The LAC-DOT-760 lounge chair is an unbranded upholstered armchair with a low-profile lounge form, continuous curved arms, and a fully upholstered back. Its woven white-base fabric with uniform black dots gives the chair a distinctive graphic appearance, while the dark stained bentwood arms and perimeter rails provide a warm contrasting frame. The integrated back, generous seat, and rounded arm lines create a compact silhouette suited to both residential reading corners and curated commercial seating areas. Its clear width between armrests is 540 mm, and overall dimensions are 760 x 780 x 790 mm. The chair weighs 24 kg and is intended for users up to 130 kg. Construction combines an internal kiln-dried hardwood and plywood seat box with dark stained laminated bentwood rails, supported by elastic webbing over timber rails. The curved arm frames are finished with a smooth dark lacquer or stain coating. Seat and back upholstery are fitted and fixed, with sewn fabric closures along the cushion perimeter. The finished seat cushion is 90 mm thick and uses 140 mm high-resilience polyurethane foam at 35 kg/m3 density. The backrest has 70 mm finished padding, 120 mm polyurethane foam with a soft-contact layer, and 28 kg/m3 foam density. A 240 mm lumbar support zone and a 100-degree back angle promote a relaxed upright posture. Each continuous bentwood arm provides support at 610 mm floor height. The low perimeter base is stationary, with no swivel or rocker mechanism, and uses concealed glide feet suitable for hard floors. Because the chair has no casters, repositioning requires lifting. The chair works as a single accent seat beside a living-room sofa, in a bedroom dressing or window area, or next to a vanity. It is also suitable for hotel guestrooms, suites, lift lobbies, boutique reception spaces, design studios, galleries, cafe lounge corners, and mid-century or contemporary showroom displays. In cafe settings, a protected fabric maintenance plan is advisable. Procurement planning should account for delivery as one set in two cartons, an indicated assembly time of 40 minutes, packaged gross weight of 23 kg per set, and carton volume of 0.26 cubic meter per set. The design supports pairs or grouped arrangements, while fixed upholstery and a stationary base should be reviewed where frequent movement or interchangeable cushions are required.