基础物理尺寸
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源:工厂资料结构化字段,最终以实测值为准
| 产品外部尺寸(宽 × 深 × 高) | 2400 × 1000 × 750 mm | |
|---|---|---|
| tabletop thickness | 45 mm | |
| leg cross-section | 50 x 50 mm | |
| end U-frame stretcher height | 100 mm | |
| central longitudinal stretcher height | 120 mm | |
| under-table knee clearance height | 705 mm | |
| lengthwise overhang per end | 150 mm | |
| widthwise overhang per side | 50 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
重量、承重与性能参数
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源:产品性能数据,采购前请核对具体测试口径
| distributed tabletop static load | 150 kg | |
|---|---|---|
| table net weight | 70 kg | |
| seating capacity | 8 persons | |
| finish abrasion resistance | 1000 cycles | |
| wood moisture content | 12% | |
| joint static shear load | 500 kg per connector | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
材质与结构参数
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源:以工厂材质清单与验货报告为准
| tabletop | Solid hardwood, walnut brown matte lacquer finish | |
|---|---|---|
| vertical legs | Solid hardwood, matching walnut stain, tapered profile | |
| end U-frame stretchers | Solid hardwood, floor-mounted support feet | |
| central longitudinal stretcher | Solid hardwood, cross-braced between end frames | |
| surface finish | Low-VOC matte nitrocellulose lacquer, 0.15mm dry film thickness | |
| assembly hardware | Zinc-plated steel bolts and barrel nuts, 8mm diameter | |
| floor contact pads | Non-marking felt pads, 5mm thickness | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
功能与调节参数
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源:功能配置参数,以供应商正式规格为准
| base support structure | Dual U-shaped end trestles connected by full-length central stretcher for lateral rigidity | |
|---|---|---|
| assembly type | Knock-down flat-pack assembly with included hardware and instructions | |
| seating access | Open under-table clearance to accommodate 3 chairs per long side and 1 per end | |
| floor protection | Felt pads on all base feet prevent scratches to hard flooring surfaces | |
| surface maintenance | Matte finish resists minor water rings, wipes clean with dry or damp soft cloth | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
包装与物流参数
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源:外贸报价与装柜测算参考
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
应用场景与使用方式
推荐空间 / 目标用户 / 使用方式
数据来源:依据产品结构与品类整理的推荐应用场景
| residential dining room | Seats 8people for family meals and casual gatherings | |
|---|---|---|
| open-plan kitchen diner | Walnut brown finish complements modern and mid-century interior schemes | |
| small office break room | Provides durable seating for staff meal breaks and informal meetings | |
| restaurant private dining booth | Works for fixed premium dining seating with stable trestle base |
欧盟市场准入要求 * EN 标准
欧洲市场准入与化学品要求
| EN 12521:2015 | Furniture - Strength, durability and safety for domestic dining tables, applicable for performance testing |
|---|
适用于中国市场项目的标准 * GB 标准
适用于中国市场项目的标准
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for dimensional and structural tolerance checks | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances for wood furniture, applicable for formaldehyde emission verification |
本产品须满足以下技术参数要求: 1. GB/T 3324-2017:General technical requirements for wooden furniture, applicable for dimensional and structural tolerance checks; 2. GB 18584-2001:Indoor decorating and refurbishing materials - limit of harmful substances for wood furniture, applicable for formaldehyde emission verification; 最终交付参数、检测报告和验收标准以双方采购合同为准。
一键导出完整商品资料
以下文件均根据当前已发布商品参数实时生成。
完整参数报告 PDF
直接下载英文参数报告,可选择公制或英制单位。
完整参数 Excel
导出全部商品信息与参数模块,文件内容统一使用英文。
外贸 Listing 模板
包含英文标题、规格、材质、标准和采购字段,可用于国际平台刊登。
海关申报数据
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具