The JUESHANGDA Dark Green Fabric Monolithic Shell Lounge Armchair, model LG-CH-MSH-001, presents a modern, sculptural aesthetic defined by its armless wrap silhouette and unified monolithic shell construction. Its fully upholstered form merges integrated arm supports into a continuous static base, with rounded soft upholstered edges that eliminate sharp corners and a low-profile dark green matte woven polyester fabric exterior that carries a subtle textured finish. The dual wide side base panels create a grounded, balanced visual presence that supports freestanding middle-of-room placement without visual clutter from exposed hardware or disjointed components. Beneath its upholstery, the chair is built around an 18mm thick reinforced plywood and fiberglass composite shell, with 14mm bent plywood internal support panels for both the seat and backrest. The seat holds 100mm thick 40kg/m³ high-density polyurethane foam with a 60% rebound rate, while the backrest uses 80mm thick polyurethane foam layered with polyester wadding; all seams use concealed stitching at an 8mm pitch for a seamless exterior. The 120mm thick integrated base is fitted with 5mm thick non-slip felt glides that leave hard flooring surfaces scratch-free, and the upholstery delivers 50,000 double rubs of abrasion resistance for sustained public use. The chair supports a 150kg static load, with a fixed 105° back angle optimized for relaxed casual lounging, and weighs 25kg for easy repositioning by two adults. It ships fully assembled with no on-site installation required. Measuring 955mm long, 826mm wide, and 800mm tall, with a 470mm seat height, 700mm seat width, 560mm seat depth, and 380mm backrest height, the chair fits a range of public and semi-public settings. It functions as sculptural accent seating in hotel lobbies and high-end reception areas, supports informal collaboration in office breakout spaces, complements residential living room seating groups alongside sofas and coffee tables, and creates quiet window-side reading nooks in bedrooms. For commercial procurement, orders are packed as one set across two cartons, with a packaged gross weight of 23kg per set and a total carton volume of 0.26 cubic meters, allowing 135 sets to fit in a 20GP container at 85% space utilization. Buyers should note on-site placement access and layout flow to leverage the chair’s freestanding design flexibility, and confirm floor surface compatibility to maximize the performance of its scratch-free felt glides.