纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	510 × 400 × 660 mm
Tapered leg height	100 mm
Individual drawer front height	240 mm
Left side panel thickness	18 mm
Drawer internal usable dimensions	450 x 340 x 104 mm
Tabletop thickness	25 mm
Undercabinet floor clearance	100 mm
Drawer gap between front panels	3 mm
Frame rail width (front/side)	30 mm
Side Rail Thickness	40 mm
Slat Spacing	80 mm
Center Support Leg Count	Recommended 6legs

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Static tabletop load capacity	36 kg
Total storage volume	31.8 L
Recommended maximum user weight for edge seating	80 kg
Drawer slide cycle durability	30000 open/close cycles
Surface finish abrasion resistance	2000 cycles
Bed Static Load Reference	400 kg
Per-slat Load Reference	60 kg
Recommended Procurement Warranty	Frame 10 years; hardware 5 years; upholstery 2 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop surface	Light oak wood veneer or solid oak, matte clear lacquer finish
Left side panel	Fluted vertical-grooved light oak-toned wood panel, 18mm thick
Structural frame (top/bottom/right rails)	Solid oak or oak-veneer engineered wood, 30mm wide
Drawer fronts	MDF or engineered wood core, matte white PU paint finish
Support legs	Solid tapered oak wood legs, 40mm top diameter, rounded foot
Drawer box construction	12mm thick plywood or MDF drawer sides, smooth internal finish
Drawer slides	3-section side-mounted cold-rolled steel slides, zinc-plated finish
Back panel	3mm thick hardboard or MDF back panel, fixed with staples
Slat Thickness	15 mm bent plywood or solid timber
Primary Connector Specification	Reference M8-M10 bolts with at least 2 fixing points per corner
Reference Finish / Color Count	Recommended 6timber/upholstery options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Drawer operation	Handleless push-to-open or recessed-grip drawers, full 3/4 extension travel
Storage configuration	Two equal-height stacked drawers for enclosed bedside item storage
Surface utility	Flat level tabletop for placing lamps, phones, books or small decor items
Floor access	100mm under-unit clearance allows robotic vacuum cleaning beneath the unit
Anti-tip safety	Included wall anchor hardware secures unit to wall to prevent tipping
Drawer alignment	Adjustable slide mounting screws allow 2mm front alignment adjustment
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2300× 900× 450 mm/carton in 4 cartons
Reference Packaged Gross Weight	130 kg/set
Reference Packaging Volume	0.9 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential bedroom bedside placement	Positioned adjacent to single, double or queen size beds for nightly essentials access
Small living room end table use	Placed next to sofas or armchairs for remote, drink and small item storage
Narrow entryway console use	Positioned in small entryways for keys, mail and entry accessory storage
Scandinavian/Japanese minimalist interiors	Matches light wood and white color palettes with clean, handleless lines
Youth or guest bedroom furnishing	Compact size and enclosed storage suit smaller secondary bedrooms

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 14749:2016	Safety and strength requirements for domestic storage furniture, applicable for structural validation
EN 71-3:2019+A1:2021	Migration of certain elements in furniture surfaces, required for child-safe bedroom use
EN 12521:2015	Strength, durability and safety requirements for domestic seating and storage furniture

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for dimensional and structural acceptance
GB 18584-2001	Limit of harmful substances in wooden furniture, required for indoor air quality compliance
GB/T 4893.4-2013	Surface wear resistance test for furniture finishes, applicable for finish durability verification

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable for dimensional and structural acceptance；
2. GB 18584-2001：Limit of harmful substances in wooden furniture, required for indoor air quality compliance；
3. GB/T 4893.4-2013：Surface wear resistance test for furniture finishes, applicable for finish durability verification；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · NT-2DW-FL-OAKW-001

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · NT-2DW-FL-OAKW-001

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · NT-2DW-FL-OAKW-001打开导出工具

页面快速操作

发布采购询价

产品描述

The Light Oak-Finish Two-Drawer Fluted Bedside Nightstand, model NT-2DW-FL-OAKW-001, is an unbranded storage piece aligned with Nordic and minimalist Japanese and Scandinavian design sensibilities. It features a balanced two-tone visual profile, pairing warm light oak-toned framing and legs with crisp matte white drawer fronts, while vertical fluted texture on the side panels adds subtle tactile depth without disrupting clean, handleless lines. The unit sits on raised, tapered solid oak legs that create an open, elevated silhouette, with a uniform 3mm gap between the two stacked equal-height drawer fronts for a polished, intentional layout. It measures 510 x 400 x 660 mm overall, with a 25mm thick tabletop finished in matte clear lacquer over light oak wood veneer or solid oak. Its structural frame uses 30mm wide solid oak or oak-veneer engineered wood rails, paired with an 18mm thick fluted side panel, 12mm thick plywood or MDF drawer boxes with smooth internal finishes, zinc-plated 3-section cold-rolled steel side-mounted drawer slides, a 3mm hardboard or MDF stapled back panel, and rounded-foot tapered oak legs with a 40mm top diameter. The nightstand delivers targeted practical function for daily use. The flat, level tabletop supports a 36kg static load for holding lamps, phones, books, or small decor, while the two enclosed drawers offer 31.8L of total usable storage, with internal dimensions of 450 x 340 x 104 mm per drawer. Drawers operate via push-to-open or recessed-grip access with 3/4 extension travel, and adjustable slide mounting screws allow 2mm of front alignment adjustment to maintain a seamless facade; the slides are rated for 30000 open/close cycles, with surface finishes resisting abrasion through 2000 cycles. A 100mm under-unit clearance lets robotic vacuums clean beneath the piece, included wall anchor hardware prevents tipping, the edge supports up to 80kg for temporary seating, and main joints accommodate 5 controlled assembly cycles. This piece fits a range of spaces: it works as a bedside table adjacent to single, double, or queen size beds in primary, youth, or guest bedrooms, as a compact end table next to sofas or armchairs in small living rooms, or as a narrow console in tight entryways for keys and mail, perfectly complementing interiors built around light wood and white palettes. For procurement, note that each set ships across 2 cartons (with reference packaging specs noting a 0.9 m³ total volume and 130kg gross weight), requires 40 minutes of assembly time, and does not carry third-party brand certifications. Confirm material composition matches project needs, as core components may use veneered engineered wood or MDF with PU paint finishes alongside solid wood elements.

Light Oak-Finish Two-Drawer Fluted Bedside Nightstand Specifications

供应商与现货