纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	3200 × 1150 × 900 mm
seat height	470 mm
seat depth	622 mm
seat cushion thickness	180 mm
backrest height above seat	430 mm
armrest width	280 mm
throw cushion dimensions	700 x 700 mm
base height above floor	0 mm
seat width per seating position	720 mm
Back Cushion Thickness	160 mm
Leg Height / Floor Clearance	160 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

net product weight	135 kg
total static weight capacity	350 kg
seat foam density	45D
seat foam rebound rate	60%
fabric abrasion resistance	50000 cycles
cushion compression recovery rate	95%
frame load test cycles	25000 cycles
seating capacity	4 adults
Seat Foam Density / Rebound	40 kg/m³ / 60%
Upholstery Abrasion Reference	Fabric 60000 cycles; leather-class cover 1.4 mm

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

upholstery fabric	280gsm matte dark grey sanded velvet fabric, soft hand feel
internal frame	30mm thick kiln-dried solid larch wood frame, moisture content 12%
seat support system	3.6mm diameter sinuous springs + 50mm wide elastic webbing grid
seat cushion fill	Three-layer structure: 45D high-resilience foam base, 30D soft foam middle, down/feather top layer
backrest fill	30D soft foam blended with down fill, wrapped in non-woven fabric liner
armrest fill	Same foam+down blend as backrest, integrated continuous edge construction
base enclosure	Fabric-wrapped solid wood frame base, no exposed legs or feet
throw cushions	Matching fabric cover, down and soft polyester fiber fill
stitching details	8 stitches per inch reinforced seam construction
Timber Frame Section / Moisture	Primary section ≥30 × 50 mm; recommended moisture 12%
Spring / Webbing Specification	Sinuous spring wire 4 mm; elastic webbing 70 mm wide
Leg Connector Specification	Reference M8-M10 with at least 1 mechanical fixing per leg

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

seating configuration	Two-module straight block layout, fixed non-reclining backrest
cushion design	Fixed attached seat and back cushions, loose reversible throw cushions
backrest angle	105 degrees from horizontal seat surface
armrest function	Full-width padded fold-over armrests doubling as side headrests for side reclining
base installation	Zero-clearance placement, no gap required between sofa bottom and finished floor
fabric maintenance	Surface wipe-clean with damp cloth, dry-clean only for heavy soiling
customization option	Available in multiple length options and neutral fabric colorways
modular connection	Two base sections connect with pre-installed metal locking brackets for stable alignment
Cushion Service Configuration	Recommended 2removable/replaceable cushion methods

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Module Carton Dimensions	2200× 1050× 850 mm
Reference Packaging Volume	1.8 m³/item
Reference Packaged Gross Weight	110 kg/item

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

residential living room main seating	Suitable for modern, minimalist or neoclassical living rooms paired with low coffee tables
lounge and casual entertainment space	Deep soft seat ideal for movie watching, reading and extended casual seating
open-plan apartment seating	3.2m length fits medium to large open living areas without overwhelming space
home media room seating	Low back profile does not block rear sightlines in dedicated media spaces
recommended matching furniture	Pair with 1400 mm long low coffee tables, 450 mm seat height lounge chairs

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12520:2015	Furniture: strength, durability and safety requirements for domestic seating
EN 1021-1:2014	Furniture: assessment of upholstered furniture ignitability (smouldering cigarette)

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to solid wood frame construction
GB/T 1952.1-2012	Soft sofas: performance test and safety requirements for residential use
GB 18401-2010	Applicable standards and test results require confirmation

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to solid wood frame construction；
2. GB/T 1952.1-2012：Soft sofas: performance test and safety requirements for residential use；
3. GB 18401-2010：Applicable standards and test results require confirmation；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · EF-4S-DG-3200

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · EF-4S-DG-3200

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · EF-4S-DG-3200打开导出工具

页面快速操作

发布采购询价

产品描述

The Dark Grey Matte Fabric Low-Profile Floor-Standing 4-Seater Sofa, model EF-4S-DG-3200, is an unbranded upholstered fabric seating piece defined by a sleek, contemporary minimalist silhouette with signature elephant-ear folded arms. It adopts a two-module straight block layout spanning 3200mm wide, with a zero-clearance fabric-wrapped solid wood base that sits flush to the finished floor with no exposed legs, creating a grounded, uncluttered visual presence. The wide, 280mm padded fold-over armrests curve gently to echo soft, folded ear forms, complementing the low 900mm overall profile and overstuffed cushion lines for a relaxed yet refined look. Matching 700mm square throw cushions in the same dark grey fabric add textural balance to the structured frame. Built for long-term durability, the sofa uses a 30mm thick kiln-dried solid larch wood frame with a 12% moisture content, reinforced by 8 stitches per inch seams and supported by a grid of 3.6mm sinuous springs and 50mm wide elastic webbing. The upholstery is 280gsm matte dark grey sanded velvet with a soft hand feel, rated for 50000 abrasion cycles. Seat cushions use a three-layer fill of 45D high-resilience foam, 30D soft foam, and a down-feather top layer, while backrests and armrests use a 30D foam and down blend wrapped in non-woven liners. The 180mm thick seat cushions deliver a 470mm seat height, 622mm seat depth, and 430mm backrest height above the seat, angled 105 degrees for relaxed support, with a total static weight capacity of 350 kg and a 135 kg net weight. Practically, the fixed non-reclining seat and back cushions retain their shape with a 95% compression recovery rate, while loose, reversible throw cushions offer flexible styling. The full-width fold-over armrests double as padded side headrests for casual side reclining, ideal for extended seating during movies or reading. The fabric surface wipes clean with a damp cloth for light stains, requiring dry cleaning for heavy soiling, and the sofa ships in two cartons with a 40-minute assembly time. This piece suits modern, minimalist, or neoclassical residential living rooms paired with 1400mm long low coffee tables and 450mm seat height lounge chairs, and works equally well in casual entertainment lounges, medium to large open-plan apartments, and home media rooms, where its low back profile avoids blocking rear sightlines. Procurement teams should note available customization across multiple length options and neutral fabric colorways, account for the 1.8 cubic meter packaging volume and 110 kg packaged gross weight per item, and confirm that the 3200mm footprint aligns with target space layouts before ordering.

Dark Grey Matte Fabric Low-Profile Floor-Standing 4-Seater Sofa with Elephant-Ear Folded Arms Specifications

供应商与现货