The Single-Person L-Shaped Cubicle Workstation with Integrated Storage Hutch, model CW-L1500-HS-WG, presents a compact corner workspace with a warm walnut-grain work surface and coordinated warm grey case panels. Its 1500 x 1500 x 1200 mm footprint pairs a 1400 x 600 x 25 mm main desktop with a full-height side storage return, producing a clear seated zone for one occupant. At the rear, a 1200 mm privacy screen combines a solid walnut-grain lower fascia and grey trim with a frosted, ribbed translucent upper band. The band moderates visibility while allowing light and a degree of visual connection above the work surface. Built from melamine-faced engineered wood, the desk and storage cabinet use sealed substrates, matching exposed panel edges, and 2 mm PVC edge banding with a subtly rounded front profile. The privacy panel is set in a grey metal or hard-plastic frame, while metal hardware, steel three-section ball-bearing drawer slides, and threaded leveling glides complete the construction. Open storage consists of four upper hutch compartments and two lower bays, suited to books, binders, documents, and daily equipment. A keyed walnut-grain lower compartment secures personal items or confidential materials, and the drawer slides are rated for 50,000 opening cycles. The desktop supports a distributed load of 91 kg, each open shelf supports 16 kg, and the lockable compartment supports 15 kg. A white oval cable grommet with removable cover and brush or slot opening routes monitor and power leads into the enclosed rear cavity, helping keep the 750 mm writing surface orderly. Knee clearance measures 600 mm wide by 500 mm deep by 680 mm high, and each leveling glide allows 10 mm of vertical compensation for uneven floors. This unbranded workstation is appropriate for open-plan individual positions, administrative and accounting roles, call-center or shared-service areas, small private offices, training administration rooms, and project-team neighborhoods. Units can be placed in rows or clusters using compatible panel-edge profiles. For procurement, note that the product is supplied as one set in two cartons, with reference assembly time of 40 minutes per set, packaging volume of 0.8 cubic meter, and stated packaged gross weight of 120 kg per set; the product net weight is 136 kg.