纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2800 × 2800 × 1200 mm
Finished Top Thickness	50 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Work surface static load capacity	100 kg
Partition panel lateral impact resistance	200 N
Total workstation net weight	210 kg
Designated user capacity	2 people
Adjustable foot maximum leveling load	600 kg per leg
Standard warranty period	3 years
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Work surface substrate	25 mm thick melamine-faced particleboard
Partition frame	1.2 mm thick powder-coated steel tubing
Upper privacy panels	3 mm thick frosted translucent acrylic
Lower partition panels	18 mm thick melamine-faced particleboard
Modesty panel	18 mm thick dark grey melamine-faced particleboard
Mobile pedestal body	0.8 mm thick cold-rolled steel with powder-coated off-white finish
Pedestal casters	50 mm diameter hard nylon swivel casters
Leveling feet	Injection-molded nylon base with steel threaded stem
Hardware components	Zinc-plated steel screws, cam locks and connecting brackets
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Cable management grommet	One 60 mm diameter circular cutout per work position at corner junction, routes power and data cables from desk surface to under-desk space
Mobile pedestal storage	One lockable shallow top drawer for office supplies, one lower hinged door compartment for personal items, rolls freely on four casters to fit fully under desk
Privacy partition system	Frame-supported two-tone panels with upper acrylic sections, creates visual separation between adjacent workstations while allowing overhead light transmission
Floor leveling system	Threaded adjustable feet at all frame base points, rotated to compensate for uneven flooring and eliminate workstation wobble
Modular expandability	Pre-drilled connecting points on steel frame edges, allows addition of extra workstations or reconfiguration of layout without custom modification
Knock-down assembly	Flat-packed component set with included assembly hardware, allows on-site assembly without specialized welding or fabrication tools
Storage compartment locking	Keyed lock on mobile pedestal top drawer, secures drawer and lower door compartment to prevent unauthorized access to stored items
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	Main top 2500× 1050× 350 mm; return/pedestal packed separately
Reference Packaged Gross Weight	180 kg/set in 4 cartons
Reference Packaging Volume	1 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Open-plan office spaces	Provides defined private work zones for staff in open office layouts without full wall construction
Small to medium business work areas	Cost-effective two-person configuration suitable for team expansion with reconfigurable layout capability
Administrative and clerical work positions	Ergonomic 750mm desk height and ample work surface depth suit daily computer, paperwork and administrative tasks
Call center and shared office environments	Partition height balances privacy for focused work and visibility for team communication
Temporary or relocatable office setups	Knock-down assembly and modular connections allow disassembly and relocation during office moves or layout changes
Office layouts requiring integrated storage	Included mobile pedestals provide lockable personal storage without requiring separate free-standing cabinetry

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Office desk load requirement	EN 527:2002 Office furniture - Work tables and desks - Safety requirements
Panel material emission standard	EN 13986:2004 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking
Metal furniture durability	EN 15372:2016 Furniture - Strength, durability and safety - Requirements for non-domestic storage furniture
Furniture surface abrasion resistance	EN 15185:2011 Furniture - Assessment of surface resistance to abrasion

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

Desk load test standard	ANSI/BIFMA X2021Desk Products - Tests for stability, strength and durability
Mobile storage unit standard	ANSI/BIFMA X2019Storage Units - Tests for safety, durability and structural performance

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Work surface dimensional tolerance	GB/T 3324General technical requirements for wooden furniture
Steel frame coating adhesion	GB/T 1993Determination of impact resistance of paint films
Formaldehyde emission limit	GB 18580Indoor decorating and refurbishing materials - Limit of formaldehyde emission from wood-based panels
Hardware corrosion resistance	GB/T 10125Corrosion tests in artificial atmospheres - Salt spray tests
Office furniture stability	GB/T 10357.1Test of mechanical properties of furniture - Strength and durability of tables

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Work surface dimensional tolerance：GB/T 3324General technical requirements for wooden furniture；
2. Steel frame coating adhesion：GB/T 1993Determination of impact resistance of paint films；
3. Formaldehyde emission limit：GB 18580Indoor decorating and refurbishing materials - Limit of formaldehyde emission from wood-based panels；
4. Hardware corrosion resistance：GB/T 10125Corrosion tests in artificial atmospheres - Salt spray tests；
5. Office furniture stability：GB/T 10357.1Test of mechanical properties of furniture - Strength and durability of tables；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CUB-L2-WW-001

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CUB-L2-WW-001

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CUB-L2-WW-001打开导出工具

页面快速操作

发布采购询价

产品描述

The Two-Person L-Shaped Modular Office Cubicle Workstation with Mobile Pedestals is a functional, partitioned panel system designed for flexible workspace planning. Its L-shaped two-person configuration creates distinct adjacent work zones, framed by two-tone privacy partitions that pair lower solid panels with upper frosted translucent acrylic sections. This partition design delivers visual separation for focused tasks while allowing overhead light to filter across the work area, balancing personal privacy and open workspace visibility. The unit is built with a powder-coated steel frame, paired with melamine-faced particleboard work surfaces and lower partition panels, plus zinc-plated steel hardware for secure connections. All frame base points include threaded injection-molded nylon leveling feet to adjust for uneven flooring and eliminate wobble, while each main seat position supports comfortable ergonomic use with dedicated knee clearance. Each work position features an integrated cable grommet at the corner junction to route power and data cables from the desk surface to the under-desk cable tray, reducing surface clutter. The set includes two matching mobile storage pedestals, each fitted with hard nylon swivel casters to roll fully under the desk when not in use. Each pedestal has a lockable shallow top drawer for small office supplies, plus a lower hinged door compartment for personal items, with a single keyed lock securing both storage sections to prevent unauthorized access. Pre-drilled connection points along the steel frame edges support modular expandability, allowing users to add adjacent workstations or reconfigure layouts without custom modifications. The unit ships as a flat-packed set with all required assembly hardware, allowing on-site build without specialized welding or fabrication tools, and supports full disassembly for relocation. This workstation is well suited for open-plan office spaces, small to medium business work areas supporting team expansion, administrative and clerical work positions, call center and shared office environments, temporary or relocatable office setups, and layouts that benefit from integrated, lockable storage without separate free-standing cabinetry. Procurement teams should note the unit ships across multiple cartons, requires on-site assembly, and comes with a 3-year standard warranty. The unbranded model CUB-L2-WW-001 eliminates additional branded overhead costs, making it a practical choice for phased workspace rollouts and flexible floor plan updates.

Two-Person L-Shaped Modular Office Cubicle Workstation with Mobile Pedestals Specifications

供应商与现货