纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	600 × 450 × 650 mm
tabletop thickness	25 mm
storage body height	260 mm
leg height	390 mm
leg diameter at floor contact	25 mm
under-unit floor clearance	370 mm
drawer front panel height	240 mm
top inset recess depth	5 mm
leg splay angle from vertical	8 degrees
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

product net weight	22 kg
tabletop static load capacity	50 kg
total enclosed storage volume	38 L
recommended maximum user weight for top use	100 kg
surface scratch resistance (wood finish)	Class 2
drawer slide cycle rating	30000 cycles
Reference Static Load	150 kg depending on category
Moving-part Durability Reference	Acceptance target 50000 cycles
Recommended Procurement Warranty	Structure 5 years; hardware 3 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

storage body frame	18mm thick MDF core with smoked oak veneer, matte lacquer finish
inset tabletop	25mm thick sintered stone, matte light beige finish
support legs	25mm diameter solid beech wood, dark ebonized matte finish
drawer slides	Cold-rolled steel 3-section full-extension slides, black powder coat
drawer box construction	12mm thick plywood with dovetail joinery, anti-tip stop
tabletop edge banding	Matching smoked wood veneer edge, 2mm radius rounded profile
leg mounting plates	2mm thick galvanized steel, pre-installed to body base
drawer front panels	Matching smoked wood veneer on MDF, flush fit to body
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints
Reference Finish / Color Count	Recommended 6finish options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

drawer operation	Two soft-close full-extension drawers with push-to-open release
leg assembly	Four legs thread into pre-installed mounting plates, no tools required
floor protection	Each leg fitted with 5mm thick non-slip felt pad to prevent floor scratching
surface maintenance	Matte finish resists fingerprints and water rings, wipe clean with damp cloth
storage access	Drawers extend 350mm to provide full access to internal storage space
anti-tip stability	Splayed leg configuration creates 620mm wide support base to prevent tipping
load distribution	Reinforced corner blocks at leg attachment points support full rated top load
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

residential bedroom bedside use	Placed adjacent to single or queen size beds for lamp, book and personal item storage
sofa side end table use	Positioned next to upholstered sofas in living rooms for drink, remote and accessory placement
modern contemporary interior schemes	Coordinates with minimalist, mid-century modern and Italian-design inspired interiors
small space apartment installation	Compact footprint fits in narrow bedroom gaps or small living room layouts
matched bedroom set configuration	Pairs with platform beds, dressers and wardrobes in dark smoked wood finish

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 14749:2016	Domestic and kitchen storage units and worktops - safety requirements, applicable to stability and strength
EN 12521:2015	Furniture - strength, durability and safety for domestic tables, applicable to top load testing

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to dimensional and finish quality
GB 18584-2001	Indoor decorating and refurbishing materials - limit of harmful substances in wood furniture

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to dimensional and finish quality；
2. GB 18584-2001：Indoor decorating and refurbishing materials - limit of harmful substances in wood furniture；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · NS-OVL-DW-600

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · NS-OVL-DW-600

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · NS-OVL-DW-600打开导出工具

页面快速操作

发布采购询价

产品描述

The Contemporary Oval Smoked Wood Nightstand (model NS-OVL-DW-600) is an unbranded versatile occasional storage piece defined by its soft, streamlined contemporary silhouette. Its oval form balances a deep smoked wood storage body with a contrasting light beige inset sintered stone tabletop, set atop four dark tapered solid beech legs angled in a splayed configuration to form a stable 620mm wide support base. The tabletop features a 5mm deep recess to hold the inset surface, finished with 2mm radius rounded smoked wood veneer edge banding for a smooth, polished look; flush-fit drawer fronts align seamlessly with the body for a clean, uncluttered visual profile, with no protruding hardware to disrupt the sleek lines. Constructed for lasting daily use, the nightstand’s storage body is built from an 18mm thick MDF core clad in smoked oak veneer with a matte lacquer finish, rated Class 2 for surface scratch resistance. The 25mm thick inset sintered stone top sits flush within the wood frame, while the 25mm diameter ebonized solid beech legs thread into pre-installed 2mm thick galvanized steel mounting plates reinforced with corner blocks to distribute load evenly. Each drawer features 12mm thick dovetail-joined plywood construction with an anti-tip stop, riding on black powder-coated cold-rolled steel 3-section full-extension slides rated for 30,000 open-close cycles. Major joints use M6-M10 connectors with a minimum of two fixing points for structural rigidity. Practical functionality is centered on accessible, user-friendly storage. Two soft-close full-extension drawers open via push-to-release, extending 350mm to deliver full access to 38L of enclosed storage, ideal for stowing personal items out of sight. The matte finish resists fingerprints and water rings, requiring only a damp cloth for routine cleaning. Each leg is fitted with a 5mm thick non-slip felt pad to prevent floor scuffs, and the 370mm under-unit clearance leaves open space below for easy floor cleaning or placement of slim slipper bins. The tabletop supports a 50kg static load, with a 100kg recommended maximum user weight for top surface use. Tool-free leg assembly takes 40 minutes per set, with the unit packaged across two cartons for delivery. The nightstand fits seamlessly in multiple settings: it works as a bedside table adjacent to single or queen size beds to hold lamps, books and nighttime essentials, or as a sofa-side end table in living rooms to hold drinks, remotes and decorative accessories. Its compact 600 x 450 x 650 mm footprint suits narrow gaps in small apartment layouts, and its finish palette coordinates with minimalist, mid-century modern, and Italian-design inspired interiors, pairing naturally with matching smoked wood platform beds, dressers, and wardrobes for cohesive bedroom sets. Procurement teams should note the unit’s 22kg net weight and 120kg packaged gross weight across 0.8 cubic meters of packaging volume, as well as the requirement for coordinated handling for two-carton deliveries.

Contemporary Oval Smoked Wood Nightstand with Light Inset Top Specifications

供应商与现货