纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2400 × 1450 × 1200 mm
Overall footprint (2-station unit)	2400 x 1450 x 1200 mm
Single L-segment work surface	1500 x 600 mm
Standard desktop height	750 mm
Total partition height above floor	1200 mm
Desktop thickness	25 mm
Partition panel thickness	40 mm
3-drawer storage pedestal	400 x 550 x 725 mm
Sitting knee clearance height	670 mm
Cable grommet diameter	60 mm
Upper translucent panel height	400 mm
Lower solid partition panel height	800 mm
Footrest ledge depth at partition base	150 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Per-station desktop uniform static load	150 kg
Single drawer load rating	30 kg
Drawer slide open/close cycle rating	50000 cycles
Steel frame static load rating (total unit)	300 kg
Total unit reference net weight	155 kg
Laminate surface wear resistance (rub rating)	20000 rubs
Adjustable leveling foot adjustment range	10 mm
Standard commercial parts and hardware warranty	5 years
Reference Static Load	150 kg depending on category
Moving-part Durability Reference	Acceptance target 50000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Work surface	25mm E1 grade MFC with melamine laminate, 2mm PVC rounded edge banding
Partition framing	1.2mm thick cold-rolled steel, white powder-coated, rust and corrosion resistant
Upper partition section	5mm frosted tempered acrylic, 50% light transmission, anti-glare finish
Lower partition section	18mm E1 grade MFC with matching light wood melamine finish
3-drawer pedestal	18mm MFC cabinet body, silver powder-coated steel drawer fronts, central lock
Drawer slides	3-section full-extension silent steel ball-bearing slides
Integrated footrest ledge	1.2mm steel frame with matching MFC top surface
Cable management components	ABS plastic cable grommets, under-desk steel cable tray along partition base
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints
Reference Finish / Color Count	Recommended 6finish options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Cable routing system	One 60mm grommet per work surface, internal cable chase in partition base
Drawer locking system	Central interlocking lock, one key secures all three pedestal drawers
Knee space design	Curved concave cutout at seated position, 670mm minimum vertical clearance
Partition privacy design	1200mm mid-height dividers with frosted upper panel, 50% light transmission
Integrated footrest	150mm deep raised ledge at partition base under each station
Modular connection system	Bolt-together steel frame connectors for reconfiguration or expansion
Leveling adjustment	Threaded adjustable feet at all support points, 10mm vertical travel
Storage configuration	Three equal-height drawers in left pedestal for stationery and file storage
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Open-plan office workspace	Provides individual privacy for two staff in shared office areas
Administrative and back-office departments	Suitable for HR, finance, and clerical roles needing document storage
Call center and shared team zones	Compact footprint maximizes seat count without sacrificing work space
Startup and co-working spaces	Modular design supports flexible reconfiguration as teams change
Government and institutional offices	Meets standard public procurement durability and emission requirements
Standard ergonomic setup	Pairs with mid-back office chairs and monitor arms for seated work

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 527-2:2002	Office work tables, safety and strength requirements for work surfaces
EN 15372:2016	Furniture, strength and durability for non-domestic office storage units
EN 13986:2004	Wood-based panels for construction and furniture use, emission limits

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

北美市场选型与验收参考	ANSI/BIFMA X5.5 办公桌及桌类产品

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to desk and partition components
GB 18580-2017	Formaldehyde emission limit ≤0.124mg/m³ for wood-based panels used in furniture
GB/T 3327-2017	Performance requirements for office desks, covering static load and durability
GB/T 4897.3-2015	Requirements for particleboard used in furniture structural components

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to desk and partition components；
2. GB 18580-2017：Formaldehyde emission limit ≤0.124mg/m³ for wood-based panels used in furniture；
3. GB/T 3327-2017：Performance requirements for office desks, covering static load and durability；
4. GB/T 4897.3-2015：Requirements for particleboard used in furniture structural components；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · WS-L2-CURVED-1200H-LWOOD

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · WS-L2-CURVED-1200H-LWOOD

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · WS-L2-CURVED-1200H-LWOOD打开导出工具

页面快速操作

发布采购询价

产品描述

This 2-person back-to-back L-shaped office cubicle workstation features a balanced light wood and white finish, with a structured layout that places two opposing L-shaped work surfaces around a central mid-height partition system. The design incorporates curved concave knee cutouts at each seated position to support natural posture, paired with an integrated raised footrest ledge beneath every station for extended seated comfort. Mid-height dividers deliver defined personal space without fully enclosing work areas, with a frosted acrylic upper section that transmits soft, diffused light and reduces glare, while the solid lower partition matches the desktop finish for visual cohesion across the unit.
The workstation is built around a powder-coated cold-rolled steel frame, with rust and corrosion resistant coating on all framing components. Work surfaces are constructed from E1 grade MFC with a durable melamine laminate face, finished with rounded PVC edge banding for smooth, impact-resistant edges. The partition system pairs thick solid MFC lower panels with frosted tempered acrylic upper panels. A matching lockable 3-drawer pedestal comes integrated with each unit, featuring steel drawer fronts, full-extension silent ball-bearing slides, and a central interlocking lock that secures all drawers with a single key. Cable management is addressed through dedicated grommets on each work surface and an under-desk steel cable tray routed along the partition base, while threaded adjustable feet at all support points allow stable placement on uneven flooring.
Practical functions include a modular bolt-together connection system that supports easy reconfiguration or expansion as space needs change, alongside static load ratings that support regular office equipment, files, and daily use. The drawer slides are rated for long-term repeated use, and the melamine desktop surface resists wear from regular office activity.
This workstation is well suited for open-plan office environments, administrative and back-of-house departments handling document-heavy work, call centers, startup and co-working spaces, and government or institutional offices that require durable, compliant public furniture. It pairs seamlessly with standard mid-back office chairs and monitor arms for ergonomic seated work setups, and its compact footprint maximizes usable seating capacity without restricting individual work surface area.
For procurement, note the unit ships across two cartons, with a straightforward assembly process, and is compatible with standard modular office layout planning. It meets standard public furniture durability and low-emission requirements, and its unbranded design allows flexible integration into existing office design schemes without conflicting with established decor palettes. When planning installation, account for required clearance around the unit to allow comfortable chair movement and access to storage pedestals, and confirm compatibility with existing cable infrastructure to leverage the built-in cable routing features.

2-Person Back-to-Back L-Shaped Office Cubicle Workstation with Dividers and 3-Drawer Pedestal Specifications

供应商与现货