This unbranded upholstered accent armchair, model AC-STRAP-MUS-780, features a mixed-material design anchored by a warm mustard yellow woven polyester upholstery for the seat and back, paired with taupe brown faux leather outer arm side panels accented by a matching faux leather strap with metal buckle detail. Integrated curved armrests are formed by the wrapped backrest side panels, supported by a fixed four-point base of tapered, splayed powder-coated black metal legs, creating a structured, contemporary silhouette suited to intentional accent placement. The chair’s internal structure relies on an 18mm thick engineered plywood frame with a 14mm bent plywood seat support board, built to hold a static load of 125kg. Seat and back cushions use high-density polyurethane foam with a Dacron wrap, with 40kg/m³ density seat foam offering 65% rebound at 120mm thickness, and upholstery tested to 30000 Martindale abrasion cycles for regular use. Reinforced 30mm stitch pitch polyester thread secures all seams, while non-marking polyethylene glides fitted to leg bases prevent hard floor scratching and reduce movement noise. Each floor glide supports an 80kg static load per leg. The tight, fixed seat and back cushions are paired with one matching lumbar pillow, and the fixed base offers no swivel or recline function, with a 125° seated angle supported by three suggested lock positions. A 30mm under-seat clearance allows access for standard vacuum cleaning. Knockdown leg attachment uses included hardware and requires no special tools, with a reference assembly time of 40 minutes per set. Ideal placement includes residential living room lounge zones, reading nooks, or sofa-side positions; office reception lobbies, executive lounges, or casual meeting spaces; boutique hotel guest room window or desk-side seating; furniture showroom staging displays; and small home office visitor seating paired with 2.4m executive desks. Procurement teams should note units ship as one set across two cartons, with a reference packaged gross weight of 23kg per set and reference carton volume of 0.26m³ per set. Key dimensional specifications include an overall footprint of 750 x 820 x 880mm, 460mm seat height from the floor, 580mm seat width between arms, 540mm seat depth, 420mm backrest height from the seat, 625mm armrest height from the floor, and 250mm leg height from the floor to the seat frame, to confirm fit for intended installation spaces.