纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1800 × 900 × 750 mm
Tabletop thickness	38 mm
Tabletop overhang (front/back)	80 mm
Tabletop overhang (left/right ends)	120 mm
Leg assembly footprint width	720 mm
Leg assembly footprint depth	680 mm
Metal leg section width	50 mm
Floor clearance from table underside	712 mm
Leg glide diameter	20 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net product weight	52 kg
Static uniform tabletop load capacity	150 kg
Point load per leg assembly	80 kg
Seating capacity	6 people
Vertical leg static load resistance	1200 kg
Surface abrasion resistance	2000 cycles
Suggested warranty period	3 years
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop substrate	38mm thick high-density MDF board
Tabletop surface finish	Walnut wood veneer with matte polyurethane seal
Tabletop edge treatment	Matched wood veneer edge banding with eased 2mm radius
Support leg material	2mm thick cold-rolled steel plate
Leg surface finish	Matt black electrostatic powder coating
Weld points	Full penetration welded joints at leg intersections
Foot glides	Injection-molded black non-marking PP plastic with anti-slip base
Joint hardware	M8 steel mounting bolts with locking washers
Welded joints	Full penetration welded joints at all leg intersection points
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Fixed rigid structure	Fully assembled leg frames bolt permanently to tabletop underside with no folding or height adjustment, intended for permanent stationary placement
Floor protection	Each leg terminates in a soft non-scuff glide that prevents scratching on wood, tile, and polished stone flooring, with 2mm height adjustment tolerance for uneven surfaces
Seated knee clearance	712mm vertical clearance under the full central span of the table, accommodating standard dining chair seat heights up to 480mm without leg obstruction
Structural stability	Dual X-form leg assemblies distribute weight across 6 contact points (3 legs per support set) to reduce wobble on slightly uneven floors
Surface utility	Matte sealed tabletop resists everyday liquid spills from food and beverages, suitable for casual dining and home office use without permanent staining under normal use
Knock-down assembly	Tabletop and two leg assemblies ship disassembled for transport, requiring only a hex key to attach legs to pre-installed threaded inserts on the table underside
Fixed stationary structure	Two fully welded X-leg frames bolt permanently to the tabletop underside with 8 M8 bolts, no folding, extension or height adjustment features, intended for permanent stationary placement
Uneven floor adjustment	Each leg terminates in a non-scuff threaded glide that provides 2mm vertical height adjustment tolerance per foot to eliminate wobble on slightly uneven hard flooring
Structural weight distribution	Dual X-form leg assemblies distribute tabletop load across 6 total floor contact points (3 contact points per support set) to reduce lateral wobble and concentrated floor pressure
Spill-resistant surface	Matte polyurethane sealed veneer tabletop resists penetration from everyday cold food and beverage spills, allowing wipe-clean maintenance without permanent staining under normal dining use
Knock-down flat-pack assembly	Tabletop and two pre-welded leg assemblies ship disassembled for transport, requiring only the included 4mm hex key to attach legs to pre-installed threaded inserts, no on-site welding or drilling required
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Number of shipping packages	1
Shipping carton dimensions	1880 x 960 x 120 mm
Gross shipping weight	58 kg
Packaging volume per unit	0.217 CBM
Assembly time per unit	25 minutes
20ft GP container loading quantity	124 units
40ft HQ container loading quantity	306 units
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Domestic dining rooms	Suitable for 6-person household dining spaces 3m x 3.5m or larger, fitting mid-century modern, industrial, and Scandinavian interior styles
Open-plan kitchen and living areas	Low-profile X-leg design maintains visual openness in open-plan spaces, can double as a casual work from home desk when not used for meals
Light commercial hospitality	Suitable for small cafes, boutique hotel breakfast areas, and co-working breakout spaces with daily light use, load rated for regular dining service
Showroom and display use	Neutral walnut and black finish works as a display table in furniture showrooms, retail pop-ups, or gallery spaces for product presentation
Recommended matching seating	Pairs with dining chairs with seat heights between 480 mm, including upholstered dining chairs, wooden spindle chairs, or metal frame industrial style chairs
Showroom and pop-up display use	Neutral walnut and matte black finish works as a product display table in furniture showrooms, retail pop-ups, or gallery spaces for merchandise presentation

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Domestic furniture safety	EN 12521:2015 Furniture - Strength, durability and safety - Requirements for domestic tables
Surface finish performance	EN 15186:2006 Furniture - Test for surface resistance to cold liquids
Metal component finish	EN 10346:2015 Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions
Domestic table safety standard	EN 12521:2015 Furniture - Strength, durability and safety - Requirements for domestic tables
Surface cold liquid resistance	EN 15186:2006 Furniture - Test for surface resistance to cold liquids
Steel substrate material standard	EN 10346:2015 Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

北美市场选型与验收参考	ANSI/BIFMA X5.5 办公桌及桌类产品

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Table mechanical safety	GB/T 3324General technical requirements for wooden furniture
Furniture surface durability	Recommended references: GB/T 4893.8
Formaldehyde emission	Recommended references: GB 18584
Wooden furniture general requirements	GB/T 3324General technical requirements for wooden furniture
Formaldehyde emission limit	Recommended references: GB 18584

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Table mechanical safety：GB/T 3324General technical requirements for wooden furniture；
2. Furniture surface durability：Recommended references: GB/T 4893.8；
3. Formaldehyde emission：Recommended references: GB 18584；
4. Wooden furniture general requirements：GB/T 3324General technical requirements for wooden furniture；
5. Formaldehyde emission limit：Recommended references: GB 18584；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · DT-XM1800

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · DT-XM1800

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · DT-XM1800打开导出工具

页面快速操作

发布采购询价

产品描述

This rectangular dining table presents a balanced mid-century modern silhouette anchored by a warm walnut-effect tabletop and contrasting black X-shaped metal legs. The form follows mainstream mid-century X-leg proportions at standard dining height, with overhangs on all sides that provide comfortable seating access without leg obstruction, while the open X-frame design maintains unbroken visual flow across surrounding spaces. The tabletop features a smooth matte wood-grain finish with eased, veneer-matched edges, paired with seamlessly welded X-form leg assemblies finished in uniform matte black to create a refined, understated aesthetic. Constructed for durable daily use, the table features a high-density MDF tabletop substrate topped with walnut veneer sealed in matte polyurethane, with matching wood veneer edge banding that eliminates sharp corners. The support structure uses thick cold-rolled steel formed into dual fully welded X-leg frames, joined with steel mounting bolts and locking washers for rigid fixed placement. Each leg terminates in non-marking, anti-slip injection-molded plastic glides that protect hard flooring surfaces, with minor vertical adjustment to accommodate slightly uneven floors and reduce wobble. The static load-rated surface resists penetration from everyday food and beverage spills, supporting simple wipe-clean maintenance under normal use. Sized to seat six people, with two guests per long side and one per short end, the table delivers generous central knee clearance for standard-height dining chairs. It ships in knock-down flat-pack configuration, requiring only an included hex key to attach pre-welded leg frames to pre-installed threaded inserts on the table underside, with no on-site drilling or welding required. This table fits seamlessly across both residential and light commercial settings, including domestic dining rooms aligned with mid-century, industrial or Scandinavian interiors, open-plan kitchen and living areas where its open frame preserves sightlines, and multi-use spaces where it can serve as a casual work surface outside of meal times. It is also appropriate for low-traffic hospitality venues such as small cafes, boutique hotel breakfast areas and co-working breakout zones, as well as showroom and pop-up retail displays requiring a neutral, versatile presentation surface. When procuring this model, note the unbranded product designation and cross-verify material specifications, including veneer grade and exact substrate composition, with supplier documentation before bulk ordering. Plan for two-person handling during assembly due to the unit weight, and confirm packaging configurations and assembly timelines to align with project scheduling. The product carries a suggested mid-market warranty suitable for domestic and light commercial use, with matching seating recommended to use chair seat heights that align with the table’s under-table clearance for comfortable use.

Rectangular Walnut-Finish Dining Table with X-Shaped Black Metal Legs Specifications

供应商与现货