The Fanshidun Modern Minimalist Curved Back Upholstered Dining Armchair, model DAC-CURV-BLK-LGY-001, presents a streamlined, cohesive silhouette defined by its continuous integrated curved arm and back structure, paired with slender tapered legs that lend a light, unobtrusive visual presence suitable for spaces where reduced visual weight is preferred. Its neutral two-tone finish pairs a matte black frame and legs with soft light gray matte woven polyester seat upholstery, creating a versatile aesthetic that aligns with understated contemporary interior schemes. Constructed for durable daily use, the chair’s integrated arm and back frame is crafted from solid hardwood finished with smooth matte black lacquer, supported by matching solid hardwood tapered legs with a black stained finish. Joints are secured with zinc-plated steel bolts and dowel connectors for knock-down assembly, while 5mm thick non-slip felt pads fitted to the bottom of each leg prevent scuffing on hard flooring surfaces. The seat rests on a bent plywood support board, topped with a 114mm thick high-density polyurethane foam cushion with a 30 kg/m³ density and 45% rebound rate, upholstered in light gray woven polyester fabric rated for 30000 Martindale abrasion cycles, with seams stitched at 8 stitches per 30mm for consistent durability. Fully assembled, the chair measures 584 x 600 x 826 mm, with a 490mm seat height, 480mm width between armrests, 457mm seat depth, 680mm armrest height, and 336mm backrest height above the seat; each leg tapers to a 30mm diameter at floor contact. Designed for fixed upright dining posture with no recline or swivel function, the chair features four-point floor contact for stable seating, and its continuous curved armrests provide consistent forearm support for seated users. The fixed non-removable seat cushion stays securely positioned during use, though the curved armrest shape and splayed leg configuration prevent stacking for storage. Each chair has a 7kg net weight, with a 150kg static seat load capacity, 200kg frame joint static load rating, and 110kg recommended user weight limit. This chair is well suited for a range of residential and light commercial settings: it works as primary guest seating for residential dining rooms paired with standard 750mm height dining tables, fits compact small apartment dining nooks thanks to its slim leg profile, serves as durable casual seating for cafes and bistros, provides compact short-term visitor seating beside home office desks including 2.4m executive desks, and integrates seamlessly into modern hotel restaurant and banquet spaces with its neutral finish palette. Procurement teams should note the knock-down assembly requirement, with an 40 minutes of assembly time per set; each set ships in 2 cartons with a total packaged gross weight of 23kg and total carton volume of 0.26 m³, with 135 sets fitting in a 20GP container at 85% space utilization. The non-stackable design should be factored into on-site storage plans to avoid unnecessary space allocation.