纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	8000 × 8000 × 3200 mm
Overall installed footprint	8000 x 8000 x 3200 mm
Vertical central pole cross-section	93 x 93 mm
Horizontal cross beam cross-section	69 x 69 mm
Umbrella rib/arm cross-section	20 x 30 mm
Per-canopy diameter (largest size)	4000 mm
Canopy edge clearance above finished floor	2200 mm
Canopy valence vertical depth	200 mm
Central hub height above finished floor	2800 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total static wind resistance rating (properly secured)	74 km/h
Canopy UV protection rating	UPF 50+
Shade coverage area	64 sqm
Recommended maximum static load per canopy rib	25 kg
Canopy fabric water repellency rating	1000 mm hydrostatic head
Total set gross weight (including stone base)	200 kg
Round weighted base diameter	1000 mm
Reference Static Load	150 kg depending on category
Moving-part Durability Reference	Acceptance target 50000 cycles
Recommended Procurement Warranty	Structure 5 years; hardware 3 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Central vertical pole	Powder-coated 93x93mm aluminum alloy, 2.0mm wall thickness, rust-resistant
Cantilever support arms	Powder-coated 20x30mm aluminum alloy ribs, welded joints, matte finish
Cross support beams	Powder-coated 69x69mm aluminum alloy, 2.5mm wall thickness, rigid bracing
Canopy fabric	280g/sqm solution-dyed coated polyester, PU waterproof backing, UV inhibitor treated
Weighted base	Solid round natural stone composite, matte gray finish, non-slip bottom pad
Mechanical adjustment hardware	304 stainless steel bolts, lock levers, crank mechanism, corrosion-resistant
Hub connector fittings	Die-cast aluminum joint brackets, nylon wear bushings, anti-rotation pins
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints
Reference Finish / Color Count	Recommended 6finish options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Central mast 360° horizontal rotation	Manual crank rotation with 8 lock positions, full perimeter sun tracking
Individual canopy tilt adjustment	45° per-canopy angle adjustment, lever lock, follows daily sun angle
Manual crank open/close mechanism	Per-canopy crank deployment, 10 seconds opening time per canopy, auto-lock when open
Canopy removable for cleaning	Velcro and snap attachment to ribs, machine-washable fabric, replacement compatible
Tool-free base assembly	Segmented stone base, central pole sleeve, no special tools required for setup
Foldable arm storage	Canopies fold vertically against central pole for off-season storage, compact footprint
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Commercial restaurant patio seating	Provides shade for 6four-seat outdoor dining tables, covers large contiguous dining zones
Hotel courtyard and poolside areas	Covers multiple lounge seating groups, durable aluminum frame for high-traffic hospitality use
Outdoor event and exhibition spaces	Freestanding installation without permanent mounting, quick setup for temporary events
Commercial street pedestrian seating	Wind-rated frame suitable for open sidewalk cafe environments, no building attachment required
Resort outdoor dining terraces	Two-tone color option matches landscaped resort design, fade-resistant fabric for long-term outdoor use

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 13561:2015	Applicable scope: external blinds and awnings/umbrellas performance and wind resistance requirements

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 23147-2018	Applicable scope: outdoor leisure sunshade umbrella structural safety and performance requirements
GB 18401-2010 Class C	Applicable scope: textile canopy fabric safety requirements for outdoor decorative products

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 23147-2018：Applicable scope: outdoor leisure sunshade umbrella structural safety and performance requirements；
2. GB 18401-2010 Class C：Applicable scope: textile canopy fabric safety requirements for outdoor decorative products；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · FH-CANT-ALU-4000

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · FH-CANT-ALU-4000

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · FH-CANT-ALU-4000打开导出工具

页面快速操作

发布采购询价

产品描述

The Commercial Four-Head Cantilever Aluminum Patio Umbrella (model FH-CANT-ALU-4000, unbranded) features a symmetrical multi-canopy layout anchored by a single central vertical mast, with four cantilevered canopies extending outward to form an 8000mm by 8000mm installed footprint reaching 3200mm at its highest point. Each canopy measures 4000mm in diameter, with a 200mm vertical valence, 2200mm edge clearance above finished flooring, and a central hub positioned 2800mm above ground, creating a unified 64sqm contiguous shade zone. Its frame is constructed from powder-coated, rust-resistant aluminum alloy: the central pole has a 93x93mm cross-section with 2.0mm wall thickness, cross support beams measure 69x69mm with 2.5mm wall thickness for rigid bracing, and cantilever ribs use 20x30mm sections with welded, matte-finished joints. Hardware includes corrosion-resistant 304 stainless steel bolts, lock levers, and crank mechanisms, paired with die-cast aluminum joint brackets, nylon wear bushings, and anti-rotation pins, with M6 to M10 connectors at major joints. The 280g/sqm solution-dyed polyester canopy features a PU waterproof backing, UV inhibitor treatment, 1000mm hydrostatic head water repellency, and UPF 50+ UV protection. A solid round natural stone composite base with 1000mm diameter, matte gray finish, and non-slip bottom pad anchors the unit, bringing total set weight to 200kg for a 74km/h static wind resistance rating when properly secured. Functional features include manual 360-degree mast rotation with 8 lock positions for full perimeter sun tracking, independent 45-degree tilt adjustment for each canopy with lever locks, and per-canopy crank deployment that opens each unit in 10 seconds with an auto-lock feature. Canopies attach via Velcro and snaps for easy removal and machine washing, the segmented base requires no special tools for assembly, and arms fold vertically against the mast for compact off-season storage. Six finish options are available to match different design schemes. The umbrella is suited for commercial restaurant patios, where it shades six four-seat dining tables; hotel courtyards and poolside areas supporting multiple lounge groups; temporary outdoor events and exhibitions with freestanding, quick setup; open sidewalk cafe seating; and resort dining terraces with fade-resistant fabric for long-term use. For procurement, note units ship as one set across two cartons, with 0.8m³ packaging volume, 120kg packaged weight, and 40-minute assembly time. Each rib supports a maximum 25kg static load, and replacement canopies are compatible for long-term maintenance planning.

Commercial Four-Head Cantilever Aluminum Patio Umbrella Specifications

供应商与现货