纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2440 × 860 × 790 mm
Seat height from floor	490 mm
Individual seat width	740 mm
Seat depth (front of seat to back cushion front)	700 mm
Back cushion height from seat surface	420 mm
Armrest height from floor	600 mm
Armrest width (outer frame to inner seat edge)	150 mm
Under-sofa floor clearance	200 mm
Seat cushion thickness	180 mm
Back cushion thickness	150 mm
Metal frame tube section thickness	30 mm
Leg Height / Floor Clearance	160 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total product net weight	75 kg
Per-seat static load capacity	136 kg
Seat cushion foam density	35 kg/cu.m
Back cushion fill density	20 kg/cu.m
Upholstery fabric abrasion resistance	55000 cycles
Fabric lightfastness rating	5
Seam stitch pitch	8 stitches per 30mm
Standard residential warranty	10 years
Seat Foam Density / Rebound	40 kg/m³ / 60%
Upholstery Abrasion Reference	Fabric 60000 cycles; leather-class cover 1.4 mm

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Structural base frame	Dark matte powder-coated square steel tube, sled configuration with central support legs
Seat support inner frame	Kiln-dried solid hardwood and engineered plywood substrate
Seat suspension system	8-gauge sinuous steel springs with polypropylene webbing cross support
Seat cushion core	35 kg/cu.m high-resilience cold-cure polyurethane foam with polyester fibre wrap
Back cushion core	Blown polyester fibre wrapped around 20 kg/cu.m polyurethane foam core
Armrest padding	30 kg/cu.m polyurethane foam wrapped in matching upholstery fabric
Upholstery cover	Taupe matte woven polyester-linen blend fabric with piped edge finishing
Frame foot glides	Injection-moulded nylon floor protection glides at all frame contact points
Cushion attachment	Non-slip fabric underlay to hold loose cushions in place without permanent fixing
Timber Frame Section / Moisture	Primary section ≥30 × 50 mm; recommended moisture 12%
Spring / Webbing Specification	Sinuous spring wire 4 mm; elastic webbing 70 mm wide
Leg Connector Specification	Reference M8-M10 with at least 1 mechanical fixing per leg

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating configuration	Fixed three-position straight seating with three divided seat and three loose back cushions
Cushion reversibility	Seat cushions are fully reversible to extend upholstery wear life
Back cushion adjustability	Loose back cushions can be repositioned for customized lumbar support
Cleaning access	Under-sofa open clearance allows robot vacuums and manual cleaning access
Floor protection	Nylon glides prevent scratching on hard flooring and reduce movement noise
Cover design	Tailored slipcover style fitting over frame and padding for clean modern lines
Structural support	Two additional central support legs prevent long-span frame sag under load
Seat comfort angle	Fixed 8-degree seat rake for relaxed upright lounge seating
Cushion Service Configuration	Recommended 2removable/replaceable cushion methods

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Module Carton Dimensions	2200× 1050× 850 mm
Reference Packaging Volume	1.8 m³/item
Reference Packaged Gross Weight	110 kg/item

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential living room main seating	Ideal for open-plan modern living spaces as primary three-person lounge seating
Studio apartment lounge area	Low-profile open frame suits compact urban living spaces without visual bulk
Office reception waiting area	Contemporary aesthetic fits modern workplace breakout and visitor spaces
Hotel suite lounge area	Durable neutral upholstery suits hospitality guest and public lounge zones
Recommended matching furniture	Pairs with low-profile metal coffee tables and minimalist side tables for coordinated look
Fabric suitability	Neutral taupe upholstery complements light wood, dark wood and monochrome interior palettes
Cleaning suitability	Open under-base clearance supports frequent cleaning in high-traffic domestic or commercial zones

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12520:2015	Applicable standard for domestic furniture seating strength, durability and stability
EN 1022:2018	Applicable standard for seating stability testing for residential upholstered furniture

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	Applicable standard for wooden furniture general technical requirements for inner frame components
GB 18584-2001	Applicable standard for formaldehyde emission limits for indoor wooden furniture components
GB/T 1952.1-2012	Applicable standard for upholstered sofa strength, durability and stability testing

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：Applicable standard for wooden furniture general technical requirements for inner frame components；
2. GB 18584-2001：Applicable standard for formaldehyde emission limits for indoor wooden furniture components；
3. GB/T 1952.1-2012：Applicable standard for upholstered sofa strength, durability and stability testing；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · TS-SLD-2400-TPE

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · TS-SLD-2400-TPE

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · TS-SLD-2400-TPE打开导出工具

页面快速操作

发布采购询价

产品描述

The Modern Minimalist Three-Seat Upholstered Sofa with Dark Metal Sled Base, model TS-SLD-2400-TPE, delivers a clean, streamlined contemporary aesthetic anchored by an open dark powder-coated steel sled frame with a central support structure, finished with injection-moulded nylon glides at all floor contact points. The tailored taupe woven polyester-linen blend slipcover follows crisp, unadorned lines accented with piped edges, holding three divided fixed seat positions and three loose back cushions, each with matching taupe fabric armrests padded to a balanced 600mm height from the floor. The overall form measures 2440 x 860 x 790 mm, with a 200mm open clearance beneath the frame that preserves visual lightness across varied interior settings. Beneath the upholstery, the sofa’s inner seat support frame is constructed from kiln-dried solid hardwood and engineered plywood, fitted with an 8-gauge sinuous steel spring suspension reinforced with polypropylene webbing cross supports. Seat cushions feature a 35 kg/cu.m high-resilience cold-cure polyurethane foam core wrapped in soft polyester fibre, while back cushions use a 20 kg/cu.m foam core surrounded by blown polyester fibre, and armrests are padded with 30 kg/cu.m polyurethane foam. The upholstery fabric delivers 55000 abrasion cycles and a lightfastness rating of 5, with seams stitched at 8 stitches per 30mm for consistent durability. Designed for flexible everyday use, the fully reversible seat cushions extend upholstery wear life, while loose back cushions can be repositioned to deliver customized lumbar support. The open under-sofa clearance accommodates robot vacuums and easy manual cleaning, nylon glides prevent hard floor scratches and reduce movement noise, and two additional central support legs prevent long-span frame sag under load, with a 136kg per-seat static load capacity. Non-slip underlay holds loose cushions securely without permanent fixing. This sofa suits open-plan residential living rooms as primary three-person seating, fits compact studio apartments without adding visual bulk, complements modern office reception and breakout areas, and works for hotel suite and public lounge zones, with its neutral taupe finish pairing seamlessly with light wood, dark wood, and monochrome palettes alongside low-profile metal coffee tables and minimalist side tables. For procurement, note the unbranded stationary sofa ships in 2 cartons with a total packaged gross weight of 110 kg and 1.8 m³ packaging volume, with a 40-minute per-set assembly time required.

Modern Minimalist Three-Seat Upholstered Sofa with Dark Metal Sled Base Specifications

供应商与现货