The Teal Upholstered Block Armchair is a modern lounge chair with a calm, tailored silhouette. Its teal woven velvet-look polyester upholstery covers a continuous seat and back, while the arms and legs form a unified block frame. Rectangular side apertures add visual lightness, and the low, padded arm rails give the chair a structured yet soft appearance. Each chair is 760 mm wide, 750 mm deep, and 800 mm high, with a 540 mm clear width between the arms, creating a compact single-seat lounge position. Construction balances comfort with structural support. The internal frame uses kiln-dried timber or engineered wood with 30 mm nominal members, joined with staples, screws, and corner blocks. The seat platform combines 12 mm plywood or equivalent structural board with webbing, and a black non-woven dust cover finishes the underside. Armrests use a timber or engineered-wood inner frame wrapped in foam and fabric, while the four upholstered block supports are integrated with the arm frame. Seat padding consists of high-resilience polyurethane foam, and the back is an upholstered foam panel over rigid backing. The finished seat cushion is 90 mm thick, with 70 mm of backrest padding and a 240 mm high lumbar support zone. Designed for stationary use, the chair holds one adult and is rated for a 120 kg static seated load. It features an upright 100-degree back angle, a 430 mm seat height, and continuous padded arms at 610 mm floor height. The 260 by 140 mm cut-out in each arm provides open visual space without interrupting arm support. Hidden glides should be fitted beneath each support to protect flooring. The chair has no casters and does not swivel, suiting settings where stable seating is preferred. This model works well in hotel lobbies, club rooms, office waiting zones, and collaboration breakout areas. It also serves as a residential reading chair beside a sofa, a relaxed seat in a bedroom dressing corner, or display seating in boutiques and experience centers. For senior-care or guest areas, its padded arms and fixed base offer a reassuring seating form. Procurement teams should note the unbranded model number LCH-TEAL-BLOCK-760. Each set is supplied in two cartons, with packaged gross weight of 23 kg and reference carton volume of 0.26 cubic meter per set. Reference assembly time is 40 minutes, and a 40HQ container accommodates 130 cartons. Durability targets include 50,000 seat-loading cycles, 480 kg frame static proof load at the seat center, and foam compression set acceptance of 8 percent maximum after 72 hours.