The L-Shaped Single-Person Panel-System Workstation with Privacy Screens and Pedestal, model LWS-1500-PS-PED, is an unbranded office desk designed for individual seated work in layouts that benefit from defined boundaries. Its L-shaped top combines a 1500 mm primary run with a 1400 mm return, creating separate computer and writing zones within a 1500 x 1400 x 1100 mm overall envelope. A concave inner cutout provides curved knee access with an 800 mm wide entry and 680 mm minimum clearance under the top. The work surface is 600 mm deep and built on a 25 mm wood-based particleboard substrate with a light oak melamine face and sealed laminated core. Exposed edges are protected by 2 mm PVC edge banding, while a 50 x 50 x 1.2 mm powder-coated square steel tube leg with an adjustable foot provides support. The rated distributed static load for the worktop is 80 kg. Visual privacy is provided by two 1100 mm high, 60 mm thick panel screens. Lower sections use gray woven fabric over a semi-rigid core, while upper sections use a frosted translucent sheet set in an aluminum perimeter frame. The frame uses anodized or powder-coated 1.2 mm aluminum extrusions. This arrangement blocks seated sight lines while allowing daylight through the upper band. The panel system is rated for a 20 kg lateral stability load. The integrated pedestal offers two stacked drawers, including a lower file drawer for hanging document folders. Its carcass uses 18 mm melamine-faced wood-based board with white exterior panels, and the drawer fronts use 18 mm light oak melamine-faced board with an integrated label and lock area. Side-mounted steel ball-bearing telescopic slides include a stop-out retainer, are rated for 25 kg per drawer, and have a 50000-cycle operating life. One removable-key lock secures both drawers, with a master-keying option and a 10000-cycle lock life. Cable management is centered on an 80 mm corner grommet that accepts six cables and directs monitor and power leads into an under-desk channel. A removable under-top tray carries adapters and cable bundles up to its 10 kg distributed load without occupying knee space. The workstation suits open-plan employee desks, call-center rows, administrative or HR positions, project-team neighborhoods, leased offices, and reception back-office areas. Multiple stations can connect through panel posts or be clustered with shared aisle spacing. Procurement planning should note the knock-down packaging, 40-minute reference assembly time, and the need to review current packing details before ordering, as the supplied logistics information includes both a two-carton reference and a four-carton packaged gross-weight reference of 180 kg per set with a packaging volume of 1 m³.