The Traditional Raised-Panel Freestanding Movable Wood Office Workstation Partition, model OFP-WD-5PG-C, is an unbranded wooden divider designed to balance classic aesthetic appeal with flexible workspace utility. Its visual design draws from traditional millwork conventions, featuring structured raised-panel sections framed by solid rubberwood vertical pilaster posts with a 76 x 76 mm cross-section, finished in a warm reddish-brown mahogany stain that lends a formal, cohesive look to professional environments. The full assembled unit spans 3600 mm in length, stands 1067 mm tall, and measures 76 mm deep, with 44 mm thick fixed panels each holding a 520 mm wide raised inset, positioned alongside a central 720 mm wide hinged pass-through gate segment. Construction pairs a medium-density fiberboard core with a 0.6 mm mahogany-stained wood veneer facing, supported by 76 mm diameter polyurethane swivel casters on the gate segment, cold-rolled steel butt hinges, and zinc-plated steel confirmat screw fasteners. Fixed panel segments rest on level plinth bases, while interlocking pilaster connectors securely join individual segments during assembly, which takes 40 minutes per set for on-site setup. The 68 kg unit supports a 150 kg uniformly distributed top static load, withstands 45 kg of static lateral load per panel, and features a surface abrasion resistance rated for 400 cycles, with gate hinges tested to 50000 open-close cycles and each caster rated for 34 kg of load. Functionally, the solid full-height panels block seated line of sight between adjacent workstations to deliver consistent visual privacy without blocking overhead light, while the double-panel pass-through gate swings 180 degrees to allow clear personnel access with a 914 mm clear opening height. The independent caster-mounted gate segment enables easy reconfiguration of access points without moving the entire partition structure. This partition is well-suited for traditional executive office workstations, where it creates discrete desk boundaries that align with formal interior design schemes, as well as formal courtroom and council chamber spaces, where its classic wood finish matches existing traditional millwork for bench rail installation or defined area demarcation. Procurement teams should note the unit ships as one set across multiple cartons, with a total packaged gross weight of 180 kg and 1 m³ total packaging volume, requiring coordinated delivery and on-site assembly planning. The caster-mounted design is intended for use on level interior flooring to ensure stable placement and smooth gate operation.