纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	800 × 800 × 450 mm
Tabletop thickness	50 mm
Leg diameter	60 mm
Lower slatted shelf width	680 mm
Lower slatted shelf depth	680 mm
Vertical clearance between tabletop and lower shelf	240 mm
Floor clearance under lower shelf	160 mm
Corner radius	30 mm
Slat width on lower shelf	60 mm
Gap between lower shelf slats	10 mm
Carcass Panel Thickness	25 mm
Back Panel Thickness	9 mm
Door / Drawer Front Thickness	22 mm
Shelf Thickness	25 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Tabletop maximum distributed static load	136 kg
Lower slatted shelf maximum static load	25 kg
Table net weight	18 kg
Recommended maximum number of users	4
Finish abrasion resistance	2000 cycles
Wood moisture content	12%
Assembly fastener torque retention	12 months
Shelf Distributed Load	30 kg/shelf
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Angle / Life	165°; 80000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop panel	Solid rubberwood with matte clear acrylic lacquer finish
Support legs	Solid cylindrical rubberwood, smooth sanded finish
Lower slatted shelf	Solid wood slats attached to solid wood side frame rails
Joinery hardware	Zinc-plated steel hanger bolts and barrel nuts
Edge treatment	Fully rounded and sanded 30mm radius corners, no sharp edges
Surface finish	Matte UV-cured clear lacquer, 0.1mm dry film thickness
Foot pads	Non-slip PE plastic floor protectors fitted to leg bases
Shelf slats	9 evenly spaced solid wood slats fixed to side rails
Edge Band Thickness	2 mm
Primary Connector Specification	Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints
Reference Finish / Color Count	Recommended 6finish options

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Lower open storage	Fixed full-width slatted shelf for books, magazines and display items
Surface use	Flat rounded-corner tabletop supports drinks, decor and small objects
Assembly design	Knock-down construction requiring standard hex key assembly
Floor protection	Integrated non-slip foot pads prevent floor scratches and sliding
Cleaning maintenance	Smooth sealed surface allows wipe-clean with damp soft cloth
Stability design	Four wide-set cylindrical legs provide even weight distribution across base
Cable / Vent Opening Reference	If fitted, 80 mm diameter

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 700× 350 mm/carton according to carcass split
Reference Packaged Gross Weight	100 kg/set in 3 cartons
Reference Packaging Volume	0.65 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Living room center placement	Suits placement in front of 3seater sofas for drinks and decor use
Small apartment lounge use	800mm square footprint fits compact living spaces without crowding
Reading nook side table	Can be used as a large side table next to accent chairs for books and lighting
Light natural decor schemes	Matches Scandinavian, Japandi and minimalist light wood interior styles
Family residential use	Rounded corners reduce impact injury risk for children and pets

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Furniture strength, durability and safety for residential tables, applicable for structural performance acceptance
EN 71-3:2019	Migration of certain elements for furniture accessible to children, applicable for rounded edge safety

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for dimensional and structural acceptance
GB 18584-2001	Indoor decoration material limit of harmful substances for wooden furniture, applicable for formaldehyde testing
GB/T 4893.4-2013	Surface abrasion resistance test for furniture finishes, applicable for finish durability acceptance

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable for dimensional and structural acceptance；
2. GB 18584-2001：Indoor decoration material limit of harmful substances for wooden furniture, applicable for formaldehyde testing；
3. GB/T 4893.4-2013：Surface abrasion resistance test for furniture finishes, applicable for finish durability acceptance；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · SQ-CT-8045-SLAT

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · SQ-CT-8045-SLAT

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · SQ-CT-8045-SLAT打开导出工具

页面快速操作

发布采购询价

产品描述

The SQ-CT-8045-SLAT square coffee table, an unbranded living room occasional table, features a clean Scandinavian and minimalist design defined by soft rounded edge profiles and light natural wood tones. Its balanced, proportionate layout centers on a square tabletop supported by four cylindrical, wide-set legs, with a fixed open slatted lower shelf positioned between the tabletop and floor. The table carries a consistent light natural wood finish across all visible surfaces, creating a warm, understated visual presence that fits seamlessly into light-focused interior schemes. The structure is built entirely from solid rubberwood, finished with a matte UV-cured clear lacquer that creates a smooth, sealed surface. Cylindrical solid rubberwood legs connect to the tabletop and lower shelf frame using zinc-plated steel hanger bolts and barrel nuts for reliable joinery. The lower shelf uses nine evenly spaced solid wood slats mounted to solid wood side frame rails, and all tabletop corners are fully rounded and sanded to eliminate sharp edges. Non-slip PE plastic floor protectors are fitted to the base of each leg, and the knock-down design uses standard hex key fasteners for assembly. The flat, rounded-corner tabletop provides a stable surface for holding drinks, decorative pieces, and small everyday items, while the open slatted lower shelf offers dedicated space for storing books, magazines, or curated display pieces. The integrated non-slip foot pads prevent unintended sliding and protect hard flooring from surface scratches, and the smooth sealed finish allows simple maintenance with wipe-clean care using a damp soft cloth. The four wide-set legs deliver even weight distribution across the base for steady, balanced support. This table works well in a range of residential and light commercial spaces: it is sized for central placement in front of three-seater sofas in standard living rooms, fits easily into compact small apartment lounges without creating visual or physical crowding, and can serve as an oversized side table next to accent chairs in dedicated reading nooks. Its light natural wood finish coordinates naturally with Scandinavian, Japandi, and minimalist decor palettes, and its rounded corner design reduces impact injury risk, making it a practical choice for family homes with children and pets. For procurement planning, note that the product ships in knock-down form with reference assembly time of 40 minutes per unit. Buyers should account for multi-carton packaging when arranging delivery and storage, and confirm torque retention specifications for assembly fasteners to support long-term structural performance. The table is rated to support up to four users, with separate distributed static load limits for the tabletop and lower shelf, so teams should review capacity guidelines to align with intended use cases.

Light Natural Wood Square Coffee Table with Slatted Lower Storage Shelf Specifications

供应商与现货