纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	800 × 940 × 790 mm
seat height from floor	445 mm
seat width	800 mm
seat depth	610 mm
backrest height above seat	345 mm
under-seat knee clearance	280 mm
metal plinth base height	20 mm
side panel thickness	120 mm
seat front overhang	80 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

net weight	28 kg
static weight capacity	136 kg
seat foam density	40 kg/m³
seat foam rebound rate	60%
abrasion resistance (Martindale)	30000 cycles
seam stitch pitch	8 stitches per 25 mm
floor protection rating	Non-marring
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

upholstery fabric	Textured boucle/velvet blend woven fabric, 1.2mm thickness
seat padding	40kg/m³ high-resilience polyurethane foam, 165mm core thickness
backrest padding	35kg/m³ high-resilience foam, 100mm thickness
internal support frame	18mm thick engineered plywood, reinforced corner blocking
support spring system	4mm sinuous wire springs spaced 100mm apart
plinth base	1.5mm thick brushed 304 stainless steel, rectangular perimeter frame
floor glides	5mm thick felt pads fitted to base bottom corners
fabric backing	100g non-woven interlining under upholstery
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

ergonomic support	Continuous curved seat-back profile supports 105-degree relaxed lounge recline angle
seating access	Dual open side cutouts allow entry from left or right side of the chair
floor protection	Felt glides under metal base eliminate metal-to-floor contact during placement
structural stability	Perimeter metal plinth base distributes weight evenly across floor contact points
upholstery construction	Taut tailored upholstery with hidden seams along form edges
color customization	Available in 6 standard fabric color options including cream and forest green
installation requirement	Fully assembled delivery with no loose components required for use
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

residential living room	Pairs as standalone accent seating or paired set for casual lounge areas
modern office reception areas	Provides guest seating with minimalist aesthetic for lobby and waiting zones
boutique lounge and waiting spaces	Sculptural form serves as both functional seating and decorative design element
hotel guest room seating	Low-profile design fits beside windows or at foot of bed without blocking sightlines
open plan breakout spaces	Armless design supports flexible seating arrangements for collaborative casual work
recommended surface placement	Suitable for hard flooring, low-pile carpet and polished concrete
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12520:2015	Furniture strength, durability and safety for domestic seating, applicable for residential use verification
EN 1022:2018	Seating stability test standard, applicable to verify tip resistance for armless lounge design

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

North America procurement and testing reference	Recommended references: ANSI/BIFMA X5.4

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to internal frame structural integrity
GB 18584-2001	Limit of harmful substances in wooden furniture, applicable to formaldehyde emission from frame materials
GB/T 1952.2-2008	General technical requirements for upholstered furniture seating, applicable to structural stability

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to internal frame structural integrity；
2. GB 18584-2001：Limit of harmful substances in wooden furniture, applicable to formaldehyde emission from frame materials；
3. GB/T 1952.2-2008：General technical requirements for upholstered furniture seating, applicable to structural stability；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · LCH-MONO-800

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · LCH-MONO-800

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · LCH-MONO-800打开导出工具

页面快速操作

发布采购询价

产品描述

This armless monolithic curved upholstered lounge chair with metal plinth base, model LCH-MONO-800, delivers a sleek, minimalist modern silhouette defined by a continuous, seamless curved seat-to-back profile and clean, unbroken lines. Its low-profile rectangular brushed stainless steel plinth base sits flush to the floor, supporting the sculptural upholstered body without visible legs, while tailored taut upholstery with hidden edge seams maintains a smooth, uncluttered visual presence across all angles. Dual open side cutouts keep the form visually light while enabling access from either the left or right of the seat. Beneath its soft textured exterior, the chair is built for lasting regular use: an 18mm thick engineered plywood internal frame with reinforced corner blocking forms the core, supported by sinuous wire springs and a 14mm bent plywood seat support board. Seat cushions use 40kg/m³ high-resilience polyurethane foam, paired with slightly softer 35kg/m³ foam in the backrest for balanced comfort. The upholstery is a textured boucle-velvet blend woven fabric backed with non-woven interlining, cut and stitched to tight, uniform seam pitch for a polished finish. The thin brushed 304 stainless steel perimeter plinth base is fitted with felt glides at all corners, designed to prevent scuffs and scratches on contact surfaces. Functionally, the chair’s continuous curved profile supports a relaxed 105-degree recline angle for casual, restful seating. The armless design removes access barriers and supports flexible arrangement in grouped layouts, while the perimeter base distributes weight evenly for steady, wobble-free placement. It ships fully assembled with no loose components required for immediate use, and is offered in six standard fabric color options including cream and forest green. This versatile lounge chair fits both residential and commercial settings: it works as a standalone accent chair or paired set in home living rooms, as understated guest seating in modern office reception lobbies and waiting zones, as a sculptural seating element in boutique lounge spaces, as low-profile seating beside windows or at the foot of beds in hotel guest rooms, and as flexible casual seating in open-plan office breakout spaces. It is suitable for placement on hard flooring, low-pile carpet, and polished concrete surfaces. For procurement planning, note that each unit ships across two cartons, with 20GP container loading supporting up to 135 sets at 85% space utilization. The chair’s static weight capacity aligns with standard commercial and residential seating needs, and its non-marring floor glides eliminate the need for additional protective pads for most approved floor surfaces. When specifying, review available standard fabric colors to coordinate with existing interior palettes, and account for its open-side armless form when planning seating layouts to optimize accessible entry points for users.

Armless Monolithic Curved Upholstered Lounge Chair with Metal Plinth Base Specifications

供应商与现货