纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1000 × 1000 × 760 mm
Tabletop thickness	28 mm
Leg clearance height (under cross brace)	630 mm
Tapered leg top section	60 x 60 mm
Tapered leg bottom section	30 x 30 mm
Cross stretcher width	50 mm
Leg splay angle from vertical	12 degrees
Edge profile radius	5 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Tabletop distributed static load capacity	250 kg
Net weight of assembled table	32 kg
Seating capacity	4 people
Lateral stability wobble limit	1 mm
Finish abrasion resistance	1000 cycles
Recommended minimum room area for use	6 sqm
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop	Solid natural oak with open matte lacquer finish
Table legs	Solid natural oak tapered sections with matching finish
Cross stretcher bracing	Solid natural oak horizontal rails
Foot glides	Black polymer non-slip floor protection pads
Joinery hardware	Zinc-plated steel bolt connectors with dowel joints
Wood moisture content	12%
Lacquer coat layers	3 coats of low-VOC matte lacquer
Underside structural block	Solid wood reinforcement at leg-to-top joints
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Floor protection	Fixed polymer glides prevent floor scratching during movement
Knockdown assembly	Legs and stretchers bolt to tabletop for flat-pack transport
Leveling compatibility	Fixed glides accommodate 2mm thick adhesive felt pads for uneven floors
Perimeter seating access	Splayed legs create unobstructed knee space for 4 diners
Surface maintenance	Matte finish allows damp cloth cleaning without water damage
Under-table clearance	630mm knee clearance fits standard dining chairs with armrests
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Main carton (tabletop) dimensions	1100 x 1100 x 120 mm
Hardware/leg carton dimensions	850 x 220 x 120 mm
Total shipping gross weight	37 kg
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential small dining room	Fits 8sqm dining spaces with 4-person casual dining capacity
Apartment kitchen breakfast nook	Compact round footprint fits narrow kitchen dining zones
Small office breakout area	Provides casual meeting and lunch seating for staff teams
Studio open-plan living space	Light wood finish complements Scandinavian minimalist interiors
Cafe small dining zone	Durable solid wood build supports daily commercial light use
Recommended seating pairing	Four standard dining chairs with 450mm seat height for ergonomic use

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Applicable to safety, strength and durability for domestic dining tables
EN 1022:2018	Applicable to stability testing for domestic seating and tables

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	Applicable to general technical requirements for wooden furniture
GB/T 4893.1-2021	Applicable to surface wear resistance testing of furniture finishes
GB 18584-2001	Applicable to formaldehyde emission limits for wooden interior furniture

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：Applicable to general technical requirements for wooden furniture；
2. GB/T 4893.1-2021：Applicable to surface wear resistance testing of furniture finishes；
3. GB 18584-2001：Applicable to formaldehyde emission limits for wooden interior furniture；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · RDT-SW-SL-1000-NAT

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · RDT-SW-SL-1000-NAT

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · RDT-SW-SL-1000-NAT打开导出工具

页面快速操作

发布采购询价

产品描述

This unbranded fixed round dining table, model RDT-SW-SL-1000-NAT, features a refined Scandinavian minimalist silhouette defined by a smooth circular top and four splayed tapered legs angled outward for an open, uncluttered visual profile. The table’s edge is shaped with a soft radius to remove sharp corners, while a cross stretcher connects the legs to reinforce the frame without interrupting the clean, streamlined layout. Constructed entirely from natural solid oak across the tabletop, leg assembly, and cross stretcher bracing, the piece is finished with three coats of low-VOC matte lacquer that highlights the wood’s natural grain while delivering a soft, non-reflective surface. Solid wood reinforcement blocks are integrated at every leg-to-tabletop joint, with zinc-plated steel bolt connectors and dowel joints creating rigid, long-lasting connections. Black polymer non-slip foot glides are fitted to each leg base, and all wood components are conditioned to a stable moisture content to support long-term structural integrity. Designed for practical daily use, the table seats four people comfortably, with splayed leg placement creating unobstructed knee space that accommodates standard dining chairs with armrests. The fixed polymer glides prevent floor scratching during movement, and can accept adhesive felt pads to sit level on slightly uneven floors. The matte lacquer finish supports simple cleaning with a damp cloth without risk of water damage, and the knockdown assembly design allows flat-pack transport and straightforward on-site setup. This table is well suited for a range of compact spaces, including small residential dining rooms, apartment kitchen breakfast nooks, open-plan studio living areas aligned with minimalist interior schemes, small office breakout zones for casual meetings and staff meals, and light-use cafe small dining areas. It fits spaces meeting the minimum recommended area for use, pairing ergonomically with four standard dining chairs of appropriate seat height. For procurement, stakeholders should note the two-carton flat-pack shipping configuration, total shipping gross weight, and required assembly labor; the piece supports light commercial daily use and aligns with Scandinavian or minimalist design specifications across both residential and contract settings.

Minimalist Natural Solid Wood Round Dining Table with Splayed Tapered Legs Specifications

供应商与现货