The Cartoon Mouse-Ear Upholstered Kids Storage Bed (Model T02#) is an unbranded children’s bedroom furniture piece designed to blend playful design, functional storage, and safe, durable construction for single-occupant use. Visually, it features a distinctive padded headboard capped with rounded, protruding mouse-ear details that anchor its cartoon-themed aesthetic, with a low-profile platform frame that sits close to the floor for a approachable, child-friendly silhouette. The bed is offered in 2 color options, finished with smooth, uniform upholstery that complements modern, cartoon-themed, and Scandinavian neutral kids’ bedroom decor schemes. Its overall dimensions measure 1580 x 2080 x 1180 mm, with the headboard reaching a full height of 1180 mm, each mouse-ear protrusion measuring 380 mm in diameter, and side rails sitting 380 mm above the floor. Construction prioritizes lasting stability and soft, safe surfaces: the headboard is upholstered in 1.2mm thick soft faux leather over 30mm high-density foam, while matching faux leather covers 15mm plywood bed side rails. The inner support frame uses 30mm thick kiln-dried solid pine structural members, reinforced by a 40mm thick solid wood center beam with two support legs, plus curved plywood slats supporting the mattress. Three integrated under-bed storage drawers are built from 15mm thick particle board, fitted with full-extension side-mounted metal slides rated for 10000 open/close cycles, and finished with recessed matte black rectangular metal pulls. The bed rests on 20mm tall recessed black plastic support feet, with upholstery tested to 30000 Martindale abrasion cycles for long-term resistance to daily wear. For practical use, the padded headboard doubles as a soft backrest for seated reading, while the 320mm high sleep surface reduces fall risk for young children, and a recessed support lip holds compatible 1500 x 2000 mm mattresses securely in place to prevent shifting. The three front-facing pull-out drawers provide accessible under-bed storage for clothing, toys, or bedding, with full-extension slides allowing complete access to all interior drawer space. This bed is suitable for children’s bedrooms, youth secondary bedrooms, and kids’ rooms in small urban apartments, designed for single occupants up to 16 years of age, with a recommended user weight limit of 120 kg and a 300 kg total static load capacity for the sleep surface. When purchasing, note the bed requires knock-down assembly with cam-lock and bolt connectors, with a reference assembly time of 40 minutes per set, shipped across 2 cartons with a total packaged gross weight of 130 kg. Proper placement requires positioning the headboard flush against a solid wall, with 500 mm of side clearance to fully open the storage drawers. For a coordinated room setup, pair the bed with a 1500x2000mm, 20cm thick youth mattress and two matching 2-drawer nightstands that align with the bed’s color and finish.