纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1210 × 370 × 1240 mm
Overall assembled dimensions	1210 x 370 x 1240 mm (W x D x H)
Leg height (floor to cabinet base)	150 mm
Upper drawer internal dimensions (each)	580 x 330 x 120 mm (W x D x H)
Lower cabinet internal height (per compartment)	820 mm
Adjustable shelf spacing (minimum to maximum)	160 mm
Door panel thickness	18 mm
Carcass side panel thickness	18 mm
Back panel thickness	9 mm
Edge band thickness	1 mm
Recessed vertical pull length (per door)	320 mm
Top surface usable area	1180 x 350 mm (W x D)
Under-cabinet floor clearance height	130 mm
Carcass Panel Thickness	25 mm
Door / Drawer Front Thickness	22 mm
Shelf Thickness	25 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total shoe storage capacity	30 pairs
Uniformly distributed shelf load rating	15 kg per shelf
Drawer static load rating	10 kg per drawer
Top surface static load rating	30 kg
Hinge open/close cycle rating	80000 cycles
Drawer slide cycle rating	50000 cycles
Anti-tip restraint load rating	50 kg
Static base load rating (legs)	150 kg total
Recommended warranty period	3 years
Shelf Distributed Load	30 kg/shelf

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Main carcass construction	Solid light hardwood (pine/rubber wood) with natural clear matte finish
Lower door panels	Solid wood with horizontal louvered slat construction for cross-ventilation
Upper drawer fronts	Flat solid wood panels with integrated top-edge cutout pulls
Support legs	Solid hardwood tapered angled legs, set inward from cabinet corners
Internal shelves	Solid wood adjustable shelves with metal shelf pin supports
Door hinges	Cold-rolled steel soft-close concealed hinges with nickel plating
Drawer slides	Side-mount cold-rolled steel 3/4 extension slides with zinc finish
Back panel	Engineered hardboard or thin solid wood panel for dust containment
Surface finish	Clear matte water-based lacquer with low VOC content
Edge treatment	Solid wood edge banding matching carcass material, sanded to smooth rounded edges
Edge Band Thickness	2 mm
Primary Connector Specification	Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Ventilated storage	Horizontal louvered door slats provide continuous cross-airflow to reduce moisture and shoe odor
Adjustable shelf configuration	5 internal shelf positions per compartment, adjustable in 32mm increments to accommodate flat shoes, sneakers, and ankle boots
Soft-close door mechanism	Concealed hinges include hydraulic damping to close doors quietly without slamming
Upper drawer storage	Two equal-width upper drawers provide enclosed storage for shoe polish, laces, keys, mail, and small entry accessories
Elevated under-cabinet access	130mm floor clearance allows robot vacuums and manual cleaning tools to access under the cabinet
Anti-tip safety feature	Included wall anchor strap secures cabinet top to wall to prevent tipping when doors/drawers are fully extended
Decorative top surface	Flat reinforced top surface supports potted plants, framed art, key trays, and entryway decor items
Integrated handle design	Recessed cutout pulls on drawers and doors eliminate protruding hardware for a clean, child-safe profile
Cable / Vent Opening Reference	If fitted, 80 mm diameter

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 700× 350 mm/carton according to carcass split
Reference Packaged Gross Weight	100 kg/set in 3 cartons
Reference Packaging Volume	0.65 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential entryway/foyer	Wall-mounted placement against entry walls for daily shoe storage and drop zone use
Apartment hallway	Slim 370mm depth fits narrow residential hallways without obstructing walkways
Rental property furnishing	Durable solid wood construction with neutral natural finish matches most rental interior styles
Small balcony storage	Ventilated louvered design allows damp shoe drying when placed on covered open balconies
Family home with 3-5 residents	30-pair capacity accommodates footwear for small to medium family households
Modern Nordic/Japandi interior schemes	Light natural wood finish, clean lines, and no protruding hardware complement minimalist decor styles

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 14749:2016	Domestic and kitchen storage units and worktops – safety requirements and test methods, applicable for structural stability
EN 13986:2004	Wood-based panels for use in construction – characteristics, evaluation of conformity, applicable for panel material performance
EN 71-3:2019	Safety of toys – migration of certain elements (for child-safe finish checks if used in family entryways)

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for structural strength and finish durability checks
GB 18584-2001	Indoor decorating and refurbishing materials – limit of harmful substances in wood furniture, applicable for formaldehyde emission testing
GB/T 10357.5-2011	Test of mechanical properties of furniture – strength and durability of storage units, applicable for shelf and drawer load testing
GB/T 4897.3-2003	Particleboard for furniture use (if engineered wood components are present), applicable for panel structural performance

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable for structural strength and finish durability checks；
2. GB 18584-2001：Indoor decorating and refurbishing materials – limit of harmful substances in wood furniture, applicable for formaldehyde emission testing；
3. GB/T 10357.5-2011：Test of mechanical properties of furniture – strength and durability of storage units, applicable for shelf and drawer load testing；
4. GB/T 4897.3-2003：Particleboard for furniture use (if engineered wood components are present), applicable for panel structural performance；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · SC-NW-3D2D-1210

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · SC-NW-3D2D-1210

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · SC-NW-3D2D-1210打开导出工具

页面快速操作

发布采购询价

产品描述

This freestanding natural wood louvered 3-door 2-drawer entryway shoe cabinet brings understated, functional storage to entry zones and auxiliary spaces, aligned with minimalist and Nordic design sensibilities. Its elevated form features tapered, angled solid wood legs set inward from the cabinet corners, lifting the cabinet base above the floor to leave clear access for cleaning tools. Horizontal louvered panels cover the three lower cabinet doors, while two upper drawers use flat solid wood fronts with integrated recessed top-edge pulls, eliminating protruding hardware for a clean, unbroken silhouette. A natural clear matte water-based lacquer finish with low VOC content highlights the light tone of the solid pine or rubber wood used for the main carcass, door panels, drawer fronts, legs, and adjustable internal shelves. Door panels and carcass side panels are matched in thickness, with an engineered hardboard or thin solid wood back panel for dust containment. Doors operate on cold-rolled steel soft-close concealed nickel-plated hinges with hydraulic damping to prevent slamming, while drawers use side-mount cold-rolled steel zinc-finished 3/4 extension slides. Adjustable shelves rest on metal pin supports, with multiple positions available to accommodate different footwear styles from flat shoes to ankle boots, and a total storage capacity that holds 30 pairs of shoes. The horizontal louvered door slats enable continuous cross-airflow to reduce moisture and trapped shoe odor, while the two upper drawers offer enclosed storage for small entry items like shoe care supplies, keys, mail, and accessories. The flat reinforced top surface supports decorative items such as potted plants, framed art, and key trays, and an included anti-tip wall anchor secures the unit to prevent tipping when doors or drawers are fully extended. The unit’s slim depth fits narrow residential hallways without blocking walkways, making it suitable for home entryways and foyers, apartment hallways, rental properties, and covered small balconies where its ventilated design supports gentle drying of damp footwear. Its neutral natural wood finish complements modern Nordic and Japandi interior schemes, and its storage capacity suits households of three to five residents. When procuring this unit, note that assembly is required, with the set shipped across multiple cartons. The floor clearance beneath the elevated base supports convenient under-cabinet cleaning, while the durable solid wood construction is suited for consistent daily use. Weight ratings apply to shelves, drawers, and the top surface, so storage loads should align with these limits to maintain long-term function.

Natural Wood Louvered 3-Door 2-Drawer Elevated-Leg Entryway Shoe Cabinet Specifications

供应商与现货