纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	2800 × 2400 × 1100 mm
Finished Top Thickness	50 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended maximum seated users	2
Worktop uniform static load capacity	100 kg
Total product net weight	155 kg
Partition panel sound transmission class	20
Adjustable foot leveler adjustment range	15 mm
Recommended product service life	8 years
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Work surface panel	25mm thick E1 grade particleboard with 0.6mm wear-resistant melamine laminate
Desk side and modesty panels	18mm thick E1 grade particleboard with dark gray melamine finish
Partition panel frame	1.2mm thick extruded aluminum alloy with brushed bronze trim
Partition upper section	Translucent polycarbonate slat inserts with horizontal ribbing
Partition lower section	16mm thick particleboard with dark gray fabric laminate covering
Storage pedestal drawer front	18mm thick particleboard with dark gray melamine finish
Storage pedestal cabinet door	18mm thick particleboard with light oak-effect melamine finish
Base support feet	1.5mm thick steel with black powder coating and adjustable plastic leveler pads
Drawer hardware	Cold-rolled steel drawer slides with zinc plating
Cable grommet	ABS plastic with black finish, 60mm diameter
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Semi-privacy partition system	1100mm high dividers separate adjacent work zones while allowing overhead visibility
Built-in cable management grommet	60mm diameter port at inner worktop corner routes power and data cables to under-desk channels
Adjustable floor levelers	Rotating pads at all base points compensate for uneven floor surfaces up to 15mm
Curved front worktop edge	Contoured arc edge at knee opening reduces pressure on user forearms during extended use
Modular connection design	Pre-drilled joining hardware allows reconfiguration with matching workstation modules
Under-desk modesty panel	Solid dark panel spans knee opening to block leg visibility and conceal under-desk cabling
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	Main top 2500× 1050× 350 mm; return/pedestal packed separately
Reference Packaged Gross Weight	180 kg/set in 4 cartons
Reference Packaging Volume	1 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Open plan office areas	Semi-privacy dividers support focused individual work while maintaining team accessibility
Small business administrative workspaces	Compact dual-seat footprint fits in limited office floor space without separate wall offices
Call center and customer service zones	Modular design allows connection into larger workstation clusters for team deployments
Government and corporate back-office spaces	Durable commercial grade construction meets high-traffic daily use requirements
Temporary project team spaces	Reconfigurable modular structure supports quick layout changes for project-based teams
Co-working space dedicated desks	Integrated storage and cable management provides a permanent dedicated workspace for members

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 527-2:2002+A1:2016	Office worktables safety and strength requirements, applicable to structural load performance
EN 13722:2004	Office furniture storage units safety and strength requirements, applicable to integrated pedestals

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.5-2021	Office desk products performance standard, applicable to worktop load and durability testing
ANSI/BIFMA X5.9-2019	Office storage units performance standard, applicable to drawer and cabinet load ratings
ANSI/BIFMA M7.1-2020	Standard test method for VOC emissions from office furniture systems

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to all wood-based panel components
GB/T 35607-2017	Green product assessment standard for furniture, applicable to VOC and formaldehyde emission limits
GB/T 10357.1-1989	Furniture mechanical performance test for tables, applicable to worktop static and impact load verification

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to all wood-based panel components；
2. GB/T 35607-2017：Green product assessment standard for furniture, applicable to VOC and formaldehyde emission limits；
3. GB/T 10357.1-1989：Furniture mechanical performance test for tables, applicable to worktop static and impact load verification；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · WS-L2P-2800

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · WS-L2P-2800

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · WS-L2P-2800打开导出工具

页面快速操作

发布采购询价

产品描述

The 2-Person L-Shaped Partitioned Office Workstation (model WS-L2P-280) is an unbranded office cluster workstation designed for balanced semi-private collaborative work, with a purpose-built L-shaped layout that positions two seated users at right angles to reduce direct visual distraction while preserving easy cross-team communication. Its 1100mm high partition system combines a brushed bronze 1.2mm extruded aluminum frame, translucent horizontally ribbed polycarbonate slat inserts at the upper section to retain overhead visibility, and dark gray fabric-laminated 16mm particleboard at the lower section to deliver a sound transmission class rating of 20, creating defined individual work zones without full visual or acoustic isolation. Each work surface is crafted from 25mm thick E1 grade particleboard topped with 0.6mm wear-resistant melamine, finished with a contoured curved front edge at the knee opening to reduce forearm pressure during extended use, and supported by 80mm main leg sections with 2mm metal wall thickness, fitted with 1.5mm black powder-coated steel feet paired with 15mm adjustable plastic levelers to compensate for uneven flooring. The finished worktop reaches 50mm total thickness, supporting a 100kg uniform static load, with a 150kg uniformly distributed top static load reference, and offers 680mm high, 900mm wide effective knee clearance per seat, with a dark gray 18mm melamine-finished modesty panel spanning each knee opening to block leg visibility and conceal under-desk cabling. Integrated functional features include a 60mm diameter cable grommet at the inner worktop corner, paired with 80mm diameter cable openings and a 120mm deep under-desk cable tray that holds up to 10 power or data cables with a 10kg tray load, to keep work surfaces free of tangled cords. Each workstation includes built-in storage pedestals, with drawer fronts finished in dark gray 18mm melamine, cabinet doors in light oak-effect 18mm melamine, and drawers fitted with zinc-plated cold-rolled steel slides for smooth operation. All connecting hardware is steel, and the modular pre-drilled connection design allows seamless joining with matching modules to build larger workstation clusters as needed. This model is well-suited for open plan office areas, small business administrative workspaces, call center and customer service zones, government and corporate back-office spaces, temporary project team areas, and co-working space dedicated desks, as its durable commercial-grade construction supports high-traffic daily use, with a recommended 8-year service life. For procurement, note that each set ships across multiple cartons with a total packaged gross weight of 180kg and 1m³ packaging volume, requires 40 minutes of assembly time per set, and carries a total net product weight of 155kg, with no external brand markings for flexible workspace branding alignment.

2-Person L-Shaped Partitioned Office Workstation with Built-In Storage Pedestals Specifications

供应商与现货