Name: Two-Tone Beige Teal Quilted Barrel Accent Armchair
Brand: JUESHANGDA
SKU: MG2H5F

纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	780 × 720 × 880 mm
Seat height	470 mm
Seat width	700 mm
Seat depth	660 mm
Backrest height above seat	350 mm
Armrest height above seat	180 mm
Leg taper length	350 mm
Included throw pillow dimensions	450 x 450 mm
Leg splay angle from vertical	15 degrees
Floor clearance under seat	120 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Recommended static load capacity	136 kg
Net product weight	24 kg
Seat foam density	35 kg/m³
Seat foam rebound rate	55%
Seat cushion thickness	100 mm
Backrest padding thickness	60 mm
Seam stitch pitch	8 mm
Upholstery abrasion resistance	30000 Martindale cycles
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Main upholstery	Light beige PU faux leather, 0.8 mm thickness
Back accent panel	Teal PU faux leather with diamond quilted stitching
Contrast trim	Teal faux leather piping along all upholstery seams
Internal frame	18 mm thick solid and engineered wood composite
Leg construction	25 mm diameter matte black powder-coated tapered iron legs
Seat support	Elastic webbing suspension under padded seat
Fill material	High-density polyurethane foam with polyester fiber wrap
Foot pads	Non-slip plastic floor protection pads on each leg base
Throw pillow cover	Matching beige PU faux leather with polyester fiber fill
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Base type	Fixed four-point splayed leg base with no swivel or recline mechanism
Assembly requirement	Partial knock-down assembly, leg attachment required with included hardware
Seat orientation	Upright casual seating posture with integrated wraparound arm support
Pillow feature	Removable matching throw pillow for adjustable lumbar support
Cleaning compatibility	Wipe-clean faux leather surface suitable for spot cleaning with mild detergent
Stacking capability	Non-stackable fixed upholstered structure
Floor protection	Included non-slip foot pads prevent hard floor scratching and reduce movement
Color option availability	Two-tone beige and teal finish with contrast piping
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential living room use	Suitable as standalone accent seating for living rooms or reading nooks
Office reception area use	Appropriate for guest seating in reception zones or waiting lounges
Bedroom vanity seating use	Suitable for bedroom dressing areas with upright comfortable posture
Hotel lounge common area use	Ideal for boutique hotel public areas and casual breakout spaces
Retail showroom display use	Suitable for furniture showroom or boutique customer seating
Small apartment space use	Optimized for compact urban homes with narrow floor footprint
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Furniture strength recommendation	EN 12520:2015 Furniture strength, durability and safety for domestic seating
Upholstery emission recommendation	EN 1021:2014 Upholstered furniture ignitability for cigarette smolder resistance
Surface finish recommendation	EN 12720:2009 Assessment of surface resistance to cold liquids for faux leather finishes

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Upholstered furniture durability recommendation	GB/T 3324General technical requirements for wooden furniture, applicable for structural integrity checks
Upholstery safety recommendation	GB 20400Leather and fur limit of harmful substances, applicable for PU upholstery compliance screening
Furniture stability recommendation	GB/T 10357.2Test of stability for chairs and stools, applicable for tip-over resistance verification

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Upholstered furniture durability recommendation：GB/T 3324General technical requirements for wooden furniture, applicable for structural integrity checks；
2. Upholstery safety recommendation：GB 20400Leather and fur limit of harmful substances, applicable for PU upholstery compliance screening；
3. Furniture stability recommendation：GB/T 10357.2Test of stability for chairs and stools, applicable for tip-over resistance verification；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · AC-BRL-024-BGTE

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · AC-BRL-024-BGTE

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · AC-BRL-024-BGTE打开导出工具

页面快速操作

发布采购询价

产品描述

The JUESHANGDA Two-Tone Beige Teal Quilted Barrel Accent Armchair, model AC-BRL-024-BGTE, presents a sleek, modern barrel-style silhouette defined by deliberate two-tone upholstery that balances soft neutrality with bold accent detailing. Its smoothly curved, wraparound form frames a generously proportioned seat, with integrated armrests rising gently from the seat base to create an enclosed, inviting seating profile. Contrast teal faux leather piping traces every upholstery seam to sharpen visual definition, while the back panel features precise diamond quilted stitching in rich teal to create a textured focal point against the light beige main upholstery. A matching square removable throw pillow rests against the backrest to complete the polished, curated look. Built for long-term regular use, the chair’s internal frame is constructed from thick solid and engineered wood composite, with elastic webbing suspension under the seat to support padded layers. The main upholstery uses smooth, 0.8mm thick light beige PU faux leather, paired with the quilted teal PU faux leather back panel for tactile and visual contrast. The seat is padded with high-density polyurethane foam wrapped in soft polyester fiber, topped with a thick seat cushion and layered backrest padding for consistent, even support. It stands on four tapered matte black powder-coated iron legs arranged in a fixed splayed four-point base, each fitted with a non-slip plastic foot pad to protect hard flooring and reduce unwanted shifting. The matching throw pillow is filled with plush polyester fiber, and all upholstered surfaces wipe clean easily for simple maintenance with mild detergent and spot cleaning. The chair does not swivel or recline, supporting a relaxed upright casual seating posture ideal for short to medium-length stays. It requires partial assembly upon delivery, with only leg attachment needed using included hardware. This armchair fits seamlessly across both residential and commercial settings. In homes, it works as standalone accent seating in living rooms, a dedicated seat for cozy reading nooks, a comfortable vanity seat in bedrooms, or a space-efficient seating solution for compact small apartments. For commercial spaces, it serves as polished guest seating in office reception areas and waiting lounges, a stylish furnishing for boutique hotel common areas and casual breakout zones, or welcoming customer seating in retail showrooms and independent boutiques. Procurement teams should note the chair ships across two cartons per set, with straightforward assembly that takes roughly 40 minutes per unit to complete. The fixed non-stackable structure requires dedicated storage and display space, while its narrow floor footprint supports flexible placement even in space-constrained areas. The durable wipe-clean upholstery reduces ongoing upkeep demands for high-traffic commercial environments, and the included floor protection pads eliminate the need for separate aftermarket floor protectors for hard surface flooring.

Two-Tone Beige Teal Quilted Barrel Accent Armchair Specifications

供应商与现货