纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	800 × 800 × 750 mm
Table leg spread diameter	720 mm
Table top thickness	25 mm
Table under-table knee clearance height	700 mm
Chair overall height range	880 mm
Chair seat width	480 mm
Chair seat depth	450 mm
Chair seat height range	500 mm
Backrest height above seat	420 mm
Chair base diameter	600 mm
Gas lift outer column diameter	50 mm
Chair overall maximum height	880 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Table static load capacity	100 kg
Table net weight	18 kg
Set recommended seating capacity	4 people
Gas lift height adjustment stroke	100 mm
Chair swivel rotation angle	360 degrees
Chair swivel rotation range	360 degrees
Table leg floor contact point slip resistance	0.6 friction coefficient
Chair upholstery abrasion resistance	50000 Martindale cycles
Foam padding compression set	10%
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Table top	18mm MDF core with natural oak veneer, 25mm thick solid beech edge banding, matte clear lacquer finish
Table legs and support crossbar	Solid beech wood, natural clear matte lacquer finish, angled four-leg structure with central cross bracing
Chair outer shell	12mm thick bent plywood with natural oak veneer, matte clear lacquer finish, curved wrap-around back and seat side support
Chair seat and back upholstery	1.2mm thick smooth PU leather, 40mm thick high-density foam padding (35kg/m³ density, 40% rebound rate), stitched edge detail
Chair gas lift column	Chrome-plated steel outer tube, black height adjustment lever located under seat right side
Chair four-star base	2.0mm thick polished chrome-plated steel, non-tilting fixed structure, black anti-slip rubber foot pads at each leg end
Seam construction	10 stitches per 100mm reinforced stitching along upholstery edges
Table legs and support structure	Solid beech wood, natural matte clear lacquer finish, four angled legs connected by central cross-brace for structural rigidity
Chair outer bentwood shell	12mm thick bent plywood with natural oak veneer, matte clear lacquer finish, integrated curved wrap-around back and seat side support
Upholstery seam construction	10 stitches per 100mm reinforced polyester stitching along all upholstery edges
Chair lower seat support	1.5mm thick powder-coated steel mounting plate connecting seat shell to gas lift column
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Chair height adjustment	Pneumatic gas lift operated by side lever, adjusts seat height between 400mm and 500mm, locks at any height within stroke
Chair swivel function	Full 360-degree horizontal rotation around central column, no tilt or recline function for fixed upright posture
Table surface function	Smooth round top with rounded edges to reduce impact injury, provides stable surface for drinks, documents and small decor items during meetings
Chair stability design	Four-star base with rubber foot pads distributes weight evenly, prevents tipping during normal use, no rolling casters for fixed placement reception areas
Assembly structure	Table legs attach to central cross brace with knock-down hardware, chair bases attach to gas lift with standard friction fit, requires basic household tools for assembly
Surface maintenance	Lacquered wood surfaces and PU upholstery can be wiped clean with mild detergent and soft cloth, no special maintenance required for daily use
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Total number of shipping cartons for full set (1 table + 4 chairs)	5 cartons
Table shipping carton dimensions	850 x 850 x 120 mm
Per-chair shipping carton dimensions	650 x 620 x 480 mm
Total set gross shipping weight	80 kg
Total set shipping volume (CBM)	0.41 m³
Assembly time for full set	60 minutes
20ft GP container loading quantity (full sets)	72 sets
40ft HQ container loading quantity (full sets)	175 sets
Total shipping cartons per full set (1 table + 4 chairs)	5 cartons
Total set shipping volume	0.41 m³

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Office reception and waiting areas	Suitable for corporate lobbies, front waiting zones, providing 4-person seating with compact round table for guest use
Casual meeting and breakout spaces	Suitable for office breakout areas, informal team discussion zones, supporting short meetings of up to 4 attendees
Cafe and lounge seating	Suitable for independent cafes, hotel lounge areas, co-working common spaces, providing durable easy-to-clean seating for patrons
Residential dining nooks and home offices	Suitable for small apartment dining areas, home office guest seating, matching modern Scandinavian or mid-century modern interior styles
Color option availability	Available in black PU and white PU upholstery colors to match different interior design schemes
Corporate reception and waiting areas	Suitable for office lobbies, front desk waiting zones, providing 4-person seating with compact round table for guest beverage and document placement, 800mm table size fits small footprints without blocking pedestrian traffic
Office casual meeting and breakout spaces	Suitable for team breakout zones, informal discussion areas, supporting short 4-person meetings with upright chair posture that maintains focused conversation without recline
Co-working space common areas	Suitable for co-working lounge zones, open plan common seating, with durable easy-to-clean PU upholstery and lacquered wood surfaces that resist frequent use and spills

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 15372:2016	Furniture - Strength, durability and safety requirements for non-domestic tables, applicable for table load and stability performance verification
EN 16139:2013	Furniture - Strength, durability and safety requirements for non-domestic seating, applicable for chair structural performance verification
EN 1021-1:2014	Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette, applicable for fire safety verification of chair upholstery

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

北美市场选型与验收参考	ANSI/BIFMA X5.4 公共及休闲座椅

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for dimensional tolerance, surface finish quality and structural stability verification of table and chair wood components
GB/T 28007-2011	General technical requirements for office chairs, applicable for chair stability, strength and durability performance verification
GB 18584-2001	Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, applicable for formaldehyde and heavy metal emission verification of wood components

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable for dimensional tolerance, surface finish quality and structural stability verification of table and chair wood components；
2. GB/T 28007-2011：General technical requirements for office chairs, applicable for chair stability, strength and durability performance verification；
3. GB 18584-2001：Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, applicable for formaldehyde and heavy metal emission verification of wood components；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · SET-K148-1706C

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · SET-K148-1706C

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · SET-K148-1706C打开导出工具

页面快速操作

发布采购询价

产品描述

This reception lounge furniture set (model SET-K1706C) is an unbranded coordinated collection pairing one round coffee table with four height-adjustable bentwood upholstered swivel reception chairs, designed for cohesive, functional guest seating across commercial and residential settings.
Visually, the set balances warm wood finishes and polished metallic accents for a streamlined, modern profile. The round table features a smooth circular top with softly rounded edges, supported by four angled solid beech legs connected by a central cross brace, finished in a matte clear lacquer that highlights natural wood grain. Each chair uses a curved wrap-around bentwood shell finished to match the table’s oak veneer tone, paired with smooth PU leather upholstery, a polished chrome-plated steel four-star base, and a matching chrome gas lift column for a cohesive, understated aesthetic that aligns with Scandinavian and mid-century modern design palettes; upholstery is available in black or white to suit varied interior schemes.
Construction combines durable, low-maintenance materials selected for high-frequency use. The table top uses an MDF core with natural oak veneer and solid beech edge banding, with legs crafted from solid beech wood for structural rigidity. Each chair’s outer shell is formed from thick bent plywood with oak veneer, supporting padded seat and back sections wrapped in reinforced stitched PU leather over high-density foam, with a contoured lumbar support zone for comfortable upright seating. Chair components include a chrome-plated steel gas lift column, thick polished chrome four-star base fitted with anti-slip rubber foot pads to prevent floor scuffing and slippage, and a powder-coated steel mounting plate to connect the seat structure to the base.
Functional details support flexible, user-friendly operation. The table’s rounded edge design reduces impact injury risk, and its smooth, non-porous surface provides stable space for drinks, documents, and small decor items, with ample under-table knee clearance for comfortable seating. Each chair offers pneumatic height adjustment via a side-mounted lever, locking at any position within its adjustment stroke, and supports full 360-degree horizontal rotation without tilt or recline to maintain an upright posture ideal for conversation. All lacquered wood and PU upholstery surfaces wipe clean easily with mild detergent and a soft cloth, requiring no specialized daily maintenance. The set ships in flat-pack knock-down construction across five cartons, requiring basic household tools and an hour for two people to assemble fully.
The set is sized to seat four people comfortably, fitting compact footprints without obstructing pedestrian flow. It is well-suited for corporate reception lobbies and front-desk waiting zones, office breakout areas for informal team discussions, co-working common spaces, independent cafes and hotel lounges, as well as small residential dining nooks and home office guest seating. When procuring this set, note that upholstery color selection should align with existing interior finishes, and confirm shipping and delivery details align with receiving space capacity. The set’s knock-down packaging supports efficient freight loading for bulk commercial orders, and the fixed, caster-free chair bases make it ideal for spaces where stationary guest seating is preferred.

1 Round Wood Coffee Table + 4 Height-Adjustable Bentwood Upholstered Swivel Reception Chairs Set Specifications

供应商与现货