纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1200 × 600 × 1200 mm
Overall installed dimensions	1200 x 600 x 1200 mm
Desk work surface height	750 mm
Desk top thickness	25 mm
Total partition height from floor	1200 mm
Lower solid partition panel height	900 mm
Upper frosted slatted screen height	300 mm
Partition panel thickness	30 mm
Under-desk knee clearance height	670 mm
Knee clearance width	700 mm
Mobile pedestal dimensions	450 x 500 x 660 mm
Cable grommet diameter	60 mm
Leveling foot adjustment range	15 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total product net weight	80 kg
Maximum desk top static load capacity	100 kg
Mobile pedestal drawer static load	25 kg
Mobile pedestal cabinet shelf load	30 kg
Caster rolling load rating per unit	40 kg
Melamine surface abrasion resistance	2000 cycles
Recommended user capacity	1 person
Product structural warranty	5 years
Reference Static Load	150 kg depending on category
Moving-part Durability Reference	Acceptance target 50000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Desk work surface	25mm E1-grade melamine-faced particleboard, anti-scratch, water-resistant
Partition structural frame	1.2mm thick silver anodized aluminum extrusion framing
Lower partition panels	18mm melamine-faced particleboard, light beige front, dark grey modesty side
Upper privacy screens	5mm thick frosted slatted translucent acrylic panels
Mobile pedestal body	0.8mm thick cold-rolled steel with powder-coated finish, light beige door, grey drawer front
Mobile pedestal casters	50mm diameter nylon twin-wheel office casters, 2 lockable
Desk support frame	1.5mm thick powder-coated steel square tube understructure
Cable grommets	ABS plastic round desk grommets with brush insert
Adjustable leveling feet	Nylon base with steel threaded stem, mounted on frame bottom corners
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints
Reference Finish / Color Count	Recommended 6finish options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

3-sided wrap-around privacy partition	Provides seated visual privacy, reduces cross-desk distraction for individual users
Cable management grommets	Two rear-corner pass-throughs route power and data cables from desk to floor
Lockable mobile pedestal storage	Integrated lock secures upper drawer and lower cabinet, rolls for flexible under-desk placement
Adjustable leveling feet	Rotating feet compensate for uneven floors to keep work surface stable and level
Frosted slatted upper screen	Translucent panels allow ambient light transmission while blocking direct line of sight
Modular knock-down connection system	Aluminum post and bracket assembly allows reconfiguration into multi-seat clusters
Front modesty panel	Solid dark grey panel blocks view of seated user's legs from front approach
Smooth rolling pedestal movement	Twin-wheel casters allow pedestal to slide in/out under desk without floor damage
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Open plan office staff workstations	Modular design allows clustered layout for team work areas with individual privacy
Startup and small business office setups	Cost-effective functional workstation includes built-in storage for small team deployment
Call center and administrative work areas	Seated height and privacy screens reduce distraction for focused task work
Temporary project office spaces	Knock-down design allows fast assembly and reconfiguration for short-term workspaces
Government and enterprise staff zones	Durable commercial construction meets daily high-traffic office use requirements
Co-working dedicated desk stations	Allocated individual workspaces with lockable storage for personal and work items

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 527-2:2002	Office worktables safety and strength requirements, applicable to desk structural performance
EN 1335-1:2020	Office furniture dimensions reference for seated work surface clearance requirements
EN 12521:2015	Furniture strength, durability and safety requirements for commercial storage units

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.5-2021	Desk products performance standard for load, stability and durability testing
ANSI/BIFMA X5.9-2019	Mobile storage pedestal performance standard for drawer and caster durability

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to desk top and panel components
GB/T 3327-2023	Office desk performance test methods, applicable to structural load and stability validation
GB 18580-2017	Formaldehyde emission limits for wood-based panels, E1 grade minimum requirement
GB/T 24821-2023	Office furniture panel partition systems, applicable to cubicle screen structure

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to desk top and panel components；
2. GB/T 3327-2023：Office desk performance test methods, applicable to structural load and stability validation；
3. GB 18580-2017：Formaldehyde emission limits for wood-based panels, E1 grade minimum requirement；
4. GB/T 24821-2023：Office furniture panel partition systems, applicable to cubicle screen structure；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CUB-S1260-MP-BE

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CUB-S1260-MP-BE

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CUB-S1260-MP-BE打开导出工具

页面快速操作

发布采购询价

产品描述

This single-person straight office cubicle workstation desk with mobile pedestal, model CUB-S1260-MP-BE, is an unbranded commercial-grade public furniture solution designed to balance individual focus and flexible layout coordination for modern workspaces. Its overall installed dimensions measure 1200 x 600 x 1200 mm, with a 750 mm high work surface and 670 mm under-desk knee clearance for comfortable seated use. The 3-sided partition structure pairs a 900 mm tall lower solid panel system with a 300 mm tall upper frosted slatted acrylic screen, creating a semi-enclosed workspace: the lower light beige front and dark grey modesty side panels block direct views of the seated user’s legs and lower torso, while the translucent upper screen transmits ambient light without supporting direct cross-desk line of sight, reducing visual distraction without closing off the space entirely. The silver anodized aluminum framing creates a clean, professional visual profile that coordinates with a neutral two-tone finish palette of light beige and dark grey, suited to a wide range of office interior styles. The desk top is constructed from 25 mm thick E1-grade melamine-faced particleboard with anti-scratch, water-resistant properties and 2000 cycles of abrasion resistance, supported by a 1.5 mm thick powder-coated steel square tube understructure fitted with nylon adjustable leveling feet at all corners to compensate for uneven floor surfaces and maintain a stable work surface. The structure supports a maximum 100 kg static load on the desk top, with 80 kg total net weight for the assembled unit. The 30 mm thick lower partition panels connect via an aluminum post and bracket knock-down system that supports reconfiguration into multi-seat clusters as workspace needs evolve. Two rear-corner ABS plastic cable grommets with brush inserts route power and data cables cleanly from the work surface to the floor, reducing cord clutter. The included steel mobile pedestal, fitted with 50 mm diameter nylon twin-wheel casters (two lockable), tucks fully under the desk to offer secure lockable storage for personal items and work materials, with a 25 kg static load rating per drawer and 30 kg rating for the lower cabinet shelf. The workstation is ideally suited for open-plan office staff zones, startup and small business layouts, call center and administrative task areas, temporary project offices, government and enterprise high-traffic work zones, and co-working dedicated desk stations. When procuring, note that units ship as one set across two cartons, with 120 kg packaged gross weight and 0.8 m³ packaging volume per set, requiring 40 minutes of assembly time per unit. No third-party installation services are included as standard, and the modular design allows teams to scale deployments incrementally to match staffing changes.

Single-Person Straight Office Cubicle Workstation Desk with Mobile Pedestal Specifications

供应商与现货