纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	600 × 600 × 650 mm
Table top diameter	600 mm
Table top edge thickness	12 mm
Upper pedestal stem diameter at narrowest point	30 mm
Lower pedestal bulb diameter	140 mm
Faceted crystal accent band height	60 mm
Base disc diameter	380 mm
Base disc thickness	10 mm
Under-table floor clearance	600 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Static top load capacity	45 kg
Product net weight	12 kg
Base anti-tip stability load offset	15 kg
Surface scratch resistance rating	2H
Finish corrosion resistance	Pass 48-hour neutral salt spray
Recommended static service life	10 years
Reference Static Load	150 kg depending on category
Moving-part Durability Reference	Acceptance target 50000 cycles
Recommended Procurement Warranty	Structure 5 years; hardware 3 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Table top	8mm thick hammered cast aluminum alloy with silver textured finish
Table top edge trim	2mm thick matte black powder-coated steel rim
Upper pedestal stem	Hammered forged brass-finish aluminum with geometric faceted texture
Lower pedestal bulb upper section	Hammered brass-finish cast metal matching upper stem finish
Pedestal accent band	15mm thick faceted cut lead-free crystal glass with polished edge
Base disc	10mm thick matte black powder-coated carbon steel with polished reflective top surface
Connection hardware	Zinc-plated steel threaded fasteners securing stem, top and base
Base bottom pads	3mm thick non-slip rubber floor protection pads affixed to base underside
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints
Reference Finish / Color Count	Recommended 6finish options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Structure type	Fixed single-central-pedestal freestanding construction with no moving parts
Surface function	Textured non-slip top surface supports drinks, decor and small table lamps
Floor protection	Underside rubber pads prevent scratching hard wood, tile or stone flooring
Assembly requirement	3-piece knock-down assembly connecting top, pedestal and base with included hardware
Placement suitability	Freestanding design fits beside sofas, armchairs or in entryway nooks
Maintenance access	Smooth sealed metal and glass surfaces allow wipe-clean care with soft dry cloth
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Luxury residential living room	Placed beside sofas or armchairs to hold drinks, remotes and decorative objects
High-end hotel lounge areas	Used beside lounge seating in suites or public lobbies for guest convenience
Upscale entryway spaces	Positioned in entry foyers to display floral arrangements or small decor pieces
Boutique retail display areas	Used as product display plinth for small luxury goods in showrooms
Modern bedroom placement	Set beside beds as a designer nightstand for lamps and bedtime essentials
Executive office lounge zones	Placed next to guest seating in private office breakout areas

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Strength, durability and stability requirements for domestic tables
EN 15372:2008+A1:2016	Surface resistance to cold liquids for furniture finishes

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements applicable to metal domestic furniture tables
GB/T 4893.8-2013	Surface wear resistance test method applicable to hard furniture finishes
GB/T 10357.1-2013	Table mechanical strength and stability test methods

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements applicable to metal domestic furniture tables；
2. GB/T 4893.8-2013：Surface wear resistance test method applicable to hard furniture finishes；
3. GB/T 10357.1-2013：Table mechanical strength and stability test methods；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · AST-HB-CR-600

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · AST-HB-CR-600

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · AST-HB-CR-600打开导出工具

页面快速操作

发布采购询价

产品描述

The Round Hammered Metal Pedestal Accent Side Table with Crystal Accent (model AST-HB-CR-600) is an unbranded sculptural luxury accent piece defined by its balanced, symmetrical round form and single central pedestal structure. Its circular hammered metallic top sits above a tapered hammered brass-finish metal pedestal, accented by a polished faceted crystal band that adds visual depth, before connecting to a wide black coated metal disc base for a streamlined, elegant silhouette that reads as a deliberate design object rather than purely functional furniture. Constructed for long-term fixed use, the table pairs an 8mm thick hammered cast aluminum alloy top with a silver textured finish, trimmed with a 2mm matte black powder-coated steel rim. The pedestal combines a hammered forged brass-finish aluminum upper stem with geometric faceted texture and a matching hammered brass-finish cast metal lower bulb, separated by a 15mm thick faceted cut lead-free crystal glass accent band with polished edges. The 10mm thick matte black powder-coated carbon steel base features a polished reflective top surface, secured to the pedestal and table top with zinc-plated steel threaded fasteners, with 3mm non-slip rubber pads affixed to its underside. All finished surfaces pass 48-hour neutral salt spray corrosion resistance testing, carry a 2H surface scratch resistance rating, and support a 45kg static top load with 15kg anti-tip stability load offset, delivering a 10-year recommended static service life. The textured non-slip top surface holds drinks, decor, and small table lamps securely, while the underside rubber pads prevent scratches to hardwood, tile, or stone flooring. Smooth sealed metal and glass surfaces allow simple wipe-clean maintenance with a soft dry cloth. The 3-piece knock-down design requires assembly of the top, pedestal, and base with included hardware, taking 40 minutes per set, with no moving parts to adjust after installation. This table suits a range of upscale spaces: it works beside sofas and armchairs in luxury residential living rooms and high-end hotel lounge areas, as a display surface for florals or decor in upscale entry foyers, as a plinth for small luxury goods in boutique retail showrooms, as a designer nightstand in modern bedrooms, and next to guest seating in executive office lounge zones. Procurement teams should note the item ships as one set across two cartons, with a 0.8 cubic meter packaging volume and 120kg packaged gross weight, and account for on-site assembly time when planning installation schedules, ensuring placement allows full clearance for the 380mm diameter base to sit level on finished flooring.

Round Hammered Metal Pedestal Accent Side Table with Crystal Accent Specifications

供应商与现货