The Fully Upholstered Houndstooth Lounge Armchair, model LAC-HD-760is a sculptural lounge seating piece with a compact, residential-inspired form. Its 740 x 760 x 820 mm silhouette is defined by continuous integrated armrests, rounded front edges, padded side panels, and a central open-back cutout. The cutout separates the lower back from the arm structure, reducing visual bulk while retaining a continuous upper back support. This gives the chair a lighter appearance despite its fully upholstered, envelope-like construction. Woven houndstooth-pattern fabric covers the seat, arms, back, and side panels in a tight, visible repeat. The tailored upholstery uses sewn corners and wrapped panel edges for a clean, finished look. Beneath the fabric is a concealed rigid support frame made with an 18 mm hardwood-composite or plywood panel structure. The seat combines a padded flexible cushion over a concealed load-bearing deck, supported by a 12 mm structural board or webbing-supported deck. Finished cushion thickness is 90 mm, while the seat foam specification is 100 mm at 35 kg/m3 density. The backrest has 70 mm of finished padding and 60 mm foam at 28 kg/m3 density. Concealed stiffeners reinforce the rounded arm nosings and front seat edge. Designed for one adult, the chair uses a fixed relaxed lounge posture with a 430 mm seat height and a 12-degree angled backrest. The clear width between armrests is 540 mm, and the integrated arm panels rise 210 mm above the seat before wrapping around the front edge. The 240 mm lumbar support zone contributes to the structured lounge position. Two broad upholstered side panels form low support feet, transferring load directly to the floor without exposed legs, casters, swivel, tilt, or folding mechanisms. The suggested user weight capacity is 135 kg, and the net weight is 18 kg. The chair works as a standalone reading seat in a living room or bedroom, and as an accent piece near a window, writing area, vanity, or bed. It is also suited to hotel guest rooms, executive lounges, boutique office reception areas, studio visitor spaces, and retail showroom displays that highlight houndstooth upholstery and rounded sculptural lines. Planning should allow the 740 x 760 mm footprint plus 300 mm rear clearance for moving and cleaning; the open under-seat gap provides limited access to the floor beneath the front and side edges. Procurement teams should note that each set is supplied in two cartons with a packaged gross weight of 23 kg, carton dimensions of 850 x 420 x 720 mm, and 0.26 m3 carton volume. Reference assembly time is 40 minutes per set, and the indicative 20GP loading quantity is 135 sets at 85 percent space utilization. As an unbranded model, buyers should confirm fabric coloration, upholstery protection, and assembly hardware before specification.