 991 × 890 mm
Seat height from floor	480 mm
Seat depth (usable)	610 mm
Arm height from floor	650 mm
Support leg height	150 mm
Seat cushion thickness	200 mm
Backrest cushion thickness	180 mm
Individual seat cushion width	1060 mm
Throw pillow (large) dimensions	700 x 500 mm
Throw pillow (small) dimensions	600 x 300 mm
Back Cushion Thickness	160 mm
Leg Height / Floor Clearance	160 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total static weight capacity	272 kg
Seat foam density	34 kg/m³
Seat foam rebound rate	45%
Net product weight	37 kg
Recommended occupancy	2 adults
Seam stitch pitch	30 mm
Frame static load duration	72 hours without permanent deformation
Seat Foam Density / Rebound	40 kg/m³ / 60%
Upholstery Abrasion Reference	Fabric 60000 cycles; leather-class cover 1.4 mm
Per-seat Load Reference	130 kg/seat

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Upholstery fabric	Linen-polyester blended woven fabric, 320 gsm
Seat cushion fill	High-density polyurethane foam, wrapped with soft dacron layer
Back cushion fill	Blown polyester fiber fill for soft plush support
Inner structural frame	18 mm thick plywood frame, glued and screwed joints
Support legs	2 mm thick black powder-coated steel, outward angled design
Armrest padding	20 mm thick foam core wrapped in same upholstery fabric
Bottom dust cover	Black non-woven polypropylene fabric, stapled to frame underside
Leg foot pads	Non-slip rubber floor protection pads, fitted to each leg base
Timber Frame Section / Moisture	Primary section ≥30 × 50 mm; recommended moisture 12%
Spring / Webbing Specification	Sinuous spring wire 4 mm; elastic webbing 70 mm wide
Leg Connector Specification	Reference M8-M10 with at least 1 mechanical fixing per leg
Reference Upholstery Color Count	Recommended 8fabric/leather color options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Cushion configuration	Two divided removable seat cushions, two fixed back cushions
Included accessories	Two matching large square throw pillows, one small lumbar throw pillow
Assembly requirement	Legs attach to pre-installed frame base with included hardware
Floor protection	Rubber foot pads prevent floor scratching and sliding on hard surfaces
Cushion reversibility	Seat cushions are reversible to extend fabric service life
Seating support	80 mm wide sinuous wire springs support seat cushions for even weight distribution
Cushion Service Configuration	Recommended 2removable/replaceable cushion methods

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Module Carton Dimensions	2200× 1050× 850 mm
Reference Packaging Volume	1.8 m³/item
Reference Packaged Gross Weight	110 kg/item

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential living room	Primary seating for small to medium apartment living spaces
Home office lounge	Casual seating for reception or break areas in home workspaces
Bedroom sitting area	End-of-bed or corner seating for master or guest bedrooms
Small reception space	Guest seating for boutique studio or small office waiting areas
Recommended pairing	Pair with low-profile rectangular coffee tables 500 mm tall

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Upholstered furniture safety	EN 1022:2018 Domestic furniture - Seating - Determination of stability
Furniture flammability	EN 1021:2014 Upholstered furniture ignitability smouldering cigarette

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Upholstered furniture safety standard	GB/T 3324General technical requirements for wooden furniture
Furniture fabric performance	GB/T 21655.1Textile moisture absorption and quick-drying evaluation
Furniture foam performance	GB/T 10802Polyurethane foam for furniture
Furniture mechanical durability	GB/T 2012Upholstered sofas mechanical performance test

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Upholstered furniture safety standard：GB/T 3324General technical requirements for wooden furniture；
2. Furniture fabric performance：GB/T 21655.1Textile moisture absorption and quick-drying evaluation；
3. Furniture foam performance：GB/T 10802Polyurethane foam for furniture；
4. Furniture mechanical durability：GB/T 2012Upholstered sofas mechanical performance test；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · LS-2ST-TPE-MTL01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · LS-2ST-TPE-MTL01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · LS-2ST-TPE-MTL01打开导出工具

页面快速操作

发布采购询价

产品描述

This taupe linen-like upholstered two-seat sofa presents a clean, contemporary low-profile silhouette defined by its warm neutral upholstery and outward angled black metal legs. Its layout features two divided seat positions, padded armrests aligned to a consistent arm height, and balanced proportions tailored for compact seating arrangements, finished with matching throw accents that complement its understated design. The sofa is built on an 18mm thick plywood inner frame secured with glued and screwed joints, supported by 2mm thick black powder-coated steel legs fitted with non-slip rubber foot pads at each base. Its upholstery uses a 320 gsm linen-polyester blended woven fabric in a muted taupe tone. Seat cushions hold high-density 34 kg/m³ polyurethane foam wrapped in a soft dacron layer, supported by 80mm wide sinuous wire springs for even weight distribution, while fixed back cushions use blown polyester fiber for plush, soft support. Armrests feature a 20mm thick foam core wrapped in the same upholstery fabric, and a black non-woven polypropylene dust cover is stapled to the frame’s underside to enclose internal components. The design includes two removable, reversible seat cushions to extend fabric service life, with fixed back cushions for consistent structure. It ships with two matching large square throw pillows and one small lumbar throw pillow for added comfort and styling flexibility. The rubber foot pads prevent floor scratching and unwanted sliding on hard surface flooring. Legs attach to pre-installed frame mounts with included hardware, requiring straightforward assembly on site. This sofa serves as primary seating for small to medium residential living rooms, casual seating for home office reception or break areas, end-of-bed or corner seating for master and guest bedrooms, and guest seating for boutique studio or small office waiting areas. It pairs cohesively with low-profile rectangular coffee tables 500mm tall. For procurement, note that the unit ships across two cartons per set, with a packaged gross weight of 110kg and assembly time of 40 minutes per unit. It is rated to support a total static weight capacity of 272kg, with recommended occupancy of two adults. Replacement seat cushions are available to support long-term use, and the unbranded model LS-2ST-TPE-MTL01 offers a versatile, design-forward seating solution without premium branding markup. Total static load testing confirms the frame withstands 72 hours of applied load without permanent deformation, supporting reliable long-term use in both residential and light commercial settings.

Taupe Linen-Like Upholstered Two-Seat Sofa with Angled Black Metal Legs Specifications

供应商与现货