纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	730 × 720 × 1280 mm
Seat width	520 mm
Seat depth	533 mm
Seat height adjustment range	540 mm
Backrest height	700 mm
Armrest height from floor	730 mm
Five-star base diameter	686 mm
Caster wheel diameter	60 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Product net weight	28 kg
Recommended user weight capacity	159 kg
Seat cushion foam density	45 kg/m³
Seat cushion foam thickness	80 mm
Backrest foam thickness	60 mm
Five-star base static load rating	1134 kg
Caster rolling durability	40000 cycles
Backrest foam density	38 kg/m³
Gas lift dynamic load rating	150 kg
Tilt mechanism cycle durability	120000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat and back upholstery	Black smooth grain upholstery, button tufted on headrest and mid-back
Side panels and arm support frames	Dark walnut finish bent plywood, curved continuous profile from headrest to arm base
Seat support board	12 mm thick high-density plywood, secured to tilt mechanism with steel mounting plates
Backrest support panel	12 mm thick bent plywood, shaped to ergonomic reclined curve
Internal frame	1.5 mm thick steel reinforcement frame connecting seat, back, and mechanism
Five-star base	Wood-finish solid engineered wood legs with central steel hub for gas cylinder attachment
Armrest pads	Black padded upholstered surface matching seat material, mounted on wood arm supports
Gas lift cylinder	Class 3 chromed steel pneumatic cylinder, 100 mm stroke
Caster wheels	Black hooded polyurethane dual casters, non-marking hard floor compatible
Seam stitching	30 mm stitch pitch on upholstery seams, matched thread color
Internal reinforcement frame	1.5 mm thick square steel tube frame connecting seat, back, and tilt mechanism, powder coated black
Tilt chassis	3 mm thick stamped steel butterfly tilt mechanism, black powder coated finish

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

360-degree swivel rotation	Full 360° horizontal rotation enabled by central swivel bearing between seat and gas lift
Pneumatic seat height adjustment	100 mm vertical travel via Class 3 gas lift, activated by side lever under seat
Tilt recline function	15° maximum backward recline angle from upright seating position
Tilt tension adjustment	User-adjustable recline resistance knob under seat, calibrated for user weight between 160 kg
Upright tilt lock	Single position lock securing chair in fully upright position for focused desk work
Smooth rolling mobility	Dual PU casters roll freely on hard wood, tile, and low-pile carpet floors with 360° caster swivel
Integrated head and neck support	Tufted upper back headrest section aligned to support cervical spine when seated upright or slightly reclined
Fixed curved lumbar support	Shaped mid-back padding and bent wood panel providing fixed lumbar contour aligned to natural lower back curve
Fixed arm support	Curved upholstered armrests fixed at 230 mm above seat surface, aligned to support forearms during typing and desk work
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Packaging configuration	1 chair per knocked-down export carton
Carton dimensions	980 x 680 x 630 mm
Gross weight per carton	28 kg
Packaging volume per unit	0.42 CBM
Assembly time	50 minutes
20GP container load quantity	120 units
Packaging materials	5-layer double-corrugated export carton, EPS foam edge protection, polyethylene bag wrap, hardware kit with assembly instructions
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Private executive offices	Traditional formal aesthetic with wood trim and tufted upholstery matches C-suite and management office environments, projecting a professional classic appearance
Home office studies	Plush padding and classic styling complement traditional home office decor, providing desk-appropriate support for remote work
Formal conference room seating	High-back design provides formal seating for boardrooms and high-level meeting spaces, supporting upright posture during 2+ hour meetings
Law and financial professional offices	Conservative dark wood and black upholstery matches formal professional office decor for client-facing spaces
Standard desk height compatibility	Adjustable seat height range works with 760 mm standard office desks, maintaining proper arm and leg clearance
Hard floor and low-pile carpet environments	PU non-marking casters are suitable for wood, tile, and commercial carpet without requiring separate chair mats
Executive reception areas	Formal silhouette provides dignified guest seating for executive reception and waiting areas adjacent to leadership offices
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 1335-1:2020	Office work chair dimensional safety standards, verifying seat, back, and arm dimensions align with ergonomic desk use requirements
EN 1335-2:2018	Office chair safety requirements covering structural strength, stability, and mechanical component durability for commercial use
EN 1335-3:2009	Office chair test methods defining procedures to verify load capacity, caster durability, and mechanism cycle performance

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.1-2017	Standard for office chairs, defining static load, impact, cyclic durability, and stability tests for general-purpose office seating, applicable to base, mechanism, and cylinder verification
ANSI/BIFMA X5.11-2015	Standard for big and tall office chairs, optional extended load rating reference for higher weight capacity variants of this executive chair model

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to wood bent panel components and five-star wood base, verifying structural stability and finish quality
GB/T 16799-2008	Leather and artificial leather for furniture, applicable to upholstery material testing for abrasion resistance, color fastness, and flexibility
GB 28007-2011	Safety and performance requirements for office chairs, specifying static load, stability, and durability testing criteria for structural components
GB/T 39604-2020	Furniture hardware - Gas springs for seating, applicable to pneumatic lift cylinder safety and cycle performance verification

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to wood bent panel components and five-star wood base, verifying structural stability and finish quality；
2. GB/T 16799-2008：Leather and artificial leather for furniture, applicable to upholstery material testing for abrasion resistance, color fastness, and flexibility；
3. GB 28007-2011：Safety and performance requirements for office chairs, specifying static load, stability, and durability testing criteria for structural components；
4. GB/T 39604-2020：Furniture hardware - Gas springs for seating, applicable to pneumatic lift cylinder safety and cycle performance verification；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · EXEC-TB-001

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · EXEC-TB-001

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · EXEC-TB-001打开导出工具

页面快速操作

发布采购询价

产品描述

This unbranded model EXEC-TB-001 executive office chair features a formal, traditional silhouette defined by a tall tufted high back, dark walnut-finish bent wood side panels that curve continuously from the integrated headrest down to the arm supports, and a matching wood five-star swivel base fitted with black rolling casters. The black smooth-grain upholstery is accented with button tufting across the headrest and mid-back, paired with color-matched stitching for a polished, cohesive look. Its structure is built around a powder-coated steel internal reinforcement frame connected to thick bent plywood support panels for the seat and back, with a stamped steel butterfly tilt mechanism and Class 3 chromed steel pneumatic gas lift at its core. Padded surfaces use high-density molded foam for the seat and medium-high density foam for the back, creating plush, shape-retaining support across the seat, back, and curved fixed armrests. The wood five-star base features a central steel hub for secure gas lift attachment, and non-marking polyurethane dual casters support smooth, multidirectional movement. Functional design supports extended daily office use, with full 360-degree swivel, pneumatic seat height adjustment aligned to standard office desk heights, a maximum backward recline with user-adjustable tilt tension, an upright lock for focused work, and integrated fixed head/neck and lumbar support that follows the natural curve of the spine. The fixed upholstered armrests sit at a height aligned to support forearms during typing and desk-based tasks. This chair suits a range of formal commercial and residential spaces, including private C-suite and management offices, law and financial professional client-facing spaces, formal boardrooms and conference rooms, executive reception waiting areas, and traditional home office studies. It performs reliably on hard flooring including wood and tile, as well as low-pile commercial carpet, without requiring separate chair mats. For procurement planning, note that the chair ships in knocked-down export packaging with protective foam, wrap, and a full hardware and instruction kit. The upholstery’s exact material composition requires supplier bill of materials confirmation prior to bulk order, and teams should allocate appropriate time for on-site assembly. The product’s weight capacity and component durability ratings align with heavy-duty commercial office use, and freight calculations can reference the provided packaging volume and container load s to coordinate bulk shipping efficiently.

Black Tufted High-Back Executive Office Chair with Bent Wood Side Panels Specifications

供应商与现货