纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	810 × 860 × 860 mm
seat height from floor	520 mm
seat width	580 mm
seat depth	560 mm
seat cushion thickness	180 mm
integrated armrest height	660 mm
backrest total height	760 mm
under-seat clearance	180 mm
matching throw pillow dimensions	450 x 450 mm
metal frame tube width	30 mm
base footprint width	760 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

recommended static load capacity	136 kg
net weight	25 kg
foam density	45 kg/m³
foam rebound rate	60%
seam stitch pitch	8 stitches per 30mm
upholstery abrasion resistance	30000 Martindale cycles
frame static load rating	204 kg
warranty period	2 years
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

support frame	1.5mm thick brass-finish carbon steel tubing
seat and front arm upholstery	1.2mm thick cream matte faux leather
side and back panel upholstery	Navy diamond-quilted woven polyester fabric
seat cushion filling	High-density polyurethane foam wrapped with 20mm soft fiber layer
backrest filling	40mm thick medium-density foam over 9mm plywood back panel
throw pillow filling	100% recycled polyester fiber fill
frame finish	Brushed brass powder coating on steel frame
upholstery edge trim	3mm matching cream piping along panel seams
internal seat support	12mm thick plywood seat pan with sinuous spring support
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

seating configuration	Single fixed-position seating for one adult occupant
back support design	Semi-enclosed wraparound barrel back with integrated armrests
lumbar support accessory	Removable matching cream throw pillow for adjustable lower back support
base stability design	Curved cantilever sled base with four vertical support posts, no casters
floor protection	Pre-installed non-marking plastic glides on base contact points
upholstery maintenance	Stain-resistant faux leather and fabric surfaces allow spot cleaning with mild detergent
assembly requirement	Minimal assembly only requiring attachment of base support bolts to seat frame
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

residential living room placement	Position as standalone accent seating beside sofas or in reading nooks
bedroom dressing area use	Place in bedroom corners or next to vanities for additional seating
hospitality common area use	Install in hotel lobbies, club lounges or high-end reception waiting areas
show home and model suite staging	Use as decorative statement seating in real estate show homes and design studios
private office reception use	Deploy in executive office reception zones or small meeting breakout areas
recommended pairing configuration	Pair with small round marble side table and matching brass finish lighting
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

seating strength and durability	EN 12520:2015
upholstered furniture flammability	EN 1021:2014
furniture hardware performance	EN 15372:2008+A1:2010

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

upholstered furniture safety	GB 28007
furniture mechanical performance	GB/T 10357.3
furniture formaldehyde emission	GB 18584

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. upholstered furniture safety：GB 28007；
2. furniture mechanical performance：GB/T 10357.3；
3. furniture formaldehyde emission：GB 18584；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · ACC-BAR-81086-BRS-NVCRM

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · ACC-BAR-81086-BRS-NVCRM

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · ACC-BAR-81086-BRS-NVCRM打开导出工具

页面快速操作

发布采购询价

产品描述

The Two-Tone Diamond Quilted Barrel Accent Armchair with Brass Sled Base, model ACC-BAR-81086-BRS-NVCRM, presents a refined modern luxury aesthetic defined by its curved semi-enclosed barrel back silhouette with integrated armrests, and balanced two-tone upholstery. The cream matte faux leather covering the seat and front arm panels is contrasted by navy diamond-quilted woven polyester across the side and back panels, accented by matching cream piping along all seams for a polished, tailored finish. Its open curved cantilever sled base, finished in brushed brass powder coating, is supported by four vertical posts that create a lightweight, elevated visual profile, with 180mm of under-seat clearance that keeps the design feeling open rather than bulky in layout. Constructed for durable long-term use, the chair’s support frame uses 1.5mm thick brass-finished carbon steel tubing rated for a 204kg static load, paired with a 12mm plywood seat pan fitted with sinuous spring support. Seat cushions contain high-density polyurethane foam wrapped in a 20mm soft fiber layer, with a 45kg/m³ foam density and 60% rebound rate, topped by 180mm of total cushion thickness. The backrest uses 40mm thick medium-density foam mounted to a 9mm plywood panel, and a removable cream throw pillow filled with 100% recycled polyester fiber is included for adjustable lumbar support. Upholstered surfaces resist stains, allowing spot cleaning with mild detergent, and non-marking plastic glides are pre-installed on base contact points to protect flooring. Seams are stitched at 8 stitches per 30mm, and upholstery carries a 30000 Martindale abrasion resistance rating, with a recommended static load capacity of 136kg for single adult occupants. This fixed-position single-seat chair suits a range of residential and commercial spaces: it works as standalone accent seating beside living room sofas or in reading nooks, as supplementary seating in bedroom corners or next to vanities, and as statement seating in hotel lobbies, club lounges, high-end reception areas, executive office breakout zones, show homes, and design studios. It pairs ideally with small round marble side tables and matching brass-finish lighting. For procurement, note the chair requires minimal assembly, with 40 minutes of assembly time to attach base support bolts to the seat frame. Each set ships across 2 cartons with a total packaged gross weight of 23kg, and 135 sets fit in a 20GP container at 85% space utilization. The chair has no casters, so plan placement for stationary use, and select installation sites aligned with its single-occupant fixed seating design.

Two-Tone Diamond Quilted Barrel Accent Armchair with Brass Sled Base Specifications

供应商与现货