纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	900 × 900 × 750 mm
Overall table dimensions	900 x 900 x 750 mm
Under-table knee clearance height	690 mm
Table leg cross-section	40 x 40 mm
Tabletop edge thickness	25 mm
Chair seat dimensions	430 x 380 mm
Chair seat height from floor	450 mm
Chair backrest height from seat	330 mm
Chair leg diameter	28 mm
Set footprint with chairs pushed in	1600 x 1600 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total set net weight	60 kg
Tabletop uniform static load capacity	50 kg
Recommended number of seated users	4
Seat foam density	45 kg/m³
Seat foam thickness	50 mm
Upholstery abrasion resistance	25000 Martindale cycles
Recommended service life	10 years
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop	Natural oak veneer over MDF core, matte lacquer finish
Table legs	Solid natural oak wood, tapered cylindrical shape
Chair frame	Solid natural oak wood, joined with mortise and tenon hardware
Chair backrest	Curved solid oak top rail with vertical support posts
Chair seat upholstery	Black polyester fabric upholstery
Seat padding	Medium-density polyurethane foam over webbing support
Floor protection pads	Adhesive non-slip felt pads on all leg bases
Joinery hardware	Zinc-plated steel bolts and wood dowels
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Assembly requirement	Table legs require bolt-on attachment, chairs ship fully assembled
Seating flexibility	Armless chairs tuck fully under table when not in use to save space
Surface maintenance	Matte lacquer finish wipes clean with soft damp cloth, resists everyday water rings
Stability design	Four corner-mounted legs provide equal weight distribution, no rocking on flat floors
Upholstery care	Fabric upholstery is spot-clean only with mild upholstery detergent
Floor protection	Felt leg pads prevent scratches and reduce noise when repositioning
Non-extendable design	Fixed square tabletop with no pull-out leaves or extension mechanisms
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Total gross shipping weight	68 kg
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Apartment dining nook	Compact 900mm square footprint fits small open-plan kitchen dining areas
Small family dining	4-seat configuration supports daily meals for 4person households
Casual breakfast area	Standard dining height works for quick meals adjacent to kitchen counters
Rental property furnishing	Durable matte finish and neutral styling suits long-term residential rental fit-outs
Cafe bistro seating	Light wood and black upholstery aesthetic matches casual specialty cafe interiors
Home office break room	Compact size fits small office staff kitchen and break areas for 4 people
Studio apartment multi-use surface	Flat tabletop doubles as casual work surface when not used for dining
Recommended Matching Desk Size	2.4 m executive desk

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12520:2015	Furniture - Strength, durability and safety for domestic seating
EN 1022:2018	Furniture - Seating - Determination of stability
EN 15372:2016	Furniture - Strength, durability and safety for domestic tables

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applies to domestic use inspection
GB 18584-2001	Limit of harmful substances in wood furniture, formaldehyde emission ≤1.5mg/L
GB/T 17657-2013	Test methods for surface physicochemical properties of wood-based panels

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applies to domestic use inspection；
2. GB 18584-2001：Limit of harmful substances in wood furniture, formaldehyde emission ≤1.5mg/L；
3. GB/T 17657-2013：Test methods for surface physicochemical properties of wood-based panels；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · SQDT-OAK-4S-BKCH

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · SQDT-OAK-4S-BKCH

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · SQDT-OAK-4S-BKCH打开导出工具

页面快速操作

发布采购询价

产品描述

The Light Oak 4-Seater Square Dining Table Set with Black Upholstered Armless Chairs, model SQDT-OAK-4S-BKCH, delivers a minimalist, Nordic-inspired aesthetic anchored by warm light oak tones and contrasting black seating, suited to a range of casual and residential settings. Its fixed, non-extendable square tabletop measures 900 x 900 x 750 mm, with a 25 mm thick edge finished in matte lacquer over a natural oak veneer and MDF core. Four tapered cylindrical solid oak legs, each with a 40 x 40 mm cross-section, mount to the table corners for even weight distribution and stable, rock-free placement on flat surfaces, leaving 690 mm of clear under-table knee space. Adhesive non-slip felt pads affixed to all leg bases prevent floor scratches and cut down on noise during repositioning. The set includes four matching armless chairs, built with solid oak frames joined via mortise and tenon connections, zinc-plated steel bolts, and wood dowels for long-term structural integrity. Each chair measures 520 x 470 x 780 mm, with a curved solid oak top rail and vertical support posts forming the backrest, which sits 330 mm above the 450 mm high seat. Seats are supported by a 14 mm bent plywood board over webbing, padded with 50 mm thick, 45 kg/m³ medium-density polyurethane foam, and upholstered in black polyester fabric rated for 25000 Martindale abrasion cycles. The armless design allows chairs to tuck fully under the table when not in use to minimize occupied floor space. The table supports a 50 kg uniform static load across its surface, which wipes clean easily with a soft damp cloth and resists everyday water rings; fabric upholstery requires spot cleaning with mild upholstery detergent. The full set has a 60 kg net weight, with a recommended service life of 10 years for regular use. Chairs ship fully assembled, while table legs require simple bolt-on attachment with a 40 minute assembly time per set, shipped across two cartons. This set fits compact apartment dining nooks, small family daily meal spaces, casual kitchen breakfast areas, long-term rental property furnishing, casual cafe bistro seating, and small home office break rooms that accommodate up to four users. Procurement teams should note the fixed non-extendable design cannot be expanded for larger groups, and plan for shipping logistics aligned with the 68 kg total gross weight, 0.26 m³ total carton volume per set.

Light Oak 4-Seater Square Dining Table Set with Black Upholstered Armless Chairs Specifications

供应商与现货