纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	500 × 500 × 550 mm
Tabletop diameter	500 mm
Tabletop thickness	12 mm
Leg splay footprint diameter	480 mm
Single leg cross-section width	40 mm
Floor clearance under tabletop	525 mm
Central hub diameter under top	80 mm
Floor contact pad diameter	20 mm
Primary Component Thickness	40 mm according to load-bearing role
Hardware / Moving-part Clearance	5 mm operating clearance

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Tabletop static load capacity	30 kg
Net product weight	13 kg
Sintered stone heat resistance	1200 °C
Surface scratch resistance rating	Level 6 Mohs
Recommended maximum user load for tabletop	30 kg
Metal base static load rating	50 kg
Reference Static Load	150 kg depending on category
Moving-part Durability Reference	Acceptance target 50000 cycles
Recommended Procurement Warranty	Structure 5 years; hardware 3 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop	12mm thick sintered stone with Laurent White Gold linear veined finish
Leg structure	3 pieces of angled matte black powder-coated carbon steel
Central connection hub	Powder-coated steel bracket securing legs to tabletop underside
Floor protection pads	Non-slip, non-marking rubber or plastic caps on each leg end
Tabletop edge finish	Smooth polished straight edge, no bevel
Metal surface coating	Matte black scratch-resistant powder coating
Underside tabletop backing	Fiberglass mesh reinforcement layer
Primary Connector Specification	Reference M6-M10 with at least 2 fixing points at major joints
Reference Finish / Color Count	Recommended 6finish options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Primary use function	Holds drinks, small decor, phones and books beside seating or beds
Structural stability	Three-point tripod leg design eliminates wobble on flat, even floors
Surface protection function	Non-marking foot pads prevent scuffs and scratches on hard flooring
Assembly requirement	Screw-on leg attachment to pre-mounted central hub with included hardware
Height adjustment	Fixed static height with no lift or tilt mechanisms
Mobility function	No casters, designed for fixed stationary placement
Surface maintenance	Non-porous sintered stone top resists stains and allows wipe-clean care
Reference Adjustment / Operating Range	100 mm or 120° where applicable

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Packaging Volume	0.8 m³/set
Reference Packaged Gross Weight	120 kg/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential living room use	Position beside sofas, armchairs or lounge chairs for drink and remote placement
Bedroom use	Place beside beds as a compact nightstand for phones, lamps or books
Small space and balcony use	Suitable for studio apartments, reading nooks or balcony lounge areas
Commercial lounge use	Deploy in office waiting areas, hotel lobbies or cafe lounge seating zones
Recommended pairing	Pair with upholstered sofas, fabric armchairs or platform beds for coordinated styling

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Domestic furniture strength, durability and safety for tables, applicable for performance verification
EN 15372:2016	Furniture surface resistance to dry and wet heat, applicable for sintered stone top testing

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for structural safety checks
GB/T 4893.1-2021	Furniture surface cold liquid resistance test method, applicable for tabletop stain resistance verification
GB/T 10357.1-2013	Furniture mechanical performance test for tables, applicable for static load stability testing

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable for structural safety checks；
2. GB/T 4893.1-2021：Furniture surface cold liquid resistance test method, applicable for tabletop stain resistance verification；
3. GB/T 10357.1-2013：Furniture mechanical performance test for tables, applicable for static load stability testing；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · ST-RND-500-LWG-BLK3

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · ST-RND-500-LWG-BLK3

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · ST-RND-500-LWG-BLK3打开导出工具

页面快速操作

发布采购询价

产品描述

The Laurent White Gold Round Sintered Stone Side Table with Black Tripod Base delivers minimalist modern styling for compact surface placement across residential and commercial settings. Its visual design centers on a circular tabletop marked with subtle linear Laurent White Gold veining, supported by a sleek tripod base finished in matte black, creating a balanced, understated silhouette that complements soft, upholstered furnishings without overwhelming surrounding decor. The fixed tripod structure creates a clean, open visual profile beneath the tabletop, ideal for maintaining a sense of space in smaller areas. The tabletop is crafted from thick sintered stone with a smooth polished straight edge and no bevel, reinforced on the underside with a fiberglass mesh layer for added structural integrity. The support structure uses three angled carbon steel legs connected via a powder-coated steel central hub secured to the tabletop underside, with each leg finished in a scratch-resistant matte black powder coating. Each leg terminates in a non-slip, non-marking rubber or plastic cap that rests directly on floor surfaces. Designed for stationary, fixed placement with no casters or height adjustment mechanisms, the table provides a stable surface for holding drinks, small decor items, mobile phones, and books alongside seating or sleeping areas. The three-point tripod design eliminates wobble on flat, even floors, while the non-marking foot pads prevent scuffs and scratches on hard flooring surfaces. The non-porous sintered stone top resists stains and supports simple wipe-clean maintenance for long-term everyday use. Assembly requires attaching legs to the pre-mounted central hub using included hardware, with a typical assembly time of 40 minutes per unit. This side table fits naturally in residential living rooms positioned beside sofas, armchairs, or lounge chairs, in bedrooms as a compact nightstand, or in studio apartments, reading nooks, and balcony lounge areas. For commercial applications, it works well in office waiting areas, hotel lobbies, and cafe lounge seating zones, pairing seamlessly with upholstered sofas, fabric armchairs, or platform beds for coordinated styling. When sourcing this model, buyers should note the unit ships across two cartons per set, select from the available finish options to align with project design schemes, and account for the fixed static height to ensure compatibility with intended seating or bed heights. The straightforward screw-on assembly process allows for efficient setup across both small residential installations and larger commercial rollouts.

Laurent White Gold Round Sintered Stone Side Table with Black Tripod Base Specifications

供应商与现货