This unbranded 2-Person Curved Corner Modular Office Cubicle Workstation, model CWS-2P-CRV-MP-LM/W, is a space-efficient shared desk solution with a two-tone light maple and white finish. The curved corner layout places two inward-facing work positions around a gentle inner curve, with an overall footprint of 2400 x 1800 x 1200 mm. Partial-height privacy partitions rise 450 mm above the 750 mm high work surface, blocking direct line of sight between adjacent users while preserving open sightlines across the wider office space. Work surfaces are 30 mm thick E1-grade low-emission melamine-faced chipboard with light maple finish, trimmed with 2 mm impact-resistant PVC edge banding. Each individual work surface offers 700 mm depth, paired with 680 mm under-desk knee clearance and 900 mm of open width at the inner curved corner for comfortable seating. Partition frames are constructed from 1.2 mm thick white powder-coated steel tubing, with upper infill panels of pinnable light-beige woven polyester fabric and lower infill panels of white melamine-faced particleboard. Vertical support side panels and full-height modesty panels use 25 mm thick white melamine-faced chipboard, concealing under-desk wiring and user legs for a polished appearance. The included lockable mobile storage pedestal is built from 18 mm thick white melamine-faced board, with two-tone light maple and white drawer fronts. It features one top drawer and one lower storage compartment, secured with a key lock, and rides on black nylon swivel casters, two of which include brake locks to hold the unit in place during use. Integrated desktop cable grommets route power and data cords below the work surface to reduce surface clutter. The cam-lock connected pre-finished modular panel system supports straightforward on-site assembly, with a reference assembly time of 40 minutes per set. Each work surface supports a static distributed load of 150 kg, while each pedestal drawer holds a 30 kg static load; the melamine surface delivers 2000 cycles of abrasion resistance, and pedestal casters are rated for 10000 rolling cycles. The fully assembled unit weighs 185 kg, and comes packaged in two cartons with a packaged gross weight of 120 kg and packaging volume of 0.8 m³, backed by a 5-year recommended warranty. This workstation is well suited for open-plan corporate office zones, shared administrative or customer service work areas, small business fit-outs, co-working dedicated desk pods, call center team clusters, and phased modular office expansion projects. Procurement teams should note the corner placement requirement to maximize floor space efficiency, confirm alignment with existing modular cubicle systems for expansion use, and account for the 2-person seating capacity when planning workspace layouts.