The Fully Upholstered Curved Lounge Chair with Ottoman is an unbranded lounge seating set, model LCH-BOUCLE-CURVED-01-SET, defined by a soft contemporary silhouette and coordinated footrest. Pink woven boucle-style fabric covers the padded chair and matching ottoman, creating a textured residential appearance suited to interiors that combine comfort with a sculptural visual form. The chair presents a low-profile, curved, semi-enclosing back that wraps laterally around the sitter, while integrated wrap-around armrests merge smoothly into the backrest at 600 mm above the floor. This continuous upholstered form gives the piece a soft enclosed profile and a clear focal point in relaxed seating arrangements. The separate ottoman aligns with the front edge of the chair and is finished in the same pink woven fabric. Construction centres on a kiln-dried hardwood or birch plywood load frame with a nominal board thickness of 25 mm, enclosed by a curved rigid shell and padding. The seat uses a removable high-resilience polyurethane cushion with a 150 mm core, listed finished cushion thickness of 90 mm, and foam density of 35 kg/m3. Back and arm padding consists of polyurethane foam with 28 kg/m3 back foam density, 70 mm backrest padding thickness, and 120 mm visible depth over the curved shell. A 240 mm lumbar support zone and 540 mm clear width between armrests support a single-person relaxed lounge posture. The chair has a 600 mm seat depth and 420 mm seat height, with a net weight of 28 kg and static load capacity of 160 kg. The recommended user height is 1850 mm. Foam rebound is rated at 40 percent, and the fabric acceptance level is 50000 Martindale cycles. Both pieces use bridge-style sled construction. The chair rests on a rigid upholstered twin-panel base with broad floor-contacting ends, while the ottoman uses a fabric-covered plywood or timber bridge frame with an open center. The ottoman cushion is 120 mm thick and its footrest height is 400 mm. A black non-woven dust cover finishes the underside, and adhesive polymer glides with 2 mm nominal thickness protect the floor. The chair is fixed rather than swivel or recline enabled, emphasizing stable lounging and leg rest support. The set is appropriate for hotel lobby waiting corners and guestroom relaxation areas, office breakout zones, reception spaces, residential reading corners or bedrooms, boutique retail and beauty salon lounges, showroom waiting areas, and senior living common areas where a 420 mm seat and broad arm support are preferred. Procurement teams should note that one set ships in two cartons, with 850 by 420 by 720 mm carton dimensions, 0.26 cubic meters total volume, and 23 kg packaged gross weight per set. Reference assembly time is 40 minutes, and a 20GP container can accommodate 135 sets at 85 percent space utilization.