纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2223 × 965 × 737 mm
Seat height from floor	445 mm
Usable seat depth per position	635 mm
Armrest height from seat surface	76 mm
Seat cushion thickness	375 mm
Backrest cushion height above seat	311 mm
Clearance under seat frame	127 mm
Single throw pillow dimensions	450 x 450 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total set net weight	159 kg
Recommended static load per seat position	136 kg
Total seating capacity	6 persons
Cushion foam density	35 kg/m³
Foam rebound rate	60%
Fabric Martindale abrasion resistance	30000 cycles
Frame static load capacity	680 kg
Limited warranty period	1 year
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Upholstery fabric	380g/m² looped boucle polyester in off-white finish
Internal seat frame	Kiln-dried hardwood and laminated plywood, 25mm thickness
Seat support system	3.8mm diameter sinuous steel spring suspension
Seat cushion fill	High-resilience polyurethane foam wrapped in 200g polyester fiber
Back cushion fill	Blown polyester fiber fill for soft lumbar support
Support legs	Solid rubberwood with walnut-tone matte finish, 127mm height
Frame joinery	Dowel and corner-block reinforced joinery at stress points
Seam construction	8 stitches per 50mm reinforced polyester stitching
Throw pillows	Matching boucle cover with polyester fiber fill, invisible zipper closure
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Assembly requirement	Knock-down leg attachment with included hex key hardware
Seating configuration	Fixed upholstered positions with no recline or adjust mechanisms
Cushion retention	Loose seat cushions with non-slip base fabric to prevent sliding
Floor protection	Felt glides pre-installed on leg bases to prevent floor scratches
Cleaning access	Removable cushion covers for spot cleaning of boucle upholstery
Set layout flexibility	Modular arrangement around a central coffee table or facing focal point
Weight distribution	Flared leg geometry to prevent tipping under uneven seat load
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential living room primary seating group	Arranged around a central coffee table for casual lounge and guest seating
Modern minimalist/wabi-sabi style interiors	Soft rounded silhouette and neutral cream finish matches warm neutral palettes
Small office waiting or lounge areas	Low-profile comfortable seating for short-duration visitor use
Apartment open-plan living spaces	Compact curved form avoids sharp corners for tight layout compatibility
Show home and residential staging installations	Coordinated matching set provides cohesive aesthetic for display spaces
Low-maintenance household use	Stain-resistant boucle fabric and fixed construction requires minimal upkeep
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12520:2015	Applicable for strength, durability and safety requirements for domestic seating
EN 1021-1:2014	Applicable for upholstered furniture ignition resistance from smouldering cigarettes

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	Applicable for general technical requirements of wooden furniture frames
GB 18401-2010	Applicable for safety limits of formaldehyde in textile upholstery materials
GB 20286-2006	Applicable for flammability requirements of upholstered seating in public spaces

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：Applicable for general technical requirements of wooden furniture frames；
2. GB 18401-2010：Applicable for safety limits of formaldehyde in textile upholstery materials；
3. GB 20286-2006：Applicable for flammability requirements of upholstered seating in public spaces；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · BLC-SOFA-3PC-WH-WD

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · BLC-SOFA-3PC-WH-WD

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · BLC-SOFA-3PC-WH-WD打开导出工具

页面快速操作

发布采购询价

产品描述

This unbranded 3-piece curved boucle living room sofa set offers a coordinated, soft seating solution rooted in modern wabi-sabi design, defined by rounded arms, a smooth curved silhouette, and a neutral off-white textured finish that blends seamlessly with warm, understated interior palettes. The set includes a 3-seat sofa, 2-seat loveseat, and 1-seat armchair, all built to a consistent seat height of 445mm with matching depth, armrest, and cushion proportions to deliver a uniform visual profile. Pieces can be arranged flexibly around a central coffee table, oriented toward a room focal point, or spaced to fit open-plan and compact layouts alike, with no sharp corners to disrupt tight space flow.
The frame is constructed from kiln-dried hardwood and 25mm laminated plywood, reinforced with dowel and corner-block joinery at all high-stress points, and supported by 127mm solid rubberwood legs with a matte walnut-tone finish. A sinuous steel spring suspension system sits beneath seat cushions filled with high-resilience polyurethane foam wrapped in soft polyester fiber, while back cushions use blown polyester fiber for gentle lumbar support; matching boucle throw pillows with invisible zippers are included for added comfort. The 380g/m² looped boucle polyester upholstery is stitched with reinforced polyester seams, and legs are fitted with pre-installed felt glides to protect floor surfaces.
Each seat position supports a 136kg static load, for a total 6-person seating capacity, with fixed positions that offer no recline or adjustment. Loose seat cushions feature a non-slip base to prevent shifting, and cushion covers are removable for convenient spot cleaning. The set ships knock-down for simple leg attachment using included hex key hardware, with an 40-minute assembly time per set.
This set is well-suited for residential living rooms as a primary seating group, apartment open-plan spaces, small office waiting and lounge areas for short-duration visitor use, and show home staging installations where a cohesive, coordinated aesthetic is desired. Procurement teams should note the set ships in 2 cartons, with no custom upholstery or finish options available for the unbranded stock configuration.

3-Piece Curved Boucle Living Room Sofa Set (3-Seat Sofa, 2-Seat Loveseat, 1-Seat Armchair) Specifications

供应商与现货