纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

Overall dimensions	1200 x 650 x 580 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Product net weight	42 kg
Tabletop distributed static load	80 kg
Lower shelf distributed static load	25 kg
Kettle tray point load	10 kg
Recommended users	4 persons
Frame lateral stability rating	level 2 commercial tea-room use
Stone surface heat-resistance target	80 degrees C continuous contact
Metal coating salt-spray acceptance target	48 hours
Door and drawer cycle count	0 cycles
Reference Static Load	150 kg depending on category

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop	18 mm white engineered stone or sintered-stone-composite panel with grey veining and eased edge
Load-bearing frame	40 mm black powder-coated square steel tubes forming four legs, side rails and lower stretchers
Lower shelf	Black glossy tempered-glass or black laminated glass panel set within the metal frame
Kettle station	Brushed stainless steel electric kettle and lidded sterilizer pot on a black heat-resistant tray
Drain fitting	Metal square drain grate with a flexible waste hose connected to the removable bucket
Wastewater container	Red removable plastic bucket with handle and lid for tea-water drainage

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Tea-water drainage	Central metal grate and flexible hose drain wastewater directly into the removable red bucket under the table
Integrated kettle placement	Rear-right recessed tray locates the electric kettle and sterilizer pot while preserving front serving space
Open equipment bay	The right under-top bay accommodates the bucket and power cord, with no door blocking daily removal
Lower storage shelf	Full-width black shelf provides storage for tea trays, cups, filters or supplementary water containers

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Main carton dimensions	1280 x 720 x 220 mm
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Tea room or reception lounge	Suits four-person tea service where the drain, kettle and lower shelf reduce countertop clutter
Office hospitality area	Appropriate for visitor waiting zones and manager meeting rooms requiring a low table for hot drinks and display

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Furniture safety and strength	EN 15372 applicable to strength, durability and stability requirements for non-domestic tables
Surface flammability	EN 1021cigarette ignition test applicable if upholstered seating is supplied with the table
Electrical household appliance safety	EN 60335applicable to the electric kettle and sterilizer power assembly

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Furniture dimensional fitness	GB/T 3324 general technical specification for wooden furniture, applicable to dimensional and workmanship acceptance of the finished table
Furniture surface inspection	GB/T 4893.1 to GB/T 4893.9 applicable to surface resistance and finish performance checks for the stone-look top
Formaldehyde emission	GB 18580 applicable if wood-based panels are used in the substrate or supporting board
Electrical appliance safety	GB 4706.1 applicable to the separately supplied electric kettle together with the relevant special requirements

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Furniture dimensional fitness：GB/T 3324 general technical specification for wooden furniture, applicable to dimensional and workmanship acceptance of the finished table；
2. Furniture surface inspection：GB/T 4893.1 to GB/T 4893.9 applicable to surface resistance and finish performance checks for the stone-look top；
3. Formaldehyde emission：GB 18580 applicable if wood-based panels are used in the substrate or supporting board；
4. Electrical appliance safety：GB 4706.1 applicable to the separately supplied electric kettle together with the relevant special requirements；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CTT-W1200-MK01

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CTT-W1200-MK01

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CTT-W1200-MK01打开导出工具

页面快速操作

发布采购询价

产品描述

This unbranded rectangular tea table, model CTT-W1200-MK01, combines a serving surface with a purpose-built tea-making station. The white engineered stone or sintered-stone-composite top carries subtle grey veining and an eased edge, presenting a marble-style appearance against a black metal framework. Its 1200 x 650 x 580 mm footprint and 580 mm height create a low, broad profile intended for four-person service. At the rear right, a recessed black heat-resistant tray holds a brushed stainless steel electric kettle and a lidded sterilizer pot, keeping brewing equipment organized while preserving the front area for cups, teaware, and serving. A central square metal grate and flexible hose direct wastewater into a removable red plastic bucket with a handle and lid, concealed in the open right-side under-top bay where the power cord can also be managed. Because the bay has no door, the bucket can be lifted out quickly for emptying and cleaning. The frame is built from 40 mm black powder-coated square steel tubes, forming four open legs, side rails, and lower stretchers. A full-width lower shelf in black glossy tempered glass or black laminated glass sits within the frame, offering visible storage for tea trays, cups, filters, or supplementary water containers. The table has a net weight of 42 kg and rated distributed static loads of 80 kg on the tabletop and 25 kg on the lower shelf; the kettle tray is rated for a 10 kg point load. The stone surface is targeted for continuous heat contact at 80 degrees C, and the frame carries a level 2 lateral stability rating for commercial tea-room use. These attributes make the table suitable for dedicated tea rooms, reception lounges, office hospitality areas, visitor waiting zones, and manager meeting rooms where a coordinated hot-drink station reduces countertop clutter. Procurement planning should account for delivery as one set in two cartons, packaged gross weight of 120 kg, 0.8 cubic meter packaging volume, and an assembly reference time of 40 minutes per set. Buyers should also verify local electrical requirements for the kettle assembly and plan routine access to the wastewater bucket, shelf cleaning, and the 5 mm operating clearance around moving or hardware-related parts.

Tea Table with White Marble-Style Top, Black Metal Frame and Integrated Kettle Station Specifications

供应商与现货