纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	560 × 520 × 740 mm
Seat height	480 mm
Seat width	470 mm
Seat depth	420 mm
Backrest height	280 mm
Armrest height above floor	710 mm
Armrest height above seat	230 mm
Frame tube diameter	19 mm
Leg taper width at floor	12 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net weight per chair	7 kg
Static seat load capacity	136 kg
Recommended maximum user weight	120 kg
Upholstery abrasion resistance	30000 Martindale cycles
Stackable quantity per stack	8 chairs
Seat foam density	40 kg/m³
Seat foam thickness	64 mm
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Main frame	1mm wall cold-rolled steel tube with matte black powder coat finish
Seat substrate	9mm thick plywood panel
Backrest substrate	9mm thick curved plywood panel
Seat cushion padding	High-density polyurethane foam, 64mm thick
Backrest padding	High-density polyurethane foam, 20mm thick
Upholstery fabric	Woven polyester fabric with stain-resistant treatment
Floor glides	Injection-molded nylon pads with rubber contact face
Frame weld points	TIG-welded joints with powder coat touch-up
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Seating configuration	Fixed non-swivel, non-reclining four-leg base
Floor protection	Non-marking nylon glides prevent hard floor scratching
Stacking capability	Vertical nesting storage for up to 8 chairs
Armrest support	Integrated continuous frame armrests support 45kg static side load
Color customization	Upholstery available in black, light gray, orange as shown
Assembly requirement	Knock-down delivery with included hex key hardware
Cleaning compatibility	Upholstery supports spot cleaning with mild detergent
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Conference room seating	Side/guest seating for meeting rooms with clean, lightweight modern aesthetic
Waiting area use	Public reception and lounge waiting areas for 2 hour visitor seating
Dining space use	Residential or commercial dining seating matching minimalist interior schemes
Co-working breakout zones	Flexible stackable seating for collaborative open office areas
Hotel public areas	Lobby and corridor side seating for transient guest use
Recommended table pairing	Compatible with 760 mm height standard dining and conference tables
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Office seating safety	EN 1335:2018 Office furniture - Office work chair - Safety requirements (applicable to guest seating performance)
Non-domestic seating strength	EN 16139:2013 Furniture - Strength, durability and safety for non-domestic seating
Furniture surface flammability	EN 1021:2014 Upholstered furniture - Ignitability by smouldering cigarette

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

Lounge and guest seating safety	ANSI/BIFMA X2020Lounge and Public Seating - Safety and durability requirements
Seating static load test	ANSI/BIFMA X5.41 static load test requirement for seat and back components

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Seating structural safety	GB/T 3324General technical requirements for wooden furniture (applicable to upholstered seating substrates)
Metal furniture structural safety	GB/T 3325General technical requirements for metal furniture (applicable to steel frame components)
Upholstered furniture durability	GB/T 28202Leather and fabric upholstered furniture durability test methods
Formaldehyde emission limit	GB 18584Formaldehyde emission limits for interior decoration materials (wood-based furniture)

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Seating structural safety：GB/T 3324General technical requirements for wooden furniture (applicable to upholstered seating substrates)；
2. Metal furniture structural safety：GB/T 3325General technical requirements for metal furniture (applicable to steel frame components)；
3. Upholstered furniture durability：GB/T 28202Leather and fabric upholstered furniture durability test methods；
4. Formaldehyde emission limit：GB 18584Formaldehyde emission limits for interior decoration materials (wood-based furniture)；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · GUEST-ARM-001

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · GUEST-ARM-001

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · GUEST-ARM-001打开导出工具

页面快速操作

发布采购询价

产品描述

The Minimalist Upholstered Guest Armchair (model GUEST-ARM-001, unbranded) features a streamlined, contemporary silhouette defined by clean, unadorned lines and balanced proportions. Its arched upholstered backrest and padded seat sit within a slim four-leg black metal frame, with integrated continuous armrests that flow seamlessly from leg to upper frame for a cohesive, uncluttered visual profile. The fixed, non-swivel, non-reclining structure creates a neat, orderly layout suitable for spaces prioritizing understated modern design.
The chair’s frame is constructed from 1mm wall cold-rolled steel tube with a matte black powder-coated finish, joined with TIG-welded joints finished with matching powder coat touch-up for consistent appearance. The seat rests on a plywood support structure, topped with 64mm thick high-density polyurethane foam, while the curved backrest uses a curved plywood base with 20mm thick high-density polyurethane foam padding. All upholstered surfaces are covered in woven polyester fabric treated for stain resistance, with 30000 Martindale abrasion resistance for regular public use. Injection-molded nylon glides with rubber contact faces are fitted to each leg base. Each chair has a net weight of 7 kg, supports a 120 kg maximum recommended user weight, and its integrated armrests withstand 45 kg of static side load. Non-marking glides prevent scratches to hard flooring, and the vertical stacking design allows storage of up to 8 chairs to minimize unused floor space during low-traffic periods. The upholstery supports spot cleaning with mild detergent for simple, routine maintenance. Upholstery is offered in black, light gray, and orange, and the chair ships as knock-down units with included hex key hardware, requiring 40 minutes of assembly per set.
This armchair fits a wide range of public and semi-public settings, serving as side or guest seating for conference rooms paired with 760mm height standard tables, visitor seating for reception and lounge waiting areas for short 2-hour stays, seating for residential or commercial dining spaces aligned with minimalist interiors, flexible stackable seating for co-working breakout zones, and transient side seating for hotel lobbies and corridors.
Procurement teams should note the chair ships 1 set across 2 cartons, with a packaged gross weight of 23 kg per set and total carton volume of 0.26 m³ per set, allowing 135 sets to fit in a 20GP container at 85% space utilization.

Minimalist Upholstered Guest Armchair with Black Metal Frame Specifications

供应商与现货