The Swivel Upholstered Lounge Chair with Headrest (model LC-SW-001) balances modern streamlined form with intentional comfort for casual seating across residential and light commercial settings. Visually, the chair features a continuous, curved silhouette that integrates seat, back, armrests, and fixed angled headrest into a single cohesive upholstered form, mounted atop a low-profile 4-prong black metal star base that delivers a clean, unobtrusive profile without bulky exposed hardware. Its matte faux leather upholstery is stitched with reinforced polyester thread at consistent 8mm seam pitch for a polished, tailored finish that complements contemporary interior palettes. Construction centers on a 15mm thick molded plywood inner seat shell paired with a 14mm bent plywood internal support board for stable underlying structure. The seat holds 120mm thick high-resilience polyurethane foam at 35kg/m³ density, paired with 100mm thick medium-density 28kg/m³ back foam, all wrapped in 1.2mm thick matte faux leather. The base is fabricated from 2mm thick powder-coated black steel, fitted with a 2.5mm thick steel central swivel plate that enables full 360-degree horizontal rotation without rocking or tilt lock function, supported by non-slip rubber foot pads under each prong. Performance ratings confirm a static weight capacity of 150kg, with a recommended maximum user weight of 120kg, and a swivel cycle rating of 12000 cycles for durable long-term use. Key functional features include a fixed 110-degree reclined backrest optimized for relaxed posture, with an integrated angled headrest positioned to support the cervical spine when seated in a laid-back position. Curved integrated armrests extend seamlessly from the seat shell to hold forearms at a natural relaxed 90-degree elbow angle, while the non-slip rubber foot pads prevent floor scratching and reduce movement noise during swiveling or repositioning. The chair requires minor assembly, with included hardware to attach the four base legs to the central swivel column, with a reference assembly time of 40 minutes per unit. This lounge chair is well suited for placement in residential living rooms alongside sofas or windows for reading and relaxation, bedroom relaxation corners for dressing or quiet leisure, home office lounge zones for short work breaks, boutique commercial waiting areas in cafes or salons, and boutique hotel guest rooms as supplemental leisure seating. Procurement teams should note each unit ships across two cartons, with an indicated loading capacity of 135 sets per 20GP container at 85% space utilization to support bulk order planning. Clear width between armrests measures 540mm, with a finished seat cushion thickness of 90mm and 70mm backrest padding thickness, to confirm fit for intended space layouts and user needs.